Impact of Pavement Thermophysical Properties on Surface Temperatures
Publication: Journal of Materials in Civil Engineering
Volume 19, Issue 8
Abstract
A one-dimensional mathematical model was developed, based on the fundamental energy balance, to calculate the pavement near-surface temperatures using hourly measured solar radiation, air temperature, dew-point temperature, and wind velocity data. An analysis was conducted to predict the diurnal temperature effects of pavement thermophysical properties with the aim of seeking an optimum composition of paving materials for future infrastructure projects. Appropriate paving materials not only ensure stability and safety for road users, but also the ability to mitigate heat absorption and high surface temperatures contributing to the Urban Heat Island Effect and human comfort. This paper evaluated the effects and sensitivities of the thermophysical properties on the pavement surface temperatures. The results indicated that both albedo and emissivity have the highest positive effects on pavement maximum and minimum temperatures, respectively, while increasing the thermal conductivity, diffusivity, and volumetric heat capacity help in mitigating the maximum but not the minimum pavement near-surface temperature.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers wish to thank the American Concrete Pavement Association, CEMEX S.A.B. de C.V. and CEMEX USA, the National Asphalt Paving Association, the Arizona Cement Association, the Arizona Department of Transportation, the City of Phoenix, Arizona, and the National Center of Excellence on SMART Innovations on Urban Climate and Energy at Arizona State University—a sponsored partnership with the U.S. Environmental Protection Agency. This material was based in part on work supported by the National Science Foundation, while one of the writers (P. E. P.) was working at the Foundation. Any opinion, findings, and conclusions or recommendations expressed in this material are those of the writers and do not necessarily reflect the views of the National Science Foundation.
References
Akbari, H. (1995). “Cooling our communities: An overview of Heat Island project activities.” Annual Rep., Heat Island Group, Lawrence Berkeley National Laboratory, Berkeley, Calif.
Akbari, H., Pomerantz, M., and Taha, H. (1996). “Policies to reduce Heat Islands: Magnitudes of benefits and incentives to achieve them.” Proc., 1996 LBL-38679, ACEEE Summer Study on Energy Efficiency in Buildings, Vol. 9.
Asaeda, T., and Thanh, V. (2000). “Characteristics of permeable pavement during hot summer weather and impact on the thermal environment.” Building and Environmental Rep. No. 35, 363–375.
ASHRAE. (2005). Handbook of fundamentals, American Society of Heating, Refrigerating, and Air-Conditioning Engineers, Atlanta.
Barnes, K., Morgan, J., and Roberge, M. (2001). “Impervious surfaces and the quality of natural and built environment.” Dept. of Geography and Environmental Planning, Towson Univ., Baltimore.
Best, M. J. (1998). “A model to predict surface temperatures.” Boundary-Layer Meteorol., 88(2), 279–306.
Çengel, Y. (2003). Heat transfer. A practical approach, 2nd Ed., McGraw-Hill, New York, 83, 368–375, and 578.
Chiasson, A., Spitler, J., Rees, S., and Smith, M. (2000). “A model for simulating the performance of a pavement heating system as a supplemental heat rejecter with closed-loop ground-source heat pump systems.” J. Sol. Energy Eng., 122, 183–191.
Corlew, J. S., and Dickson, P. F. (1968). “Methods for calculating temperature profiles of hot-mix asphalt concrete as related to the construction of asphalt pavements.” Asphalt Paving Technology 1968, Proc., Association of Asphalt Paving Technologists Technical Sessions, Vol. 37, 101–140.
Golden, J. S. (2004). “The built environment induced urban Heat Island effect in rapidly urbanizing arid regions—A sustainable urban engineering complexity.” Environmental Sciences, 1(4), 321–349.
Golden, J. S., and Kaloush, K. (2006). “Mesoscale and microscale evaluation of surface pavement impacts on the urban Heat Island effects.” Int. J. Pavement Eng., 7(1), 37–52.
Gray, K. A., and Finster, M. E. (2000). “The urban Heat Island photochemical smog, and Chicago: Local features of the problem and solution.” Dept. of Civil Engineering, Northwestern Univ., Evanston, Ill.
Heath, M. T. (2002). Scientific computing, an introductory survey, 2nd Ed., McGraw-Hill, New York, 460–461.
Kinouchi, T., Yoshinaka, T., Fukae, N., and Kanda, M. (2004). “Development of cool pavement with dark colored high albedo coating.” 5th Symp. on the Urban Environment, Vancouver, BC, 207–210.
National Cooperative Highway Research Program (NCHRP). (2004). “Guide for mechanistic-empirical design of new and rehabilitated pavement structures.” Final Rep. No. 1-37A, Part 2: Design Inputs, Chapter 3: Environmental Effects, Transportation Research Board, National Research Council, Washington, D.C.
Oke, T. R. (1987). Boundary layer climates, 2nd Ed., Routledge, London.
Pomerantz, M., Ponm, B., Akbari, H., and Chang, S. C. (2000). “The effects of pavement temperatures on air temperatures in large cities.” Heat Island Group, Lawrence Berkeley National Laboratory, LBNL-43442, Berkeley, Calif.
Schindler, A. K., Ruiz, J. M., Rasmussen, R. O., Chang, G. K., and Wathne, L. G. (2004). “Concrete pavement temperature prediction and case studies with the FHWA HIPERPAV models.” Cem. Concr. Compos., 26(5), 463–471.
Souza, L., Rodrigues, D., and Mendes, J. (2003). “Sky view factors estimation using a 3D-GIS extension.” 8th Int. IBPSA Conf., Eindhoven, The Netherlands, 1227–1234.
Taha, H., Akbari, H., Rosenfeld, A., and Huang, J. (1988). “Residential cooling loads and the urban Heat Island—The effects of Albedo.” Build. Environ., 23(4), 271–283.
U.S. Army Corps. of Engineers (USACE). (1988). “Arctic and subarctic construction calculation methods for determination of depths of freeze and thaw in soils.” Technical manual TM 5-852-6/AFR88-19, Vol. 6, Vicksburg, Miss., 2–6.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Dec 7, 2005
Accepted: Apr 18, 2006
Published online: Aug 1, 2007
Published in print: Aug 2007
Notes
Note. Associate Editor: John S. Popovics
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.