Evaluation and Modeling of Repeated Load Test Data of Asphalt Concrete for Mechanistic-Empirical Pavement Design
Publication: Journal of Materials in Civil Engineering
Volume 19, Issue 11
Abstract
The Mechanistic-Empirical Pavement Design Guide (MEPDG) made available by the National Cooperative Highway Research Program in 2004 uses a power model that incorporates dynamic modulus (DM) as a factor in predicting rutting performance of asphalt concrete. The rutting model is empirical and the rutting profiles obtained from the model are based largely on the adjustment of calibration constants, not the DM. Various DM values would be capable of producing similar rutting profiles based on the current model. This study evaluates using accumulated strain data obtained from the Repeated Load Test (RLT) as an alternative to using DM. In addition, a model to represent the accumulated strain data obtained from the RLT is developed. The accuracy and behavior of the current model and the model developed in this study in representing a mix from Louisiana are compared. Alternatives for incorporating the RLT data into the MEPDG are also presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2003). “Standard test method for dynamic modulus of asphalt mixtures.” D 3497-79, ⟨www.astm.org⟩ (Jan. 2006).
Dongré, R., Myers, L., D’Angelo, J., Paugh, C., and Gudimettla, J. (2005). “Field evaluation of Witczak and Hirsch models for predicting dynamic modulus of hot-mix asphalt.” AAPT, 74, 381–442.
Findley, W., Lai, J., and Onaran, K. (1989). Creep and relaxation of nonlinear viscoelastic materials, Dover Publications, Inc., New York.
Myers, L., Gudimettla, J., Paugh, C., D’ Angelo, J., Gohkale, S., and Choubane, B. (2005). “Evaluation of performance data from repeated load test.” FHWA, Office of Pavement Technology, Washington, D.C.
National Cooperative Highway Research Program (NCHRP). (2004). Appendix GG-1: Calibration of permanent deformation models for flexible pavements.” Guide for mechanistic-empirical design of new and rehabilitated pavement structures, ⟨www.trb.org/mepdg/2appendices_GG.pdf⟩ (Nov. 2005).
Von Quintus, H. (2005). “Local calibration guidance for the recommended guide for mechanistic-empirical design of new and rehabilitated pavement structures.” NCHRP Project No. 1-40B, National Research Council, Transportation Research Board, Washington, D.C.
Witczak, M. W., Kaloush, K., Pellinen, T., El-Basyouny, M., and Von Quintus, H. (2002). “Simple performance test for superpave mix design.” NCHRP Rep. No. 465, National Research Council, National Academy Press, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: May 4, 2006
Accepted: Mar 5, 2007
Published online: Nov 1, 2007
Published in print: Nov 2007
Notes
Note. Associate Editor: Mary Stroup-Gardiner
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.