Tension Stiffening Model for Concrete Beams Reinforced with Steel and FRP Bars
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Materials in Civil Engineering
Volume 18, Issue 6
Abstract
Cracking is an important aspect of concrete behavior that considerably affects the overall response of concrete structures. The initiation of cracks is governed by concrete tensile properties. The propagation of cracks is a complicated phenomenon that plays a significant role in the nonlinear analysis of concrete structures. The cracking process in tension starts at a relatively low tensile strain, causing plain concrete to exhibit a gradual softening behavior. This softening is augmented by the tension stiffening of reinforcing bars. The smeared crack approach is typically combined with nonlinear finite-element analysis to generate an accurate global response. The key to such representative accurate predictions relates to material parameters, especially those of tension stiffening effects. For a complete understanding of the crack development process, tests should be performed on concrete specimens at various load histories. However, due to the difficulty of testing concrete in uniaxial tension, only limited and often conflicting results are available. The present work develops an inverse approach combining nonlinear numerical analysis and global experimental response to develop the tension stiffening model parameters needed to simulate homogenized concrete behavior in tension. The results of the study provide good model parameters to use in the case of concrete beams reinforced with steel and fiber-reinforced polymer (FRP) bars.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported in part by the Department of Civil Engineering at Kansas State University. The second writer would like to acknowledge a useful discussion with Mr. Abdul Salam Issa on the sectional analysis section of the paper.
References
Almusallam, T. (1997). “Analytical prediction of flexure behavior of concrete beams reinforced by FRP bars.” J. Compos. Mater., 31(7), 640–657.
Arduini, M., Tommaso, A., and Nanni, A. (1997). “Brittle failure in FRP plate and sheet bonded beams.” ACI Struct. J., 94(4), 363–370.
Bazant, Z. P., and Oh, B. H. (1983). “Crack band theory for fracture of concrete.” Materials & Structures; Research & Testing, 16(93), 155–177.
Benmokrane, B., Chaallal, O., and Masmoudi, R. (1996). “Flexural response of concrete beams reinforced with FRP reinforcing bars.” ACI Struct. J., 91(2), 46–55.
Bischoff, P. H., and Paixao, R. (2004). “Tension stiffening and cracking of concrete reinforced with glass fiber reinforced polymer (GFRP) bars.” Can. J. Civ. Eng., 31, 579–588.
Blais, C., and Picard, A. (1994). “Flexural stiffening of reinforced concrete beams with composite plates.” Proc., Developments in Short and Medium Span Bridge Engineering, Canadian Society for Civil Engineering, Montreal, 919–929.
El-Tawil, S., Ogune, C., Okeil, A., and Shahawy, M. (2001). “Static and fatigue analyses of RC beams strengthened with CFRP laminates.” J. Compos. Constr., 5(4), 258–267.
Focacci, F., Nanni, A., and Bakis, C. (2000). “Local bond-slip relationship for FRP reinforcement in concrete.” J. Compos. Constr., 4(1), 24–31.
Gilbert, R., and Warner, R. (1978). “Tension stiffening in reinforced concrete slabs.” J. Struct. Div., 104(12), 1885–1900.
Gopalaratnam, V. S., and Shah, S. P. (1985). “Softening response of plain concrete in direct tension.” ACI J., 82(3), 310–323.
Goto, Y. (1971). “Cracks formed in concrete around deformed tension bars.” ACI J., 68(4), 244–251.
Hillerborg, A., Modeer, M., and Peterson, P. E. (1976). “Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements.” Cem. Concr. Res., 6(6), 773–782.
Kaklauskas, G., and Ghaboussi, J. (2001). “Stress-strain relations for cracked tensile concrete from RC beam tests.” J. Struct. Eng., 127(1), 64–73.
Lin, C. S., and Scordelis, A. C. (1975). “Nonlinear analysis of RC shells of general form.” J. Struct. Div., 101(3), 523–538.
Nanni, A., Okamoto, T., Tanigaki, M., and Henneke, M. (1992). “Hybrid reinforcement for concrete structures.” Proc., Materials: Performance and Prevention of Deficiencies and Failures, ASCE, New York, 655–665.
Nayal, R. (2003). “Response prediction of FRP reinforced concrete beams including tension stiffening effects.” MS thesis, Kansas State University, Manhattan, Kan.
Pecce, M., Manfredi, G., and Cosenza, E. (2000). “Experimental response and code models of GFRP RC beams in bending.” J. Compos. Constr., 4(4), 82–190.
Reinhardt, H. W., Cornelissen, H. A., and Hordijk, D. A. (1986). “Tensile tests and failure analysis of concrete.” J. Struct. Eng., 112(11), 2462–2477.
Ritchie, P., Thomas, D., Lu, L., and Connelly, G. (1991). “External reinforcement of concrete beams using fiber reinforced plastics.” ACI Struct. J., 88(4), 490–500.
Sato, Y., and Vicchio, F. J. (2003). “Tension stiffening and crack formation in reinforced concrete members with fiber-reinforced polymer sheets.” J. Struct. Eng., 129(6), 717–724.
Scanlon, A., and Murray, D. W. (1974). “Time dependent deflections of reinforced concrete slab deflections.” J. Struct. Div., 100(9), 1911–1924.
Spadea, G., Bencardino, F., and Swamy, R. N. (1998). “Structural behavior of composite RC beams with externally bonded CFRP.” J. Compos. Constr., 2(3), 132–137.
Theriault, M., and Benmokrane, B. (1998). “Effects of FRP reinforcement ratio and concrete strength on flexural behavior of concrete beams.” J. Compos. Constr., 2(1), 7–16.
Vebo, A., and Ghali, A. (1977). “Moment curvature relation of reinforced concrete slabs.” J. Struct. Div., 103(3), 515–531.
Yankelevsky, D. Z., and Reinhardt, H. W. (1987). “Response of plain concrete to cyclic tension.” ACI Mater. J., 84(5), 365–373.
Yankelevsky, D. Z., and Reinhardt, H. W. (1989). “Uniaxial behavior of concrete in cyclic tension.” J. Struct. Eng., 115(1), 166–182.
Yost, J. R., Gross, S. P., and Dinehart, D. W. (2003). “Flexural stiffness of high strength concrete beams reinforced with GFRP bars.” ACI SP210: Deflection control for the future, J. N. Gardner, ed., American Concrete Institute, Farmington Hills, Mich., 209–224.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jan 20, 2004
Accepted: May 24, 2005
Published online: Dec 1, 2006
Published in print: Dec 2006
Notes
Note. Associate Editor: Houssam A. Toutanji
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.