Impact of Specimen Geometry on Dynamic Modulus Measurement Test Setup
Publication: Journal of Materials in Civil Engineering
Volume 18, Issue 4
Abstract
A new mechanistic-empirical pavement design guide to better predict the service life of pavement systems is in its final stages of validation. One of the new input parameters recommended for the design is the dynamic modulus of the asphalt concrete mixes. The developers of the design guide have developed a laboratory test setup that can provide this parameter. To verify the accuracy and precision of the proposed test setup, several synthetic specimens with known material properties and different length-to-diameter ratios were procured and tested. Since the new design guide advocates the use of specimens with length-to-diameter ratios of less than two, the utility of using end friction reducing layers between the specimen and the end platens were also evaluated. In the end, the hot mix asphalt concrete specimens were also prepared and tested. Overall, the test setup is precise and can be used for dynamic modulus measurement of asphalt concrete mixes. The results also suggest that the specimen geometry and the end friction reducing layers affect the accuracy and precision of estimated dynamic modulus.
Get full access to this article
View all available purchase options and get full access to this article.
References
Avelar, I., and Tandon, V. (2002). “Superpave practices: Adoption, issues and benefits.” Rep. DTFH-02-104-1F, Center for Infrastructure Systems, Univ. of Texas at El Paso, El Paso, Tex.
Bai, X. (2004). “Assessment of relationship between complex and seismic moduli of asphalt concrete mixtures.” MS thesis, Dept. of Civil Engineering, Univ. of Texas at El Paso, El Paso, Tex.
Bonaquist, R., Christensen, D. W., and Stump, W. (2003). “Simple performance tests for superpave mix design: First article development and evaluation.” NCHRP Rep. 513, Transportation Research Board, Washington, D.C.
Dougan, C. E., Stephens, J. E., Mahoney, J., and Hansen, G. (2003). “ -dynamic modulus: Test protocol—Problems and solutions.” Rep. CT-SPR-0003084-F03-3, Federal Highway Administration, McLean, Va.
Nazarian, S., Pezo, R. F., and Picornell, M. (1996). “Testing methodology for resilient modulus of base materials.” Transportation Research Record. 1547, Transportation Research Board, National Research Council, Washington, D.C., 46.
Pellinen, T. K. (2001). “Investigation of the use of dynamic modulus as an indicator of hot-mix asphalt performance.” Ph.D. dissertation, Arizona State University.
Pellinen, T. K., and Witczak, M. W. (2002). “Stress dependent master curve construction for dynamic (complex) modulus.” J. Association of Asphalt Paving Technologists, 17, 281–303.
Walpole, R. E., Myers, R. H., Myers, S. L., and Ye, K. (2003). Probability and statistics for engineers and scientists, Prentice-Hall, Upper Saddle River, N.J., 519–535.
Witczak, M. W., Bonaquist, R., Von Quintus, H., and Kaloush, K. (2000). “Specimen geometry and aggregate size effects in uniaxial compression and constant height shear tests.” J. Association of Asphalt Paving Technologists, 69, 733–793.
Witczak, M. W., Kaloush, K., Pellinen, T., El-Basyouny, M., and Von Quintus, H. (2002). “Simple performance test for superpave mix design.” NCHRP Rep. 465, Transportation Research Board, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Jun 11, 2004
Accepted: Sep 30, 2005
Published online: Aug 1, 2006
Published in print: Aug 2006
Notes
Note. Associate Editor: John S. Popovics
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.