Microstructure and Compactive Instabilities of a Stabilized Residue
Publication: Journal of Materials in Civil Engineering
Volume 18, Issue 2
Abstract
Cement stabilization of metallurgical residues is a frequently implemented option to reduce the associated environmental risks and thus simplify residue disposal procedures. As chemical stabilization is the first and main purpose of the process, physical testing of these stabilized residues is usually kept simple with unconfined compressive strength, permeability, and durability as the most frequently employed control tests. These tests are, however, unable to deliver a true image of the potentially complex mechanical behavior after stabilization of some important residues. One example is treated sludge. Stabilizing agents and fine residues are usually mixed at high water contents, resulting in a very porous microstructure, with fragile bonds. Under loading, rapid destructuration and compaction is possible and this process may be prone to material instabilities. These phenomena are experimentally and theoretically illustrated herein. The experimental illustrations are brought from a microstructural study and undrained triaxial campaign on a stabilized jarosite. The theoretical explanations are obtained from an elasto-plastic model previously employed for soft rocks.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Work by the first writer was partly supported by an EU Grant within the project Degradation and Instabilities in Geomaterials (DIGA Project—Improving Human Potential Program—Research Training Network Grant No. UNSPECIFIEDHPRN-CT-2002-00220). Vane test results are due to Marcelo Devincenzi. Model simulations were performed with help from Riccardo Castellanza.
References
Ackerley, S. K., Hellings, J. E., and Jardine, R. J. (1987). “Discussion on a new device for measuring local axial strains on triaxial specimens.” Geotechnique, 37(3), 413–417.
Arroyo, M., Castellanza, R., and Nova, R. (2005). “Oedometric testing and compaction bands in cemented soils.” Soils Found., 45(2), 181–195.
Bésuelle, P., Desrues, J., and Raynaud, S. (2000). “Experimental characterisation of the localisation phenomenon inside a Vosges sandstone in a triaxial cell.” Int. J. Rock Mech. Min. Sci., 37(8), 1223–1237.
Biscontin, G., and Pestana, J. M. (2001). “Influence of peripheral velocity on vane shear strength of an artificial clay.” Geotech. Test. J., 24(4), 423–429.
Butterfield, R. (1979). “A natural compression law for soils.” Geotechnique, 29, 469–480.
Castellanza, R. (2002). “Weathering effects on the mechanical behaviour of bonded geomaterials: An experimental, theoretical and numerical study.” Ph.D. thesis, Politecnico di Milano, Milan, Italy.
Chen, T. T., and Dutrizac, J. E. (1996). “Mineralogical study of Jarofix products for the stabilization of zinc industry jarosite residues.” Proc., 2nd. Int. Symp. Extraction and Processing for the Treatment and Minimization of Wastes, V. Ramachandran and C. C. Nesbitt, eds., TMS, Warrendale, Pa., 659–672.
Gens, A., Guimaraes, L. D., Garcia-Molina, A., and Alonso, E. E. (2002). “Factors controlling rock-clay buffer interaction in a radioactive waste repository.” Eng. Geol. (Amsterdam), 64(2–3), 297–308.
Gens, A., and Nova, R. (1993). “Conceptual bases for a constitutive model for bonded soils and weak rocks.” Proc., Geotechnical Engineering Hard Soils–Soft Rocks, Athens, Sept. 1993, A. Anagnostopoulos, F. Schlosser, N. Kalteziotis, and R. Frank, eds., Balkema, Rotterdam, The Netherlands, 485–494.
Glasser, F. P. (1997). “Fundamental aspects of cement solidification and stabilisation.” J. Hazard. Mater., 52, 151–170.
Imposimato, S., and Nova, R. (1998). “An investigation on the uniqueness of the incremental response of elastoplastic models for virgin sand.” Mech. Cohesive-Frict. Mater., 3, 65–87.
Ismail, M. A., Joer, H. A., Sim, W. H., and Randolph, M. F. (2002). “Effect of cement type on shear behavior of cemented calcareous soil.” J. Geotech. Geoenviron. Eng., 128(6), 520–529.
Kamon, M., Boutouil, M., Jeoung, J., and Inui, T. (2003). “Microstructure and leaching characteristics of sludge treated with low alkalinity additives.” Soils Found., 43(2), 105–114.
Kavvadas, M., Anagnostopoulos, A., and Kalteziotis, N. (1993). “A framework for the mechanical behaviour of cemented Corinth marl.” Proc., Int. Symp. on Geotechnical Engineering of Hard Soils–Soft Rocks, Athens, Sept. 1993, A. Anagnostopoulos, F. Schlosser, N. Kalteziotis, and R. Frank, eds., Balkema, Rotterdam, The Netherlands, 577–583.
Lagioia, R., and Nova, R. (1995). “An experimental and theoretical study of the behaviour of a calcarenite in triaxial compression.” Geotechnique, 45(4), 633–648.
Leroueil, S., and Vaughan, P. R. (1990). “The general and congruent effects of structure in natural soils and weak rocks.” Geotechnique, 40(3), 467–488.
Locat, J., Tremblay, H., and Leroueil, S. (1996). “Mechanical and hydraulic behaviour of a soft inorganic clay treated with lime.” Can. Geotech. J., 33, 654–669.
Mulligan, C. N., Yong, R. N., and Gibbs, B. F. (2001). “Remediation technologies for metal contaminated soils and groundwater: An evaluation.” Eng. Geol., 60, 193–207.
Nova, R. (1986). “Soil models as a basis for modelling the behaviour of geophysical materials.” Acta Mech., 64, 31–44.
Nova, R. (1992). “Mathematical modelling of natural and engineered geomaterials.” Eur. J. Mech. A/Solids, 11, 135–154.
Nova, R., Castellanza, R., and Tamagnini, C. (2003). “A constitutive model for bonded geomaterials subject to mechanical and/or chemical degradation.” Int. J. Numer. Analyt. Meth. Geomech., 27(9), 705–732.
Nova, R., and Wood, D. M. (1979). “A constitutive model for sand in triaxial compression.” Int. J. Numer. Analyt. Meth. Geomech., 3(3), 255–278.
Olsson, W. A., Holcomb, D. J., and Rudnicki, J. W. (2002). “Compaction localization in porous sandstone: Implications for reservoir mechanics.” Oil Gas Sci. Technol., 57(5), 591–599.
Porbaha, A. (1998). “State of the art in deep mixing technology: Part I. Basic concepts and overview.” Ground Improvement, 2, 81–92.
Rouainia, M., and Wood, D. M. (2000). “A kinematic hardening constitutive model for natural clays with loss of structure.” Geotechnique, 50(2), 153–164.
Schofield, A. N., and Wroth, C. P. (1968). Critical state soil mechanics, McGraw-Hill, London.
SETRA-LCPC. (2000). Traitement des sols à la chaux et/ou aux liants hydrauliques, MELT, Paris (in French).
Seyer, S., Chen, T. T., and Dutrizac, J. E. (2001). “Jarofix: Addressing iron disposal in the zinc industry.” JOM, 53(12), 32–35.
Shao, J. F., and Henry, J. P. (1991). “Development of elastoplastic model for rocks.” Int. J. Plast., 7(1), 1–13.
Stegemann, J. A., Caldwell, R. J., and Shi, C. (1997). “Variability of field solidified waste.” J. Hazard. Mater., 52, 335–348.
Uddin, M. K., and Buensuceso, B. R. (2002). “Lime treated clay: Salient engineering properties and a conceptual model.” Soils Found., 42(5),79–91.
Wood, D. M. (1990). Soil behaviour and critical state soil mechanics, Cambridge University Press, Cambridge, U.K.
Zheng, G. H., and Kozinski, J. A. (1996). “Solid waste remediation in the metallurgical industry: Application and environmental impact.” Environ. Prog., 15(4), 283–292.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Feb 15, 2005
Accepted: Jul 29, 2005
Published online: Apr 1, 2006
Published in print: Apr 2006
Notes
Note. Associate Editor: Hilary I. Inyang
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.