Site-Specific Study on Stabilization of Acid-Generating Mine Tailings Using Coal Fly Ash
Publication: Journal of Materials in Civil Engineering
Volume 18, Issue 2
Abstract
A site-specific study on stabilizing acid-generating mine tailings from Sudbury Mine using a coal fly ash from Nanticoke Generating Station is presented in this paper. The objective of the study is to evaluate the feasibility of codisposal of the fly ash and mine tailings to reduce environmental impacts of Sudbury tailings disposal sites. The study includes three phases, i.e., characterization of the mine tailings, and coal fly ash, oxidation tests on the mine tailings and kinetic column permeation tests. The results of the experiments indicate that when permeated with acid mine drainage, the hydraulic conductivity of Nanticoke coal fly ash decreased more than three orders of magnitude (from to ), mainly due to chemical reactions between the ash solids and acid mine drainage. Furthermore, the hydraulic gradient required for acid mine drainage to break through the coal fly ash is increased up to ten times (from 17 to 150) as compared with that for water. The results also show that the leachate from coal fly ash neutralizes the acidic pore fluid of mine tailings. The concentrations of trace elements in effluents from all kinetic column permeation tests indicated that coplacement of coal fly ash with mine tailings has the benefit of immobilizing trace elements, especially heavy metals. All regulated element concentrations from effluent during testing are well below the leachate quality criteria set by the local regulatory authority.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
Funds for this research were provided by the Ontario Power Generation and the National Science and Engineering Research Council of Canada, under Research Grant No. NRCR2625A07. Their support is greatly appreciated. The writers also wish to acknowledge the in kind contributions of Falconbridge Sudbury Mines, Golder Associates Ltd., and AMEC Earth and Environmental Ltd.
References
Amaratunga, L. M. (1995). “Cold-bond agglomeration of reactive pyrrhotite tailings for backfill using low cost binders: Gypsum -hemihydrate and cement.” Minerals Eng., 8(12), 1455–1465.
Bayat, O. (1998). “Characterization of Turkish fly ashes.” Fuel, 77(9/10), 1059–1066.
Chan, H. T. (1990). “Coal ash—A resource material.” Ontario Hydro Research Division, Rep. No. 89-288-K, Toronto.
Dermatas, D., and Meng, X. G. (2003). “Utilization of fly ash for stabilization/solidification of heavy metal contaminated soils.” Eng. Geol. (Amsterdam) 70(3-4), 377–394.
Eaker, C. (1997). “The use of alkali-activated fly ash grouts for the remediation of AMD from underground mines.” Fuel Energy Abstr., 38(6), 405.
Gabr, M. A., Butler, C. S., and Bowders, J. J. (1996). “Development of fly ash–based low permeability flowable fill.” Proc., 3rd Int. Symp. on Environmental Geotechnology, San Diego, Vol. 1, 426–436.
Holmström, H., Ljungberg, J., and Öhlander, B. (1999). “Role of carbonates in mitigation of metal release from mining waste: Evidence from humidity cells tests.” Environ. Geol., 37(4), 267–280.
Khanra, S., Mallick, D., Dutta, S. N., and Chauhuri, S. K. (1998). “Studies on the phase mineralogy and leaching characteristics of coal fly ash.” Water, Air, Soil Pollut., 107(1), 251–275.
Kusaka, E., Amano, N., and Nakahiro, Y. (1997). “Effect of hydrolysed aluminum(III) and chromium(III) cations on the lipophilicity of talc.” Int. J. Min. Process., 50(4), 243–253.
Ministry of the Environment (MOE). (2000). “Ministry of the Environment Regulation 558/00, Schedule 4.” Toronto.
Mohamed, A. M. O., Hossein, M., and Hassani, F. P. (2002). “Hydro-mechanical evaluation of stabilized mine tailings.” Environ. Geol., 41(7), 749–759.
Polat, M., Guler, E., Akar, G., Mordogan, H., Ipekoglu, U., and Cohen, H. (2002). “Neutralization of acid mine drainage by Turkish lignitic fly ashes; role of organic additives in the fixation of toxic elements.” J. Chem. Technol. Biotechnol., 77(3), 372–376.
Prashanth, J. P., Sivapullaiah, P. V., and Sridharan, A. (2001). “Pozzolanic fly ash as a hydraulic barrier in land fills.” Eng. Geol. (Amsterdam), 60(1-4), 245–252.
Qafoku, N. P., Kukier, U., Summer, M. E., Miller, W. P., and Radcliffe, D. E. (1999). “Arsenate displacement from fly ash in amended soils.” Water, Air, Soil Pollut., 114(1/2), 185–198.
Romano, C. G., Mayer, K. U., Jones, D. R., Ellerbroek, D. A., and Blowes, D. W. (2003). “Effectiveness of various cover scenarios on the rate of sulfide oxidation of mine tailings.” J. Hydrol., 271(1-4), 171–187.
Van den Berg, J. J., Cruywagen, L. De Necker, E., and Hodgson, F. D. I. (2001). “The suitability and impact of power station fly ash for water quality control in coal opencast mine rehabilitation.” Water Research Commission Rep. No. 745/1/01, Institute of Groundwater Studies, Univ. of the Orange Free State Bloemfontein.
Xenidis, A., Mylona, E., and Paspaliaris, I. (2002). “Potential use of lignite fly ash for the control of acid generation from sulphidic wastes.” Waste Manage., 22(6), 631–641.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Feb 11, 2005
Accepted: Jul 29, 2005
Published online: Apr 1, 2006
Published in print: Apr 2006
Notes
Note. Associate Editor: Hilary I. Inyang
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.