Class F Fly-Ash-Amended Soils as Highway Base Materials
Publication: Journal of Materials in Civil Engineering
Volume 17, Issue 6
Abstract
Class F fly ash cannot be used alone in soil stabilization applications as it is not self-cementing. An activator such as Portland cement or lime must be added to produce cementitious products often called pozzolan stabilized mixtures. The developed mixture must possess adequate strength and durability, should be easily compacted, and should be environmentally friendly. Roadways have a high potential for large volume use of the fly ash stabilized soils. The main objective of this study is to investigate the use of Class F fly ash amended soil–cement or soil–lime as base layers in highways. A battery of tests were performed on soil–fly ash mixtures prepared with cement and lime as activators. Unconfined compression, California bearing ratio, and resilient modulus tests were conducted. Finally, required base thicknesses were calculated using the laboratory-based strength parameters. Results of the study show that the strength of a mixture is highly dependent on the curing period, compactive energy, cement content, and water content at compaction. Lime treatment does not provide sufficient strength for designing the mixtures as highway bases. Freeze–thaw cycles do not have any detrimental effect on cement-treated mixtures. A power function in terms of bulk stress used for granular soils can accurately model the resilient moduli. Most of the factors considered have an impact on the thickness of the base layer.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The State Highway Administration of Maryland (MSHA) provided financial support for this research project through Grant No. UNSPECIFIEDSP007B4E. Mr. Mark Wolcott, Chief of the Geotechnical Division, provided significant input during the project. This support is gratefully acknowledged. Dr. Richard McCuen, Dr. Deborah Goodings, and Dr. Gregory B. Baecher of the University of Maryland are thanked for reviewing the first draft of this paper.
References
Acosta, H. A. (2002). “Stabilization of soft subgrade soils using fly ash.” MS thesis, Univ. of Wisconsin, Madison, Wis.
American Association of State Highway and Transportation Officials (AASHTO). (1993). Guide for design of pavement structures, Washington, D.C.
American Coal Ash Association (ACAA). (2003). 2001 coal combustion product production and use, Denver.
Arora, S. (2003). “Suitability of fly ash stabilized soils as highway base material.” MS thesis, Univ. of Maryland, College Park, Md.
Asphalt Institute. (2003). Thickness design—Highways and streets, Manual Series No. 1, Asphalt Institute, Lexington, Ky.
Baykal, G., and Metehan, T. (2002). “The effect of lime treatment on the shear strength parameters of the clay–concrete interface.” Proc., 81st Annual Meeting (CD ROM), Transportation Research Board, Washington, D.C.
Bergeson, K. L., and Barnes, A. G. (1998). “Iowa thickness design for low volume roads using reclaimed hydrated Class C fly ash bases.” ISUERI-Ames 98401, Iowa State Univ., Ames, Iowa.
Chen, D., Zaman, M., and Laguras, J. (1995). “Characterization of base/subbase materials under repetitive loading.” J. Test. Eval., 23(3), 180–188.
Cockrell, C. F., and Leonard, J. W. (1970). Characterization and utilization studies of limestone modified fly ash, Vol. 60, Coal Research Bureau, Morgantown, W.V.
Conner, J. R. (1990). Chemical fixation and solidification of hazardous wastes, Van Nostrand Reinhold, New York.
Consoli, N. C., Prietto, P. D. M., Carraro, J. A. H., and Heineck, K. S. (2001). “Behavior of compacted soil-fly ash–carbide lime mixtures.” J. Geotech. Geoenviron. Eng., 127(9), 774–782.
Huang, Y. H. (1993). Pavement analysis and design, Prentice Hall, Inc., Englewood Cliffs, N.J., 805
Kalankamary, G. P., and Donald, D. T. (1963). Development of freeze-thaw test for design of soil-cement, No. 36, Highway Research Board (HRB), 77–96.
Kleven, J. R., Edil, T. B., and Benson, C. H. (2000). “Evaluation of excess foundry system sands for use as subbase material.” Proc., 79th Annual Meeting (CD ROM), Transportation Research Board, Washington, D.C.
Little, D. N. (2000). “Evaluation of structural properties of lime stabilized soils and aggregates.” Mixture Design and Testing Protocol for Lime Stabilized Soils, Rep. Prepared for the National Lime Association, Vol. 3, p. 16.
Naik, T. R., Kraus, R. N., Siddique, R., and Ziemkiewicz, P. (2003). “Use of coal combustion products in permeable roadway base construction.” Proc., 15th Int. American Coal Ash Association Symp. on Management and Use of Coal Combustion Products (CCPs), Vol. 1, EPRI, Palo Alto, Calif., 1–19.
Nicholson, P., and Kashyap, V. (1993). “Fly ash stabilization of tropical Hawaiian soils.” Geotechnical Special Publication, No. 36, ASCE, New York, 15–29.
Othman, M. A., and Benson, C. H. (1993). “Effect of freeze–thaw on the hydraulic conductivity and morphology of compacted clay.” Can. Geotech. J., 30, 236–246.
Parsons, R. L., and Milburn, J. P. (2003). “Engineering behavior of stabilized soils.” Proc., 82nd Annual Meeting (CD ROM), Transportation Research Board, Washington, D.C.
Qubain, B. S., Seksisnky, E. J., and Li, J. (2000). “Incorporating subgrade lime stabilization into pavement design.” Proc., 79th Annual Meeting (CD ROM), Transportation Research Board, Washington, D.C.
Turner-Fairbanks Highway Research Center (TFHRC). (2002). “Coal fly ash user guideline—Stabilized base.” ⟨http://www.tfhrc.gov/hnr20/recycle/waste/cfa55.htm⟩
Vishwanathan, R., Saylak, D., and Estakhri, C. (1997). “Stabilization of subgrade soils using fly ash.” Proc., Ash Utilization Symp., Caer, Ky., 204–211.
Zaman, M. M., and Naji, K. N. (2003). “Effect of freeze–thaw cycles on class C fly ash stabilized aggregate base.” Proc., 82nd Annual Meeting (CD ROM), Transportation Research Board, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Nov 10, 2003
Accepted: Mar 17, 2005
Published online: Dec 1, 2005
Published in print: Dec 2005
Notes
Note. Associate Editor: Shin-Che Huang
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.