Unified Method to Quantify Aggregate Shape Angularity and Texture Using Fourier Analysis
Publication: Journal of Materials in Civil Engineering
Volume 17, Issue 5
Abstract
Aggregates are an important constituent of asphalt concrete, hydraulic cement concrete, and granular base. The shape, angularity, and surface texture of aggregates are basically variations of asperities at different dimensional scales and affect mixture properties in different ways. This paper presents a unified Fourier morphological analysis method to quantify the shape, angularity, and surface texture of aggregates. Evaluation of these characteristics of 10 aggregates of known quality indicates that Fourier morphological analysis quantitatively ranks these aggregates in consistence with qualitative evaluations.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
Funding provided by the Louisiana Transportation Research Center is sincerely acknowledged.
References
Brandon, D., and Kaplan, W. D. (1999). Microstructural characterization of materials, Wiley, New York.
Brzezicki, J. M., and Kasperkiewicz, J. (1999). “Automatic image analysis in evaluation of aggregate shape.” J. Comput. Civ. Eng., 13(2), 123–128.
Fletcher, T., Chan, D., Masad, E., and Sivakumar, K. (2002). Measurements of aggregate texture and its influence on HMA performance (CD-ROM), Transportation Research Board, Washington, D.C.
Kim, H. K., Haas, C. T., Rauch, A. F., and Browne, C. (2002). Wavelet-based 3D descriptors of aggregate particles (CD-ROM), Transportation Research Board, Washington, D.C.
Kuo, C. Y., and Freeman, R. B. (2000). “Imaging indices for quantification of shape, angularity, and surface texture of aggregates.” Transportation Research Record. 1721, Transportation Research Board, Washington, D.C., 57–65.
Kuo, C.-Y., Frost, J. D., Lai, J. S., and Wang, L. B. (1996). “Three-dimensional image analysis of aggregate particles from orthogonal projections.” Transportation Research Record. 1526, Transportation Research Board, Washington, D.C., 98–103.
Li, L., Chan, P. D., Zollinger, G., and Lytton, R. L. (1993). “Quantitative analysis of aggregate shape based on fractals.” ACI Mater. J., 90(4), 357–365.
Maera, N. H., and Zhou, W. (1999). “Flat and elongated: Advances using digital image analysis.” Proc., 7th Annual Symp., Int. Center for Aggregate Research, Univ. of Texas, Austin, Tex.
Masad, E., and Button, J. (2000). “Unified imaging approach for measuring aggregate angularity and texture.” Comput. Aided Civ. Infrastruct. Eng., 15(4), 273–280.
Masad, E., Button, J. W., and Papaginannakis, T. (2000). “Fine aggregate angularity: Automated image analysis approach.” Transportation Research Record. 1721, Transportation Research Board, Washington, D.C., 66–72.
Masad, E., Olcott, D., White, T., and Tashman, L. (2001). “Correlation of fine aggregate imaging shape indices with asphalt mixture performance.” Transportation Research Record. 1757, Transportation Research Board, Washington, D.C., 148–156.
Mohammad, L. M., Wu, Z., Wang, L. B., and Abadie, C. (2002). “A rut susceptibility study of superpave asphalt mixtures.” Int. J. Pavement Eng., 1(2), 23–35.
Penumadu, D., and Wettimuny, R. (2002). Characterization of aggregate shape using Fourier analysis and digital imaging technique (CD-ROM), Transportation Research Board, Washington, D.C.
Rao, C., and Tutumluer, E. (2000). “Determination of volume of aggregates: New image analysis approach.” Transportation Research Record. 1721, Transportation Research Board, Washington, D.C., 73–80.
Wang, L. B., and Lai, J. S. (1998). “Quantifying surface area of aggregates using an imaging technique.” 77th Ann. Meeting of Transportation Research Board, Washington, D.C.
Wang, L. B., and Mohammad, L. (2002). “Tomography imaging and computational technology for the characterization of asphalt concrete.”Phase I Rep. #01-01B, Louisiana Transportation Research Center.
Wang, L. B., Frost, J. D., and Mohammad, L. (2002). Three-dimensional aggregate evaluation using X-ray tomography imaging (CD-ROM), Transportation Research Board, Washington, D.C.
Wang, L. B., Lai, J. S., and Frost, J. D. (1997). Fourier morphological descriptors of aggregate profiles, 2nd Int. Conf. on Image Technology Applications in Civil Engineering, 76–85.
Wilson, J. D., and Klotz, L. D. (1996). “Quantitative analysis of aggregate based on Hough transform.” Transportation Research Record. 1530, Transportation Research Board, Washington, D.C., 111–115.
Yudhbir, J., and Abedinzadeh, R. (1991). “Quantifying of particle shape and angularity using the image analyzer.” Geotech. Test. J., 14(3), 296–308.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Mar 5, 2004
Accepted: Nov 3, 2004
Published online: Oct 1, 2005
Published in print: Oct 2005
Notes
Note. Associate Editor: Antonio Nanni
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.