Application of Gray Relational Analysis to Evaluate HMA with Reclaimed Building Materials
Publication: Journal of Materials in Civil Engineering
Volume 17, Issue 4
Abstract
This study evaluates reclaimed building materials (RBM), including waste concrete, brick, and tile, used as aggregate for hot mix asphalt (HMA). The analysis method of gray relational analysis (GRA) is presented to determine the best performance of the varying proportions of RBM with igneous crush stone (ICS) on HMA mixtures. Four types of aggregates are used for the mixtures: (a) 100% ICS; (b) 100% RBM; (c) 50% coarse and fine RBM plus 50% coarse and fine ICS (50% RBM plus 50% ICS); and (d) coarse RBM plus fine ICS (C-RBM plus F-ICS). Two types of asphalt cement, AC-10 and AC-20, are used as a binder for the mixtures. Laboratory tests of permanent deformation, resilient modulus, and stripping were evaluated by analysis of variance (ANOVA) and GRA. On the basis of this study, the ANOVA of the permanent deformation test shows that the type of aggregate has a significant effect, no matter what test temperatures and binders are used. The ANOVA of the resilient modulus test shows that the types of binder and aggregate do not significantly affect at test temperatures of 25°C, but significantly affect the types of binder at 40°C. The GRA result indicates that the best performance is the C-RBM plus F-ICS mixtures. For the stripping test, all 4 mixture types satisfied the Agency’s requirements.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials (AASHTO). (1993). Guide for design of pavement structures, Washington, D.C.
American Society for Testing and Materials (ASTM). (1995). “Standard test method for indirect tension for resilient modulus of bituminous mixtures.” Rep. D4123, Vol. 04.03, West Conshohocken, Pa.
Buck, D. (1977). “Recycled concrete as a source of aggregate.” ACI Mater. J., 74, 212–219.
Deng, J. L. (1982). “Control preambles of gray systems.” Syst. Control Lett., Huazong Univ., Wuhan, China.
Deng, J. L. (1987). The essential methods of gray systems, Huazhong University Science and Technology Press, Wuhan, China.
Deng, J. L. (1989). “Introduction to gray system theory.” J. Gray Syst., 1(1), 1–24.
Hasen, T. C. (1992). “Recycling of demolished concrete and masonry.” Rep. of Technical Committee 37–DRC: Demolition and Reuse of Concrete, RILEM, Cachan Cedex, France.
Federal Highway Administration (FHWA). (1997). “User guidelines for waste and byproduct materials in pavement construction.” Rep. FHWA-RD-97-148, Turner-Fairbank Highway Research Center, Washington, D.C.
Ministry of the Interior. (2001). Ministry of the Interior Statistic Data Rep., Taipei, Taiwan.
Ministry of Transportation and Communications (MTC). (1989). Highway construction and maintenance manual, Taipei, Taiwan.
Mukai, T., Kikuchi, M., and Koizumi, H. (1978). Fundamental study on bond properties between recycled aggregate concrete and steel bar, Cement Assn. of Japan, Tokyo. Japan.
Nienelt, G., and Thamfald, H. (1988). “Evaluation of the resistance to deformation of different road structures and asphalt mixtures determined the pavement rutting tester.” Proc., Assn. of Asphalt Paving Technologists, 57, 320–345.
Petrarca, R. W., and Galdiero, V. A. (1984). “Summary of testing of recycled crushed concrete.” Transportation Research Record. 989, Transportation Research Board, Washington, D.C., 19–26.
Roberts, F. L., Kandahl, P. S., Brown, E. R., Lee, D.-Y., and Kennedy, T. W. (1991). Hot mix asphalt materials, mixture design, and construction, NAPA Education Foundation, Lanham, Md.
Senior, S. A., Szoke, S. I., and Rogers, C. A. (1994). “Ontario’s experience with reclaimed materials for used as aggregates.” Proc., Int. Road Federation Conf., Calgary, Canada.
Shen, D. H., and Kuo, M. F. (2001). “Gray relational analysis evaluating the properties of gap-aggregate gradation.” Proc., 2001 Conf. on Reports of Gray System Theory and Application, Part B, Taiwan, 47–56.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Jan 10, 2003
Accepted: May 11, 2004
Published online: Aug 1, 2005
Published in print: Aug 2005
Notes
Note. Associate Editor: Eyad Masad
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.