Flow Performance of High-Fluidity Concrete
Publication: Journal of Materials in Civil Engineering
Volume 16, Issue 6
Abstract
In this paper a particle assembly model was proposed for high fluidity concrete in the fresh state. This particle assembly is composed of cohesionless particles (aggregates grains) and cohesive particles (cement grains) surrounded by mixing water membranes. By using a microscopic approach and expanding Eyring’s rate process viscosity theory, the flow mechanism of high fluidity concrete having interfriction was clarified, and its flow curve was examined. Furthermore, the effects of normal stress and environmental temperature on the flow behavior of high fluidity concrete were investigated quantitatively. Finally, a shear test apparatus was developed and a series of shear tests were performed to verify the obtained theoretical results.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Banfill, P. F. G. (1990). “Use of the viscocorder to study the rheology of fresh mortar.” Mag. Concrete Res., 42(153), 213–221.
2.
Banfill, P. F. G. (1991). “The rheology of fresh mortar.” Mag. Concrete Res., 43(154), 13–21.
3.
Everett, D.H. (2000). Basic principles of colloid science, The Royal Society of Chemistry, Kyoto, Japan, 23–27.
4.
Fukaya, T. (1992). “The flowing behavior of fresh cement and concrete.” Cement Concrete, Japan Cement Association, 540, 30–39.
5.
Goto, K. (1963). Rheology and application, Kyoritsu Publishing House, Tokyo, 49–51.
25.
Hu, C., and Larrard, F. D. (1996). “The rheology of fresh high-performance concrete.” Cem. Concr. Res., 26(2), 283–294.
6.
Japan Rheology Society (1992). Course of rheology, Polymer Science Publishing Co. Ltd, Tokyo, 151–157.
7.
Li, Z.G. (2001). “A study on the dependence of yield stress of high fluidity concrete on loading conditions.” Proc., 3rd Int. Conf. on Concrete under Severe Condition of Environment and Loading, Vancouver, Canada, 1376–1383.
8.
Li, Z. G., Tanigawa, Y., and Mori, H. (2002). “Theoretical analysis on time-dependence of fluidity and thixotropy of high fluidity concrete.” J. Struct. Constr. Eng., 542, 47–53 (in Japanese).
9.
Li, Z. G., Tanigawa, Y., Mori, H., and Kurokawa, Y. (1999). “Study on constitutive law of fresh mortar using particle assembly model.” J. Struct. Constr. Eng., Architecture Institute of Japan, 523, 17–24.
10.
Li, Z. G., Tanigawa, Y., Mori, H., and Ohkubo, T. (2001). “Study on limit stress at shear failure of fresh mortar by microscopic approach.” J. Struct. Constr. Eng., 542, 47–53.
11.
Mori, H. (1998). “High fluidity concrete.” J. Architecture Building Sci., Architecture Institute of Japan, 113, (1420), 41–43.
12.
Mori, H., Tanaka, M., and Tanigawa, Y. (1991). “Experimental study on the shear deformational behavior of fresh concrete.” J. Struct. Constr. Eng., 421, 1–10.
13.
Murayama, T. (1991). Theory of mechanical behavior of soil, Gihodoshuppan Co. Ltd., Kyoto, Japan, 27–79.
14.
Nakae, K. (2001). Rheology science and application technology, Fuji-tech System Co. Ltd., Tokyo, 108–181.
15.
Onogi, S. (2000). Rheology used for specialist in chemical field, The Royal Society of Chemistry, Kyoto, Japan, 13–19.
16.
Papo, A. (1988). “The thixotropic behavior of white portland cement pastes.” Cem. Concr. Res., 18(4), 595–603.
17.
Sakai, E., and Dimon, M. (1996). “The dispersion mechanisms of AE high range water reducing agent.” Cement Concrete, 595, 13–22.
18.
Shimada, K., Fujii, H., and Nishimura, S. (1993). “Increase of shear strength due to surface tension and suction of pore water in granular material.” Proc., Symp. on Mechanical Behaviors of Granular Material, Japan, 17–20.
19.
Struble, L. J., and Schultz, M. A. (1993). “Using creep and recovery to study flow behavior of fresh cement paste.” Cem. Concr. Res., 23(6), 1369–1379.
20.
Tanigawa, Y., and Mori, H. (1988). “Toward the development of workability design of fresh concrete.” Cement Concrete, 501, 11–20.
21.
Tattersall, G.H., and Banfill, P.F. G. (1983). “The rheology of fresh concrete.” Pitman Advanced Publishing Program, 330–360.
22.
Uchikawa, H., Hanehara, S., and Sawaki, O. (1997). “Effect of electrostatic and steric repulsive force of organic admixture on the dispersion of cement particles in fresh cement paste.” Cement Concrete, 602, 28–38.
23.
Wallevik, O. H., and Gjørv, O. E. (1990). “Modification of the two-point workability apparatus.” Mag. Concrete Res., 42(152), 135–142.
24.
Yamamoto, Y., Homma, A., and Kitsutaka, Y. (1996). “Study on the testing method of the rheological characteristic of high fluidity concrete.” J. Struct. Construction Eng., Architecture Institute of Japan, 489, 9–16.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 ASCE.
History
Published online: Nov 15, 2004
Published in print: Dec 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.