Discrete Element Modeling to Predict the Modulus of Asphalt Concrete Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 16, Issue 2
Abstract
The microfabric discrete element modeling (MDEM) approach is used herein to predict the asphalt mixture complex modulus in extension/compression across a range of test temperatures and load frequencies. The method allows various constitutive models to be employed to describe particle and interface properties, such as normal and shear stiffness and strength. An uncalibrated two-dimensional (2-D) model was developed, and complex modulus predictions were compared to theoretical bounds on moduli. As expected, the uncalibrated 2-D model underestimates the significant stiffening effects of the coarse aggregate skeletal structure and predictions are found to be near the lower theoretical bounds, well below experimentally determined moduli. A technique was developed to calibrate the MDEM model to experimental results by dilating aggregates to create additional aggregate contact, which is believed to be more representative of the actual three-dimensional behavior. This method is shown to provide better modulus estimates across a range of test temperatures and load frequencies compared to more traditional calibration methods. As future modeling efforts are extended to three dimensions, the degree of model calibration required should be greatly reduced.
Get full access to this article
View all available purchase options and get full access to this article.
References
Buttlar, W. G., Bauer, J. M., and Sherman, D. S. (2002). “Dynamic modulus of asphalt concrete using a hollow cylinder tensile tester.” Journal of the Transportation Research Board, No. 1783, National Research Council, Washington, D.C., 191–200.
Buttlar, W. G., and Roque, R.(1996). “Evaluation of empirical and theoretical models to determine asphalt mixture stiffnesses at low temperatures.” J. Assoc. Asphalt Paving Technol., 65, 99–141.
Buttlar, W. G., and You, Z. (2001). “Discrete element modeling of asphalt concrete: A micro-fabric approach.” Journal of the Transportation Board, National Research Council, Washington, D.C., No. 1757, Geomaterials, 111–118.
Flügge, W. (1975). Viscoelasticity, 2nd Ed., Springer, Berlin, 46–70.
Hashin, Z.(1965). “Viscoelastic behaviour of heterogeneous media.” J. Appl. Mech., 32(9), 630–636.
Hashin, Z., and Shtrikman, S.(1963). “A variational approach to the theory of the elastic behaviour of multiphase materials.” J. Mech. Phys. Solids, 11, 137.
Itasca Consulting Group, Inc. (2002). PFC 2D Ver. 3.0, Minneapolis.
Kose, S., Guler, M., Bahia, H. U., and Masad, E. (2000). “Distribution of strains within asphalt binders in HMA using imaging and finite element techniques.” Journal of the Transportation Research Board, No. 1728, National Research Council, Washington, D.C., 21–27.
Media Cybernetics, Inc. (2001). Image-Pro Plus Ver. 4.5 for Windows Reference Guide, Silver Spring, Md.
You, Z., and Buttlar, W. G. (2002). “Stiffness prediction of hot mixture asphalt (HMA) based upon microfabric discrete element modeling (MDEM).” Proc., 4th Int. Conf. on road and airfield pavement technology, Vol. 1, People’s Communications, China, 409–417.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Oct 23, 2002
Accepted: Jun 23, 2003
Published online: Mar 15, 2004
Published in print: Apr 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.