Micromechanics-Based Analysis of Stiffness Anisotropy in Asphalt Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 14, Issue 5
Abstract
The mechanical behavior of many bound granular materials such as asphalt mixtures is anisotropic in nature. However, the majority of the current mechanical tests and analytical models for asphalt mixtures are based on the assumption of isotropic material properties. This study investigates the stiffness anisotropy of asphalt mixtures using micromechanics-based models. The models’ parameters are obtained by quantifying the internal structure anisotropy in terms of the preferred orientation of longest axes and contact normals of aggregates. Image analysis techniques are used to conduct the internal structure measurements. The orientations of the longest axes are found to be easier to measure, and better descriptors of anisotropy, than the contact normals. Finite-element analyses of the internal structure are also used to provide insight into the mixture stiffness anisotropy. The mixture properties are selected to represent a wide range of temperatures. The stiffness in the horizontal direction is shown to be as high as 30% more than the stiffness in the vertical direction. The stiffness anisotropy decreases with a decrease in the mixture temperature. The finite-element results are shown to have very good correlation with the results of the micromechanics model derived based on the orientation of the longest axes of aggregates.
Get full access to this article
View all available purchase options and get full access to this article.
References
ABAQUS finite element package Version 5.8. (1998). Karlsson and Sorrenson.
American Association of State Highway and Transportation Officials, (AASHTO). (1993). “Specifications for superpave volumetric mix design standard MP2–95.” AASHTO Provisional Standards, Washington, D.C.
Bathurst, R. J., and Rothenburg, L.(1990). “Observations on stress-force-fabric relationships in idealized granular materials.” Mech. Mater., 9, 65–80.
Biegler, M. W., and Mehrabadi, M. M.(1995). “An energy-based constitutive model for anisotropic solids subject to damage.” Int. J. Numer. Analyt. Meth. Geomech., 19, 151–164.
Chang, K. G., and Meegoda, J.(1997). “Micromechanical simulation of hot mix asphalt.” J. Eng. Mech., 123(5), 495–503.
Cheung, C. Y., Cocks, A. C. F., and Cebon, D.(1991). “Isolated contact model of an idealized asphalt mix.” Int. J. Mech. Sci., 41, 767–792.
Cowin, S. C.(1985). “The relationship between the elasticity tensor and the fabric tensor.” Mech. Mater., 4, 137–147.
Du, J., and Dusseault, M.(1994). “A generalized D matrix for anisotropic elastic granular media.” Int. J. Numer. Analyt. Meth. Geomech., 18, 107–120.
Heukelom, W., and Klomp, A. J. G. (1964). “Road design and dynamic loading.” Proc., Association of Asphalt Paving Technologists, Association of Asphalt Paving Technologists, St. Paul, Minn., 33.
Image-Pro Plus version 4. (1998). Media Cybernetics, Georgia, Md.
Kanatani, K.(1984). “Stereological determination of structural anisotropy.” Int. J. Eng. Sci., 22(5), 531–546.
Konishi, J., and Naruse, F. (1987). “A note on fabric in terms of voids.” Micromechanics of granular materials, M. Satake and J. T. Jenkins, eds., 39–46.
Kose, S., Guler, M., Bahia, H., and Masad, E.(2000). “Distribution of strains within binders in HMA using imaging and finite element techniques.” J. Transp. Res. Board, 1728, 21–27.
Lekhnitskii, S. G. (1981). Theory of elasticity of an anisotropic body, Mir Publishers, Moscow.
Masad, E., Muhunthan, B., Shashidhar, N., and Harman, T. (1998). “Aggregate orientation and segregation in asphalt concrete.” Proc., Application of Geotechnical Principles in Pavement Engineering, ASCE, Reston, Va., 69–80.
Masad, E., Muhunthan, B., Shashidhar, N., and Harman, T.(1999a). “Internal structure characterization of asphalt concrete using image analysis.” J. Comput. Civ. Eng., 13(2), 88–95.
Masad, E., Muhunthan, B., Shashidhar, N., and Harman, T. (1999b). “Effect of compaction procedure on the aggregate structure in asphalt concrete.” Transportation Research Record 1681, Transportation Research Board, Washington, D.C., 179–184.
Masad, E., Niranjanan, S., Bahia, H., and Kose, S.(2001). “Modeling and experimental measurements of localized strain distribution in asphalt mixes.” J. Transp. Eng., 127(6), 477–485.
Miura, K., Miura, S., and Toki, S.(1986). “Deformation behavior of anisotropic dense sand under principal stress axes rotation.” Soils Found., 26, 36–52.
Muhunthan, B., Chameau, J. L., and Masad, E.(1996). “Fabric effects on yield behavior of soils.” Soils Found., 36(3), 85–97.
Nemat-Nasser, S., and Mehrabadi, M. M. (1983). “Stress and fabric in granular mass.” Mechanics of granular materials: New models and constitutive relations, J. T. Jenkins and M. Satake, eds., Elsevier, New York, 1–8.
Oda, M., Nemat-Naaser, S., and Konish, J.(1985). “Stress-induced anisotropy in granular masses.” Soils Found., 25(3), 85–97.
Oda, M., and Nakayama, N.(1989). “Yield function for soil with anisotropic fabric.” J. Eng. Mech., 115(1), 89–104.
Rothenburg, L., Bogobowicz, A., Haas, R., Jung, F. W., and Kennepohl, G. (1992). “Micromechanical modelling of asphalt concrete in connection with pavement rutting problems.” Proc., 7th Int. Conf. on Asphalt Pavements, 230–245.
Tashman, L. (2000). “Internal structure analysis of asphalt mixes to improve the simulation of superpave gyratory compaction to field conditions.” MS thesis, Washington State Univ., Pullman, Wash.
Timoshenko, S., and Goodier, J. (1970). Theory of elasticity, 3rd Ed., McGraw-Hill, New York.
Tobita, Y.(1989). “Fabric tensors in constitutive equations for granular materials.” Soils Found., 29(4), 99–104.
Underwood, E. E. (1970). Quantitative stereology, Addison-Wesley, Reading, Mass.
Weissman, S. L., Harvey, J., Sackman, J., and Long, F. (1999). “Selection of laboratory test specimen dimension for permanent deformation of asphalt concrete pavements.” Transportation Research Record 1681, Transportation Research Board, Washington, D.C., 113–120.
Witczak, M. W., Bonquist, R., Von Quintus, H., and Kaloush, K. (2000). “Specimen geometry and aggregate size effects in uniaxial compression and constant height shear tests.” J. Assoc. Asphalt Paving Technol., 69.
Zhu, H., and Nodes, J. E.(2000). “Contact based analysis of asphalt pavement with the effect of aggregate angularity.” Mech. Mater., 32, 193–202.
Zysset, P. K., and Curnier, A.(1995). “An alternative model for anisotropic elasticity based on fabric tensors.” Mech. Mater., 21, 243–250.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Nov 10, 2000
Accepted: Aug 10, 2001
Published online: Sep 13, 2002
Published in print: Oct 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.