Tensile Strength and Toughness of Soil–Cement–Fly-Ash Composite Reinforced with Recycled High-Density Polyethylene Strips
Publication: Journal of Materials in Civil Engineering
Volume 14, Issue 2
Abstract
An experimental investigation was conducted to evaluate the split tensile load-deformation strength and toughness properties of a granular soil chemically stabilized with cement and fly ash, and mechanically reinforced with recycled plastic strips [high-density polyethylene (HDPE)] obtained from postconsumer milk or water containers. The primary objective of this research was to evaluate if a modest amount of reinforcing fibers derived from recycled plastics can enhance the mechanical performance of a lean cementitious composite by improving the split tensile strength and the postpeak load carrying capacity. As an extension to the ASTM C 496 procedures for split tensile tests, two lateral linear variable differential transformers were attached to measure the tensile deformation of the horizontal diameter due to loading in the orthogonal direction; this method permitted an evaluation of the fiber toughening action under split tension. Two major groups of mixes were used for the study. The first group was stabilized with only 2–5% cement, while the second group contained 10% cement (by weight); several specimens also contained an additional 2–10% ASTM class C fly ash. Fiber-reinforced specimens contained 0.25% (by weight) to 0.80% (by weight) of recycled HDPE. A dimensionless toughness index and a fiber factor were defined in order to quantify the improvement in strength and toughness characteristics. It was found that the inclusion of HDPE fibers does not meaningfully improve the tensile strength, but significantly enhances the overall toughness of the composite. Results indicate that the test procedure, and the toughness index and fiber factor proposed in this study can be utilized to evaluate the performance of a fiber-reinforced stabilized soil for geotechnical and pavement applications.
Get full access to this article
View all available purchase options and get full access to this article.
References
Balaguru, P. N., and Shah, S. P. (1992). Fiber reinforced cement composites, McGraw-Hill, New York.
Benson, C. H., and Khire, M. V.(1994). “Reinforcing sand with strips of reclaimed high-density polyethylene.” J. Geotech. Eng., 120(5), 838–855.
Craig, R., Schuring, J., Costello, W., and Soong, L. (1987). “Fiber reinforced soil-cement.” S. P. Shah and G. B. Batson, eds., SP105-7, American Concrete Institute, Detroit, 119–139.
Crockford, W. W., Grogan, W. P., and Chill, D. S. (1993a). “Strength and life of stabilized layers containing fibrillated polypropylene.” Transportation Research Record 1418, Transportation Research Board, Washington, D.C., 60–66.
Crockford, W. W., Zollinger, D. G., and Szecsy, R. S. (1993b). “Fracture tests on soil cement with fibers.” Final Rep. Prepared for Synthetic Industries, Texas Transportation Institute, Texas A&M Univ., College Station, Tex.
Kennedy, T. W., and Hudson, W. R. (1968). “Application of indirect tensile test to stabilized materials.” Highway Research Record 235, Highway Research Board, National Research Council, Washington, D.C., 36–48.
Maher, M. H., and Ho, Y. C.(1993). “Behavior of fiber-reinforced cemented sand under static and cyclic loads,” ASTM Geotechnical Testing J. 16, 330–338.
Maher, M. H., and Ho, Y. C.(1994). “Mechanical properties of kaolinite/fiber soil composite,” J. Geotech. Eng., 120(8), 1381–1393.
Nanni, A. (1989). “Properties and design of fiber reinforced roller compacted concrete.” Transportation Research Record 1226, Transportation Research Board, Washington, D.C., 61–68.
Rocco, C., Guinea, G. V., Planas, J., and Elices, M.(1999). “Mechanisms of rupture in splitting tests,” ACI Mater. J., 96(1), 52–60.
Smith, L. L., and Ramer, R. M. (1992). “Recycled plastics for highway agencies.” Transportation Research Record 1345, Transportation Research Board, Washington, D.C., 60–66.
Sobhan, K., and Krizek, R. J.(1996). “Fiber reinforced recycled crushed concrete as a stabilized base course for highway pavements,” Proc., 1st Int. Conf. on Composites in Infrastructure,996–1011.
Soroushian, P., Alhozaimy, A., and Eldarwish, A. I. (1993). “Recycling of plastics in concrete to enhance toughness characteristics and resistance to shrinkage cracking.” Symposium Proc., Recovery and Effective Reuse of Discarded Materials and By-Products for Construction of Highway Facilities, 41–53.
Thompson, M. R. (1994). “High-strength stabilized base thickness design procedure.” Transportation Research Record 1440, Transportation Research Board, Washington, D.C., 1–7.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: May 24, 2000
Accepted: Feb 15, 2001
Published online: Apr 1, 2002
Published in print: Apr 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.