Modeling of Concrete Cracking Induced by Steel Expansion
Publication: Journal of Materials in Civil Engineering
Volume 13, Issue 3
Abstract
When steel reinforcement corrodes in a concrete structure, the expansion of corrosion products often leads to cracking in the concrete. In this paper, a simple physical model is developed to relate the size of cracks to steel expansion. By assuming the steel/concrete interface to be perfectly smooth or perfectly bonded, upper- and lower-bound solutions can be obtained. The results indicate (1) the presence of an expansion threshold below which no crack propagation can occur; (2) a “pop-in” behavior occurring at a critical expansion that is strongly dependent on initial flaw size; and (3) the steel expansion to generate a given crack size is strongly affected by interfacial bonding. When the theoretical findings are compared to available experimental results, good agreement is obtained. Based on the theoretical results, several guidelines for controlling expansion-induced cracking can be proposed. These include proper control of initial flaw size, addition of fibers to produce an R-curve behavior, and the enhancement of bond and/or friction at the steel/concrete interface.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Andrade, C., Alonso, C., and Molina, F. J. ( 1993). “Cover cracking as a function of rebar corrosion: Part I—Experimental test.” Mat. and Struct., Paris, 26, 453–464.
2.
Bentur, A., and Jaegermann, C. (1991). “Effect of curing and composition on the properties of the outer skin of concrete.”J. Mat. in Civ. Engrg., ASCE, 3(4), 252–262.
3.
Browne, R. D. ( 1980). “Mechanisms of corrosion of steel in concrete in relation to design, inspection and repair of offshore and coastal structures.” Perf. of Concrete in Marine Envir., ACI Publ. SP-65, V. M. Malhotra, ed., American Concrete Institute, Detroit, 169– 204.
4.
Dela, B. F., and Stang, H. ( 2000). “Two-dimensional analysis of crack formation around aggregates in high-shrinkage cement paste.” Engrg. Fract. Mech., 65, 149–164.
5.
Dhir, R. K., and Byars, E. A. ( 1993). “PFA concrete: chloride diffusion rates.” Mag. Concrete Res., 45(1), 1–9.
6.
Dhir, R. K., Jones, M. R., and Ng, S. L. D. ( 1998). “Prediction of total chloride content profile and concentration/time-dependent diffusion coefficients for concrete.” Mag. Concrete Res., 50(1), 37–48.
7.
Dundurs, J., and Mura, T. ( 1964). “Interaction between an edge dislocation and a circular inclusion.” J. Mech. Phys. Solids, 12, 177–189.
8.
Erdogan, F., and Gupta, G. D. ( 1972). “On the numerical solution of singular integral equations.” Quarterly Appl. Math., 30, 525– 534.
9.
Hills, D. A., Kelly, P. A., Dai, D. N., and Korsunsky, A. M. ( 1996). Solutions of crack problems—the distributed dislocation technique, Kluwer Academic, Dordrecht, The Netherlands.
10.
Isida, M., and Noguchi, H. ( 1983). “Plane problems of arbitrarily located cracks in an infinite matrix containing a circular inclusion.” Trans. Japan Soc. Mech. Engrs., 49, 147–155 (in Japanese).
11.
Krenk, S. ( 1975). “On the use of the interpolation polynomial for solutions of singular integral equations.” Quarterly Appl. Math., 32, 479–484.
12.
Leung, C. K. Y. ( 1997). “Modeling of concrete cracking induced by steel corrosion.” Brittle Matrix Composites 5, A. M. Brandt, V. C. Li, and I. H. Marshall, eds., Woodhead, Cambridge, U.K., 340–349.
13.
Maage, M., Helland, S., Poulsen, E., Vennesland, O., and Carlsen, J. E. ( 1996). “Service life prediction of existing concrete structures exposed to marine environment.” ACI Mat. J., 93(6), 602–608.
14.
Molina, F. J., Alonso, C., and Andrade, C. ( 1993). “Cover cracking as a function of rebar corrosion: Part 2—Numerical method.” Mat. and Struct., Paris, 26, 532–548.
15.
Nagesh, M., and Bhattacharjee, B. ( 1998). “Modeling of chloride diffusion in concrete and determination of diffusion coefficients.” ACI Mat. J., 95(2), 113–120.
16.
Newman, J. C., Jr. ( 1971). “An improved method of collocation for the stress analysis of cracked plates with various shaped boundaries.” NASA TN D-6376, National Aeronautics and Space Administration, Washington, D.C., 1–45.
17.
Ohtsu, M., and Yoshimura, S. ( 1997). “Analysis of crack propagation and crack initiation due to corrosion of reinforcement.” Const. and Build. Mat., 11(7–8), 437–442.
18.
Padovan, J., and Jae, J. ( 1997). “FE modeling of expansive oxide induced fracture of rebar reinforced concrete.” Engrg. Fracture Mech., 56(6), 797–812.
19.
Page, C. L., Short, N. R., and El Tarros, A. ( 1981). “Diffusion of chloride ions in hardened cement pastes.” Cement and Concrete Res., 11, 395–406.
20.
Parrott, P. J. ( 1994). “Design for avoiding damage due to carbonation-induced corrosion.” Durability of Concrete, ACI SP-145, V. M. Malhotra, ed., American Concrete Institute, Detroit, 283–298.
21.
Rosenberg, A., Hanson, C. M., and Andrade, C. ( 1989). “Mechanisms of corrosion of steel in concrete.” Mat. Sci. of Concrete I, J. Skalny, ed., American Ceramic Society, Westerville, Ohio, 285–313.
22.
Stroeven, P., Dalhuisen, D. H., and Moczko, A. T. ( 1995). “Experimental simulation of bar corrosion and implementations for concrete durability.” Concrete under severe conditions: Environmental and loading, Vol. 1, K. Sakai, N. Banthia, and O. E. Gjorv, eds., E&FN Spon, London, 554–563.
23.
Timoshenko, S. P., and Goodier, J. N. ( 1970). Theory of elasticity, McGraw Hill, New York.
24.
Tuutti, K. ( 1982). Corrosion of steel in concrete, Swedish Cement and Concrete Research Institute, Stockholm.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 13 • Issue 3 • June 2001
Pages: 169 - 175
History
Received: Apr 26, 1999
Published online: Jun 1, 2001
Published in print: Jun 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.