Hydrothermal Solidification of Wastes withFormation of Zeolites
Publication: Journal of Materials in Civil Engineering
Volume 12, Issue 4
Abstract
In order to use waste materials effectively, a possibility of simultaneous solidification of inorganic waste materials and fixation of alkaline ions and heavy metal through formation of zeolite by using hydrothermal processing, was investigated. Fly ash, cinder of sewage sludge, and cinder of rubbish were used as the starting materials. Ca/Si and 2Na/Si molar ratios of the specimens were changed by the addition of CaO and Na2CO3. These mixtures were formed and hydrothermally processed at 200°C. Various zeolites, such as analcime, Linde B1 zeolite, cancrinite, zeolite P-C, and hauyne, were formed at Ca/Si = 0.3 or 0.5 and 2Na/Si = 0.1–1.0. In the case of the fly ash system, although only the zeolite minerals were formed, the flexural strength reached up to 17 MPa when Ca/Si = 0.3 and 2Na/Si = 0.1, and the fixing ratio of Na+ ion reached a maximum value of 85% by the formation of zeolites. When cinder of rubbish was used, dissolution of heavy metals from the solidified specimen was scarcely observed. The microstructure and the variation of pore size distribution were also discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Barrer, R. M., and Baynham, J. W. ( 1956). “Hydrothermal chemistry of the silicates. VII. Synthetic potassium aluminosilicates.” J. Chem. Soc., London, 2882–2892.
2.
Barrer, R. M., Baynham, J. W., Bultitude, F. W., and Meier, W. M. ( 1959). “Hydrothermal chemistry of the silicates. VIII. Low-temperature crystal growth of aluminosilicates.” J. Chem. Soc., London, 195–208.
3.
Barrer, R. M., and Denny, P. J. ( 1961). “Hydrothermal chemistry of the silicates. X. A partial study of the field CaO-Al2O3-SiO2-H2O.” J. Chem. Soc., London, 983–1000.
4.
Barrer, R. M., and White, E. A. D. ( 1952). “Hydrothermal chemistry of silicates. II. Synthetic crystalline sodium aluminosilicates.” J. Chem. Soc., London, 1561–1571.
5.
Bonaccorsi, E., Merlino, S., and Pasero, M. ( 1990). “Davyne: its structural relationships with cancrinite and vishnevite.” Neues Jahrb. Mineral. Monatsh, Stuttgart, Germany, 1990(3), 97–112.
6.
Buhl, J. C. ( 1991). “Synthesis and characterization of the basic and non-basic members of the cancrinite-natrodavyne family.” Thermochim. Acta., Amsterdam, The Netherlands, 178, 19–31.
7.
Colella, C., and de'Gennaro, M. ( 1989). “Cancrinite crystallization from alkaline aluminosilicate systems containing large and small cations.” Am. Chem. Soc. Symp. Ser., 398, 196–208.
8.
Hassan, I., and Buseck, P. R. ( 1992). “The origin of the superstructure and modulations in cancrinite.” Canadian Mineralogist, Ottawa, 30(1), 49–59.
9.
Hassan, I., and Grundy, H. D. ( 1984). “The character of the cancrinite-vishnevite solid-solution series.” Canadian Mineralogist, Ottawa, 22(2), 333–340.
10.
Komarneni, S., and Tsuji, M. ( 1989). “Selective cation exchange in substituted tobermorite.” J. Am. Ceram. Soc., 72(9), 1668–1674.
11.
Lin, C.-F., and His, H.-C. ( 1995). “Resource recovery of waste fly ash: Synthesis of zeolite-like materials.” Envir. Sci. and Technol., 29(4), 1109–1117.
12.
Lindner, G.-G., Massa, W., and Reinen, D. ( 1995). “Structure and properties of hydrothermally synthesized thiosulfate cancrinite.” J. Solid State Chem., 117(2), 386–391.
13.
Maenami, H., Yamamoto, T., Ishida, H., and Mitsuda, T. ( 1996). “Hydrothermally prepared inorganic siliceous wastes: Hydrothermal reaction of calcareous and steatite ceramic tile wastes.” Ceramic Transactions, Vol. 72, V. Jain and D. Peeler, eds., American Ceramic Society, Westerville, Ohio, 375–384.
14.
Mitsuda, T., Sasaki, K., and Ishida, H. ( 1992). “Phase evolution during autoclaving process of aerated concrete.” J. Am. Ceram. Soc., 75(7), 1858–1863.
15.
Mitsuda, T., and Taylor, H. F. W. ( 1978). “Normal and anomalous tobermorite.” Mineralogical Magazine, London, 42, 229–235.
16.
Sakiyama, M., and Mitsuda, T. ( 1977). “Hydrothermal reaction between C-S-H and kaolinite for the formation of tobermorite at 180°C.” Cement and Concrete Res., 7, 681–686.
17.
Shin, H., and Kurushima, T. ( 1997). “Thermodynamic consideration on energy consumption for processing of ceramics.” Ceramics Japan, 32(12), 981–984 (in Japanese).
18.
Tsuji, M., Komarneni, S., and Malla, P. ( 1991). “Substituted tobermorite: 27Al and 29Si MASNMR, cation exchange, and water sorption studies.” J. Am. Ceram. Soc., 74(2), 274–279.
19.
Yamamoto, T., Ishida, H., and Mitsuda, T. ( 1994). “Some properties of autoclaved calcium silicate materials using waste tile: Influence of SiO2 sources.” Ceramic Transactions, Vol. 40, E. M. Gartner and H. Uchikawa, eds., American Ceramic Society, Westerville, Ohio, 231–237.
Information & Authors
Information
Published In
History
Received: May 16, 2000
Published online: Nov 1, 2000
Published in print: Nov 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.