Gray Cast-Iron Water Pipe Metallurgy
Publication: Journal of Materials in Civil Engineering
Volume 12, Issue 3
Abstract
The results of a metallographic study of gray cast-iron water pipes are reported. These pipes were installed between 1885 and 1973 in eight different water systems. Each pipe had been extracted during scheduled maintenance or failure repairs to provide data for a larger study to produce a methodology for determining the residual life of gray cast-iron pipes. This metallographic study was conducted to determine the causes of variations in the mechanical properties of these pipes. Pit-cast and spun-cast pipes were found to have distinctly different types of graphite flakes, flake sizes, and metallic matrices. These differences were directly responsible for the variations in the mechanical properties between the two types of pipes, with the larger flake sizes of the pit-cast pipes, in particular, producing weaker material. Examples of anomalous pipes that did not have the standard appearance of either type of manufacture were also found and the reasons for their appearance identified. The results of the study show that the metallurgy of the pipes may be a major contributing factor, along with external forces such as corrosion or poor installation practices. Metallographic analysis therefore can assist water utilities managers in making decisions on repairs, rehabilitation, and replacement.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Allen, R. M. (1933). “Microstructure of irons in impact investigation, report of subcommittee XV on Impact Testing of Committee A-3 on Cast Iron.” Proc., ASTM, 33(1), 130–137.
2.
American Society for Metals (ASM). (1985). Metals handbook, Desk Ed., Cleveland.
3.
American Society for Metals (ASM). (1988). Metals handbook, 9th Ed., Vol. 15, Cleveland.
4.
American Society for Metals (ASM). (1990). Metals handbook, 10th Ed., Vol. 1, Cleveland.
5.
American Standards Association (ASA). (1939a). . “American standard specifications for pit cast pipe for water and other liquids.” A21.2-1939.
6.
American Standards Association (ASA). (1939b). . “Manual for the computation of strength and thickness of cast iron pipe.” A21.1.-1939/AWWA C101-39.
7.
American Standards Association (ASA). (1953a). . “American standard specifications for cast-iron pipe centrifugally cast in metal molds, for water or other liquids.” A21.6-1953/AWWA C106-53.
8.
American Standards Association (ASA). (1953b). . “American standard specifications for cast-iron pipe centrifugally cast in sand-lined olds for water and other liquids.” A21.8-1953/AWWA C108-53.
9.
American Water Works Association (AWWA). (1908). “Standard specifications for cast iron water pipe and special castings.” 7C.1-1908, Denver.
10.
ASTM. (1998a). . “Test method for evaluating the microstructure of graphite in iron castings.” A 247-67, West Conshohocken, Pa.
11.
ASTM. (1998b). . “Test methods for determining the average grain size.” E 112-96, West Conshohocken, Pa.
12.
Cast Iron Pipe Research Association (CIPRA). (1952). Handbook of cast iron pipe for water, gas, sewage and industrial services, Chicago.
13.
DeRose, P. J., and Parkinson, R. W. (1985). “Corrosion of ductile iron pipe.” Rep. TR241, WRC Engrg., Water Research Centre, Swindon, U.K.
14.
Iron castings handbook. (1981). Iron Castings Society.
15.
Jakobs, J. A. (1985). “Underground corrosion of water pipes in Canadian cities—Case: The city of Calgary.” Final Rep., Caproco Corrosion Prevention Ltd., CANMET Contract Rep. No. 0SQ81-00096, Can. Ctr. for Mineral and Energy Technol., Energy, Mines and Resour. Canada, Canadian Government Publishing Centre, Ottawa.
16.
Kirmeyer, G. J., Richards, W., and Smith, C. D. (1994). An assessment of water distribution systems and associated research needs, American Water Works Association Research Foundation, Denver.
17.
La Que, F. L. (1964). “Corrosion characteristics of ductile iron.” J. AWWA, 56(11), 1433.
18.
Longmuir, P. (1939). Cast iron pipe, Charles Griffin & Co, London.
19.
Loper, C. R., Jr. (1990). “Structure and property control of cast iron, physical metallurgy of cast iron IV.” Proc., 4th Int. Symp. on the Phys. Metallurgy of Cast Iron, Materials Research Society, Pittsburgh.
20.
Makar, J. M. (1999). “Failure analysis of gray cast iron pipes.” Proc., American Water Works Assoc. Distribution Symp., AWWA, Denver.
21.
Makar, J. M. (2000). “A preliminary failure analysis of grey cast iron pipes.” Engrg. Failure Analysis, 7(1), 43–53.
22.
Rajani, B., Zhan, C., and Kuraoka, S. (1996). “Pipe-soil interaction analysis for jointed water mains.” Can. Geotech. J., Ottawa, 33(3), 393–404.
23.
Rajani, B., et al. (1999). “Investigation of grey cast iron mains to develop a methodology for estimating service life.” Rep., American Water Works Association Research Foundation, Denver.
24.
Sears, E. C. (1968). “Comparison of the soil corrosion resistance of ductile iron pipe and gray cast iron pipe.” Mat. Protection, 33–36.
25.
Sun, G. X., and Wang, Y. M. (1990). “The role of dendrites and eutectics in the fracture of grey iron, physical metallurgy of cast iron IV.” Proc., 4th Int. Symp. on the Phys. Metallurgy of Cast Iron, Materials Research Society, Pittsburgh.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 12 • Issue 3 • August 2000
Pages: 245 - 253
History
Received: May 24, 1999
Published online: Aug 1, 2000
Published in print: Aug 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.