Role of Interfaces in Controlling Durability of Fiber-Reinforced Cements
Publication: Journal of Materials in Civil Engineering
Volume 12, Issue 1
Abstract
Microstructural changes that occur over time around fibers in the cement matrix, leading to an enhanced bond and stiffening of the interfacial transition zone, may result in a reduction in the mechanical properties of the composite. Micromechanical modeling of processes of this kind suggest that such aging trends may occur in microfiber reinforcement but not in macrofiber reinforcement. Degradation in mechanical properties of the composite will show up only when a “pessimum” combination of parameters exist, particularly brittle microfibers in a very dense matrix. Therefore, in the development of new cementitious composites, interfacial effects of this kind should be considered, because aging due to such mechanisms can be demonstrated to occur in practice. Thus, it is not sufficient to assess the durability of cementitious composites by considering only the chemical stability of the fiber in the alkaline cementitious matrix.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Akihama, S., Suenaga, T., and Nakagawa, T. (1988). “Carbon fiber reinforced concrete.” Conc. Int. Des. and Constr., 10(1), 40–47.
2.
Aveston, J., Mercer, R. A., and Sillwoood, J. M. (1974). “Fibre reinforced cements—Scientific foundations for specifications.” Compos.—Standards, Testing and Des., Proc., Nat. Phys. Lab. Conf., 93–103.
3.
Bentur, A. ( 1990). “Microstructure, interfacial effects and micromechanics of cementitious composites.” Advances in cementitious materials, Ceramic Transactions, S. Mindess, ed., Vol. 16, American Ceramic Society, 523–549.
4.
Bentur, A. ( 1998). “Long term performance of fiber reinforced cementitious composites.” Materials science in concrete—V, J. P. Skalny and S. Mindess, eds., American Ceramic Society, 513–536.
5.
Bentur, A., et al. (1996). “Fiber-matrix interfaces.” High Perf. Fiber Reinforced Cement Compos., Proc., Int. RILEM Conf., A. E. Naaman and H. W. Reinhard, eds., Vol. 2, E & FN Spon, London, 149–192.
6.
Bentur, A., Kovler, K., and Odler, I. (1997). “Durability of some glass fiber reinforced cementitious composites.” Struct. Failure, Durability and Retrofitting, Proc., Int. Conf., K. C. G. Ong, J. M. Lau and P. Paramasivam, eds., 190–199.
7.
Bentur, A., and Mindess, S. (1990). Fibre reinforced cementitious composites. Elsevier Science, London and New York.
8.
Brandt, A. M. (1985). “On the optimal direction of short metal fibres in brittle matrix composites.” J. Mat. Sci., 20, 3831–3841.
9.
Hikasa, J., Genba, T., Mizobe, A., and Ozaka, M. ( 1986). “Replacement for asbestos in reinforced cement products—Kuralon PVA fibres, properties and structure.” Proc., Man Made Fibres Congr., Austrian Chemical Society, Austria.
10.
Katz, A. (1996). “Effect of fiber modulus of elasticity on the long term properties of micro-fiber reinforced cementitious composites.” Cement and Concrete Comp., 18(6), 389–400.
11.
Katz, A., and Bentur, A. (1995). “Effect of matrix composition on the aging of carbon fiber reinforced cement.” Cement and Concrete Comp., 17(2), 87–97.
12.
Katz, A., and Bentur, A. (1996). “Mechanisms and processes leading to changes in time in the properties of CFRC.” Advanced Cement Based Mat., 3(1), 1–13.
13.
Katz, A., and Li, V. C. (1995). “Inclination angle effect of carbon fiber in cementitious composites.”J. Engrg. Mech., ASCE, 121(12), 1340–1348.
14.
Krenchel, H. (1964). Fibre reinforcement. Akademisk Forlag, Copenhagen.
15.
Kuruki, Y., and Hayashi, M. (1986). “Durability of GFRC bending strength and fibre/matrix boundary microstructure.” Proc., Man Made Fibres Congr., Austrian Chemical Society, Austria, 129–138.
16.
Leung, C. K. Y., and Chi, J. (1995). “Derivation of crack bridging force in random ductile fiber brittle matrix composites.”J. Engrg. Mech., ASCE, 121(12), 1315–1324.
17.
Leung, C. K. Y., and Li, V. C. (1992). “Effect of fiber inclination on crack bridging stress in brittle fiber reinforced cement brittle matrix composites.” J. Mech. Phys. Solids, 40(6), 1333–1362.
18.
Li, Z., Mobasher, B., and Shah, S. P. (1991). “Characterization of interfacial properties of fiber reinforced cementitious composites.” J. Am. Ceramic Soc., 74(9), 2156–2164.
19.
Li, V. C., Wang, Y., and Backer, S. (1990). “Effect of Inclining Angle, Bundling and Surface Treatment on Synthetic Fiber Pull-out from a Cement Matrix.” Compos., 21(2), 132–140.
20.
Majumdar, A. J., and Laws, V. (1991). Glass fibre reinforced cement. BSP Professional Books, U.K.
21.
Morton, J., and Groves, G. W. (1974). “The cracking of composites consisting of discontinuous ductile fibers in a brittle matrix—Effect of fibre orientation.” J. Mat. Sci., 9, 1974, 1436–1445.
22.
Naaman, A. E., and Shah, S. P. (1976). “Pull-out mechanisms in steel fiber reinforced concrete.”J. Struct. Div., ASCE, 102(8), 1537–1548.
23.
Nakamura, M., Sakai, H., Awata, M., and Mitsui, Y. (1993). “Experimental study for the durability of carbon fiber reinforced cement composite.” Durability of Build. Mat. and Components, Proc. 6th Int. Conf., S. Nagataki, T. Nireki, and F. Tomosawa, eds., Vol. 6, E & FN Spon, London, 119–128.
24.
Stucke, M., and Majumdar, A. J. (1976). “Microstructure of glass fibre reinforced cement composites.” J. Mat. Sci., 11, 1019–1030.
25.
Wang, Y. (1998). “Toughness characteristics of synthetic fibre-reinforced cementitious composites.” Fatigue and Fracture of Engrg. Mat. and Struct., 21, 521–532.
26.
Zhu, W., and Bartos, P. J. M. (1997). “Assessment of interfacial microstructure and bond properties in aged GRC using a novel microindentation method.” Cement and Concrete Res., 27(11), 1701–1711.
Information & Authors
Information
Published In
History
Received: Aug 25, 1999
Published online: Feb 1, 2000
Published in print: Feb 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.