Cement Treated Marginal Aggregates for Roads
Publication: Journal of Materials in Civil Engineering
Volume 11, Issue 3
Abstract
Low-grade laterite and pit-run gravel aggregates available in abundance in eastern India may be turned into a cost-effective base for low-volume roads when ordinary portland cement, river sand, and aggregates are mixed in a 1:6:12 proportion by weight. 152 × 152 × 152 mm3 cubes were cast at several water-cement ratios and the mix was compacted by a vibratory plate compactor. The compressive strength test was determined for different water-cement ratios, and the one that gave the maximum strength was used to prepare 102 × 102 × 508 mm3 beam specimens. A number of cubes and beams were kept inside airtight polyethylene bags for accelerated curing at a temperature of 50°C. Modulus of rupture and flexural fatigue tests were carried for the evaluation of pavement design parameters. A methodology of design of a lightly cemented pavement along with an example are also presented.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bhattacharya, P. G., and Pandey, B. B. (1986). “Flexural fatigue strength of lime-laterite soil.” Transp. Res. Rec. 1089, Transportation Research Board, Washington, D.C., 86–92.
2.
Bhattacharya, P. G., and Pandey, B. B. ( 1987). “Flexural fatigue strength of lime-laterite soils at different densities and thickness design procedure for lime-laterite pavement base.” Hwy. Res. Bull. No. 29, Soil Engineering, Indian Roads Congress, New Delhi, 1–18.
3.
Civil Engineering Department, IIT, Kharagpur. (1996). “Development of computer program for design of flexible pavement: Road research scheme R-56.” Tech. Rep. No. 5, Ministry of Surface Transport (MOST), New Delhi.
4.
Gidigasu, M. D. (1976). Laterite soil engineering. Elsevier Science, New York.
5.
“Indian standard methods of test for aggregates for concrete.” (1963a). IS:2386-1963, Bureau of Indian Standards.
6.
“Indian standard specifications for coarse and fine aggregates from natural sources.” (1963b). IS:383-1963, Bureau of Indian Standards.
7.
“Indian standard specification for portland slag cement (fourth revision),” (1989). IS:455-1989, Bureau of Indian Standards.
8.
ISI handbook on concrete mixes. (1983). SP-23 (S&T), Bureau of Indian Standards.
9.
Kumar, M. J. R., and Pandey, B. B. ( 1992). “Structural properties of cement treated laterite soils.” Hwy. Res. Bull. No. 47, Indian Roads Congress, New Delhi. 33–42.
10.
Majumder, B. ( 1992). “Lean cement concrete in pavement construction,” M.Tech thesis, Civ. Engrg. Dept., Indian Institute of Technology, Kharagpur, India.
11.
Mitchell, J. K., and Monismith, C. L. (1977). “A thickness design procedure for pavements with cement stabilized bases and their asphalt surfacing.” Proc., 4th Int. Conf. of Struct. Des. of Asphalt Pavements, 409–416.
12.
Specifications of road and bridge works (third revision). (1995). Ministry of Surface Transport (MOST), Indian Roads Congress, New Delhi.
13.
“Tentative guidelines for the use of low grade aggregates and soil aggregate mixtures in road pavement construction.” (1976). IRC:63-1976, Indian Roads Congress, New Delhi.
14.
“Tentative guidelines lean-cement concrete and lean cement-fly-ash concrete as pavement base or subbase.” (1979). IRC:74-1979, Indian Roads Congress, New Delhi.
Information & Authors
Information
Published In
History
Received: Mar 17, 1997
Published online: Aug 1, 1999
Published in print: Aug 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.