Test Methods for Measuring Fluid Transport in Cover Concrete
Publication: Journal of Materials in Civil Engineering
Volume 11, Issue 2
Abstract
Four tests for measuring the surface properties of concrete have been studied: (1) The initial surface absorption test; (2) Figg's air permeation index (Figg) test; (3) the covercrete absorption test (CAT); and (4) the air permeability of the near surface test. Analytical models are presented for each of the tests to relate the results to fundamental properties of the concrete. Experimental results are presented for the application of a vacuum technique for preconditioning concrete in situ prior to the Figg test and CAT. The application of vacuum using the initial surface absorption test cap did not lead to satisfactory results with these tests. However, direct application of vacuum to the Figg and CAT heads prior to testing resulted in improvement of the reproducibility of the permeation indices obtained from these tests. The analytical models were then used in combination with the experimental results to draw conclusions about the choice of test method for practical applications.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bamforth, P. B. ( 1987). “The relationship between permeability coefficients for concrete using liquid and gas.” Mag. of Concrete Res., 39(138), 3–11.
2.
Bungey, J. H. ( 1989). The testing of concrete in structures. Surrey University Press, London, 137–161.
3.
Cather, R., Figg, J. W., Marsden, A. F., and O'Brien, T. P. ( 1984). “Improvements to the Figg method for determining the air permeability of concrete.” Mag. of Concrete Res., 36(129), 241–245.
4.
Claisse, P. A., Elsayad, H. I., and Shaaban, I. G. (1997). “Absorption and sorptivity of cover concrete.”J. Mat. in Civ. Engrg., ASCE, 9(3), 105–110.
5.
Dhir, R. K., Hewlett, P. C., Byars, E. A., and Shaaban, I. G. ( 1995). “A new technique for measuring the air permeability of near-surface concrete.” Mag. of Concrete Res., 47(171), 167–176.
6.
Dhir, R. K., Hewlett, P. C., and Chan, Y. N. ( 1987). “Near surface characteristics of concrete: Assessment and development of in-situ test methods.” Mag. of Concrete Res., 39(141), 183–195.
7.
Dhir, R. K., Shaaban, I. G., Claisse, P. A., and Byars, E. A. ( 1993). “Preconditioning in-situ concrete for permeation testing, Part 1: Initial surface absorption.” Mag. of Concrete Res., 45(163), 113–118.
8.
Figg, J. W. ( 1973). “Methods of measuring air and water permeability of concrete.” Mag. of Concrete Res., 25(85), 213–219.
9.
Harris, A. W., Atkinson, A., and Claisse, P. A. ( 1993). “Transport of gases through concrete barriers.” Rep. No. EUR14194 EN, Commission of the European Communities, Brussels, Belgium.
10.
Illston, J. M. ( 1994). Construction materials, 2nd Ed., E & FN Spon, London, 171.
11.
Kennedy, J. B., and Neville, A. M. ( 1986). Basic statistical methods for engineers and scientists, 3rd Ed., Harper & Row, New York.
12.
“Methods of testing hardened concrete for other than strength: Part 5.” (1970). BS 1881, British Standards Institute, London.
Information & Authors
Information
Published In
History
Published online: May 1, 1999
Published in print: May 1999
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.