Potential for Using Waste Glass in Portland Cement Concrete
Publication: Journal of Materials in Civil Engineering
Volume 10, Issue 4
Abstract
Local recycling pressures are providing an impetus to examine the use of unconventional materials in construction such as waste glass in Portland cement concrete. It is well known that the silica in glass can be highly reactive with the alkalis in cement paste and that this reaction can lead to expansion and cracking of the concrete (alkali-silica reaction or ASR). The potential is examined for controlling ASR and achieving concrete of suitable strength and durability that uses waste glass as the aggregate. Laboratory and field research have been completed with concrete mixtures designed primarily for paving or flat-work applications. Various gradations of glass particle sizes added at various fractions of total aggregate content have been studied. Compressive strength and wet prism expansion are two of the parameters monitored. The study has spanned several years and has revealed both glass aggregate concrete mixtures that show great promise as well as mixtures that fail rapidly. Continued monitoring of the performance of the successful mixes over a period of several more years will provide an important step toward defining those situations where waste glass can be used in concrete.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Attiogbe, E. K.(1996). “Predicting freeze-thaw durability of concrete—a new approach.”ACI Mat. J., 93(5), 457–464.
2.
Bérubé, M. A., Carles-Gibergues, A., Duchesne, J., and Naproux, P.(1995). “Influence of particle size distribution on the effectiveness of type-F fly ash in suppressing expansion due to alkali-silica reactivity.”Proc., 5th Int. Conf. on Fly Ash, Silica Fume, Slag, and Nat. Pozzolans in Concrete, American Concrete Institute, Detroit, Mich., 1, 177–192.
3.
Cabrera, J. G.(1986). “Evaluation of the properties of British pulverized fuel ashes and their influence on the strength of concrete.”Proc., 2nd Int. Conf. on Fly Ash, Silica Fume, Slag and Nat. Pozzolans in Concrete, American Concrete Institute, Detroit, Mich., 1, 115–144.
4.
Duchesne, J., and Bérubé, M. A.(1994a). “The effectiveness of supplementary cementing materials in suppressing expansion due to ASR: another look at the reaction mechanism. I: Concrete expansion and portlandite depletion.”Cement and Concrete Res., 24(1), 73–82.
5.
Duchesne, J., and Bérubé, M. A.(1994b). “The effectiveness of supplementary cementing materials in suppressing expansion due to ASR: another look at the reaction mechanism. II: Pore solution chemistry.”Cement and Concrete Res., 24(2), 221–230.
6.
Figg, J. W. (1981). “Reaction between cement and artificial glass in concrete.”Proc., Conf. on Alkali-Aggregate Reaction in Concrete, Cape Town, South Africa.
7.
Gaudette, S. P. (1993). “Pilot study on the effects of waste glass aggregate on Portland cement concrete,” MS thesis, Dept. of Civ. and Envir. Engrg., University of Wisconsin–Madison, Madison, Wisc.
8.
Hobbs, D. W. (1988). Alkali-silica reaction in concrete, Thomas Telford, London, U.K.
9.
Johnston, C. D.(1974). “Waste glass as coarse aggregate for concrete.”J. Testing and Evaluation, 2(5), 344–350.
10.
Kosmatka, S. H., and Panarese, W. C. (1988). Design and control of concrete mixtures, 13th Ed., Portland Cement Association, Skokie, Ill.
11.
Liles, K. J. (1976). “Lightweight structural concrete aggregate from municipal waste glass.”Proc., 5th Mineral Waste Utilization Symp., IIT Research Institute, Chicago, Ill., 219–222.
12.
Meyer, C., Baxter, S., and Weihua, J. (1996). “Alkali-silica reaction in concrete with waste glass as aggregate.”Proc., 4th Mat. Engrg. Conf.: Mat. for the New Millennium, ASCE, Reston, Va., 1388–1397.
13.
Neville, A. M. (1981). Properties of concrete, 3rd Ed., Pitman, Marshfield, Mass.
14.
Phillips, J. C., Cahn, D. S., and Keller, G. W. (1972). “Refuse glass aggregate in portland cement concrete.”Proc., 3rd Mineral Waste Utilization Symp., IIT Research Institute, Chicago, Ill., 385–390.
15.
Roberts, L. R. (1989). “Microsilica in concrete. I.”Material science of concrete I, American Ceramic Society, Westerville, Ohio, 197–222.
16.
Rogers, C. A., and Hooton, R. D.(1991). “Reduction in mortar and concrete expansion with reactive aggregates due to alkali leaching.”Cement, Concrete and Aggregates, 13(1), 42–49.
17.
Schmidt, A., and Saia, W. H. F.(1963). “Alkali-aggregate reaction tests on glass used for exposed aggregate wall panel work.”ACI Mat. J., 60, 1235–1236.
18.
Scrivener, K. L. (1989). “The microstructure of concrete.”Mat. Sci. of Concrete I, American Ceramic Society, Westerville, Ohio, 127–161. Standard specification for road and bridge construction . (1989). Wisconsin Department of Transportation, Madison, Wisc.
19.
Swamy, R. N.(1983). “New concrete materials.”Concrete Technol. and Des., 1, 154–157.
20.
Tang, M., Xu, Z., and Han, S.(1987). “Alkali reactivity of glass aggregate.”Durability of Build. Mat., 4(4), 377–385.
21.
Vimawala, D. P. (1992). “Expansion of glass-containing concrete and an introduction to the alkali-silica reaction,” MS thesis, Dept. of Civ. Engrg., University of Wisconsin–Madison, Madison, Wisc.
Information & Authors
Information
Published In
Copyright
Copyright © 1998 American Society of Civil Engineers.
History
Published online: Nov 1, 1998
Published in print: Nov 1998
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.