Microstructural Features of Railseat Deterioration in Concrete Ties
Publication: Journal of Materials in Civil Engineering
Volume 9, Issue 3
Abstract
Deterioration has been observed in concrete railroad ties, producing a loss of up to 40 mm at the railseat and leaving a rough surface formed mainly by aggregates. This deterioration occurs largely in cold and wet regions of western Canada and northern United States. The purpose of the present investigation was to deduce the processes responsible for this deterioration. Proposed mechanisms included abrasion, erosion, hydraulic pressure, freeze-thaw cycles, and chemical deterioration. Microstructural features associated with each mechanism were explored using laboratory concrete subjected to known deterioration processes or through computer simulations. Microstructural studies utilized scanning electron microscopy and x-ray diffraction. Based on the microstructural evidence, it was concluded that the railseat deterioration is produced by a combination of abrasion and freeze-thaw or hydraulic pressure.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Almond, D. K., and Janssen, D. J. (1991). “The Washington hydraulic fracture test for concrete aggregates exposed to freezing and thawing.”Proc., 2nd ACI/Canmet Int. Conf. on Durability of Concrete, Supplementary Papers, Am. Concrete Inst., Detroit, Mich., 265–293.
2.
Amenzade, A. Y. (1979). Theory of elasticity. Mir Publishers, Moscow, Russia.
3.
Bakharev, T. (1994). “Microstructural features of railseat deterioration in concrete railroad ties,” MS thesis, Dept. of Civ. Engrg., Univ. of Illinois, Urbana, Il.
4.
Heinz, D., and Ludwig, U. (1987). “Mechanism of second ettringite formation in mortars and concretes subjected to heat treatment.”Concrete Durability, SP-100-2, 2059–2071, Am. Concrete Inst., Detroit, Mich.
5.
Heinz, D., Ludwig, U., and Rudiger, I.(1989). “Delayed ettringite formation in heat treated mortars and concretes.”Concrete Precasting Plant and Technol., 11, 56–61.
6.
Jones, T. N., and Poole, A. B. (1987). “Alkali silica reaction in several U.K. concretes: the effect of temperature and humidity on expansion and the significance of ettringite development.”Concrete Alkali-Aggregate Reaction, Noyes Publications, New York, N.Y., 446–450.
7.
Mindness, S., and Young, J. F. (1981). Concrete. Prentice-Hall, Inc., Englewood Cliffs, N.J.
8.
Powers, T. C.(1945). “A working hypothesis for further studies of frost resistance of concrete.”Proc., Am. Concrete Inst., 41, 245–272.
9.
Regourd, M., Hornain, H., and Poitevin, P. (1981). “Alkali reaction—concrete microstructural evolutions.”Proc., 5th Int. Conf. on AAR, S252/35, 1-10, Nat. Build. Res. Inst. of the CSIR, Capetown, South Africa.
10.
Scrivener, K. L., and Taylor, H. F. W.(1993). “Delayed ettringite formation: a microstructural and microanalytical study.”Adv. Cement Res., 5(20), 139–146.
11.
Shayan, A., and Quick, G. W.(1992). “Microscopic features of cracked and uncracked concrete railway sleepers.”ACI Mat. J., 89(4), 348–361.
12.
Struble, L., and Stutzman, P.(1989). “Epoxy impregnation of hardened cement for microstructural characterization.”J. Mat. Sci. Lett., 8, 632–634.
13.
Young, J. F. (1988). “A review of the pore structure of cement paste and concrete and its influence on permeability.”Concrete Permeability, SP 108-1, 13-18, Am. Concrete Inst., Detroit, Mich.
14.
Zaremski, A. M., Chambers, S. K., and Talbot, A. N. (1980). “Stresses in rail road track: the Talbot reports.”Reprinted Rep., Spec. Com. on Stresses in Rail Road Track 1918–1940, Am. Railway Engrg. Assn., Washington, D.C.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 9 • Issue 3 • August 1997
Pages: 146 - 153
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Aug 1, 1997
Published in print: Aug 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.