Exposure of Concrete in Different Marine Environments
Publication: Journal of Materials in Civil Engineering
Volume 9, Issue 1
Abstract
The severity of marine environments varies depending on location and has a major bearing on the durability performance of marine structures. A series of concrete specimens was cast, was exposed to four marine environments for two years, and the effect of marine exposure was estimated from chloride ingress levels. Two marine sites in South Africa were chosen, being either sheltered or exposed to severe wave action. At each site, concrete was placed in the tidal and spray zones. Results from this work indicated that concrete in the tidal zone exposed to heavy wave action had significantly higher chloride levels than concrete sheltered from wave action. When predicting the potential durability of marine concrete, allowance must be made for the severity of exposure together with material properties since both factors determine long-term durability performance. The results also have implications for laboratory simulations of marine exposure under relatively stagnant conditions.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Arya, C., Buenfeld, N. R., and Newman, J. B.(1990). “Factors influencing chloride binding in concrete.”Cement and Concrete Res., 20(2), 291–300.
2.
Bamforth, P. B. (1993). “Concrete classification for r.c. structures exposed to marine or other salt-laden environment.”Proc., Struct. Faults and Repair—'93, 31–40.
3.
Bamforth, P. B. (1995). “Improving the durability of concrete by the use of mineral additions.”Symp. Proc., Concrete Durability in the Arabian Gulf, Bahrain Inst. of Engrs., 86–99.
4.
British Standards Institute. (1988). “Chloride content determination for concrete.” BS 1881, Part 124, British Standards Inst., London.
5.
Buenfeld, N. R., and Newman, J. B.(1984). “The permeability of concrete in a marine environment.”Mag. of Concrete Res., 36(127), 67–80.
6.
Crank, J. (1975). The mathematics of diffusion, 2nd Ed., Oxford University Press, New York, N.Y.
7.
Dhir, R. K., Jones, M. R., and McCarthy, M. J.(1994). “Pfa concrete: chloride induced reinforcement corrosion.”Mag. of Concrete Res., 46(169), 269–277.
8.
“Durability of high performance concrete.” (1995). Mat. and Struct., 28(175), 56–61.
9.
Gjorv, O. E., Tan, K., and Zhang, M. H.(1994). “Diffusivity of chloride from seawater into high strength lightweight concrete.”ACI Mat. J., 91(5), 447–452.
10.
Mackechnie, J. R. (1995). “Predictions of reinforced concrete durability in the marine environment,” PhD thesis, Univ. of Cape Town, Rondebosch, South Africa.
11.
Sandberg, P., and Tang, L. (1994). “A field study of the penetration of chlorides and other ions into a high quality concrete marine bridge column.”Proc., 3rd ACI Conf. on the Durability of Concrete, Am. Concrete Inst., Detroit, 557–571.
12.
Streicher, P. E., and Alexander, M. G.(1995). “A chloride conduction test for concrete.”Cement and Concrete Res., 25(6), 1284–1294.
Information & Authors
Information
Published In
Copyright
Copyright © 1997 American Society of Civil Engineers.
History
Published online: Feb 1, 1997
Published in print: Feb 1997
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.