Experimental Investigation of Tensile Fracture in Polyurethane Foams
Publication: Journal of Materials in Civil Engineering
Volume 7, Issue 4
Abstract
Polyurethane foams have been used for their shock-absorption properties in various packaging applications. In many lightweight structural applications, polyurethane foams are used as the core material in sandwich beams or in panel construction. The mechanical properties of these foams have come under increased scrutiny because of their application to nuclear-waste shipment packages, and their use as “bone simulants” in testing orthopedic implants. This paper describes a number of tests performed on polyurethane foams of various densities to understand their tensile fracture characteristics. Uniaxial tension, torsion, and Flexure tests were conducted to study size effect and other fracture-related phenomena. Nonlinear fracture phenomena were studied using optical microscopy and holographic interferometry at the microscopic and macroscopic level. Uniaxial tensile tests show linear elastic response leading to brittle failure. However, other experiments demonstrate nonlinear phenomena such as the existence of a fracture process zone and the demonstration of a size effect less than that predicted by linear elastic fracture mechanics. Factors affecting various mechanical properties were examined with the existing theories of solid mechanics.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bazant, Z. P. (1991). “Rate effect, size effect and nonlocal concepts for fracture of concrete and other quasi-brittle materials.”Toughening mechanisms in quasi-brittle materials, S. P. Shah, ed., Kluwer Academic Publishers Group, Boston, Mass., 131–153.
2.
Evans, A. G.(1990). “Perspective on the development of high-toughness ceramics.”J. Am. Ceramic Soc., 73(2), 187–206.
3.
Gent, A. N., and Thomas, A. G.(1959). “The deformation of foamed elastic materials.”J. Appl. Polymer Sci., 15(1), 107–113.
4.
Gibson, L. J., and Ashby, M. F. (1982). “The mechanics of three-dimensional cellular materials.”Proc., Royal Society, London, England, Vol. A382, 43–59.
5.
Gibson, L. J., and Ashby, M. F. (1988). Cellular solids, structure and properties . Pergamon Press, Inc., Elmsford, N.Y.
6.
Groth, H. L., and Zenkert, D.(1990). “Fracture of defect foam core sandwich beams.”J. Testing and Evaluation, 18(6), 390–395.
7.
Hein, T. J., Hotchkiss, R., Perissinotto, A., and Chao, Y. S. (1987). “Analysis of bone model material for external fracture fixation experiments.”Paper #87-0108, Instrument Soc. of America (ISA), 43–48.
8.
Jayatilaka, S. A. (1979). Fracture of engineering brittle materials . Applied Science Publishers, Ltd., London, England.
9.
Lederman, J. M. (1971). “The prediction of the tensile properties of flexible foams.”J. Appl. Polymer Sci., Vol. 15, 693–703.
10.
Maji, A. K., and Wang, J. L. (1992). “Experimental study of fracture processes in rocks.”J. Rock Mech. and Rock Engrg., Vol. 25, 25–47.
11.
Maji, A. K., Schreyer, H. L., Donald, S., Zuo, Q., and Satpathi, D.(1995). “Mechanical behavior of polyurethane foam impact-limiters.”J. Engrg. Mech., ASCE, 121(4), 528–540.
12.
Mindess, S. (1991). “Fracture process zone detection.”Fracture mechanics test methods for concrete, RILEM Report 5, Chapman & Hall, Ltd., London, England, 231–262.
13.
Nuclear Packaging Company. (1990). “Development of NUPAC-140B, 100 ton rail/barge cask.”DOE Publication, DOE/ID/12700-1, Vol. 1, Dept. of Energy (DOE), Idaho Operations Ofc., Idaho Falls, Idaho, 1–25.
14.
Patel, M. R., and Finnie, I.(1970). “Structural features and mechanical properties of rigid cellular plastics.”J. Mat., 5(4), 909–932.
15.
Sadananda, R.(1991). “A probabilistic approach to bone fracture analysis.”J. Mat. Res., 6(1), 202–206.
16.
“Sandwich construction and core materials, general test methods.” (1967). MIL-STD-401B, Dept. of Defence, Washington, D.C.
17.
“Standard test method for compressive properties of rigid cellular plastics.” (1990). Annual book of ASTM standards, Vol. 08.02, Plastics (II): D1601-D3099, ASTM, Philadelphia, Pa.
18.
Tada, H. (1973). The stress analysis of cracks handbook . Del Research Corp., Hellertown, Pa.
19.
“Toughness mechanisms in quasi-brittle materials.” (1990). Proc., NATO Advanced Res. Workshop, S. P. Shah, ed., Northwestern Univ., Evanston, Ill.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 7 • Issue 4 • November 1995
Pages: 258 - 264
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Nov 1, 1995
Published in print: Nov 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.