Thermal Degradation of Antistripping Agents and Enhanced Performance by Curing
Publication: Journal of Materials in Civil Engineering
Volume 5, Issue 1
Abstract
The heat stability of antistripping (AS) additives held in hot asphalt cement is investigated by observing the changes in additive concentration and additive performance with holding time at 162.8°C. The effect of mix curing by hot storage 149°C on stripping resistance is also investigated. The diffusitivity of an additive in hot‐asphalt cement is measured to determine the rate of additive migration to the aggregate surface during curing. The concentrations of all commercial AS additives tested are observed to decrease significantly when heated in asphalt at 162.8°C, with a corresponding loss in effectiveness. It is also found that mixture curing by hot storage remarkably improved stripping resistance. This is believed to be due to improved adhesion of asphalt to the aggregate surface. Additive migration rate to the aggregate surface is shown to be higher than apparent curing rate. This implies that the enhanced stripping resistance observed with curing is not due to additive migration. Asphalt hardening occurring during mixture curing is shown to have only a second‐order effect on stripping resistance.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Crank, J. (1975). The mathematics of diffusion. Clarendon Press, Oxford, U.K.
2.
Dybalski, J. N. (1982). “Cationic surfactants in asphalt adhesion.” Proc. of Assoc. of Asphalt Paving Tech. (AAPT), 51, 244–252.
3.
Hellgeth, J. W., Amateis, P. G., and Taylor, L. T. (1984). “The fate of nitrogen model process solvents in coal liquefaction.” Preprint Paper, American Chem. Soc., 29(5), 99–105.
4.
Huber, C. F., and Thompson, P. F. (1955). “The function and chemistry of asphalt additives.” Proc. of Assoc. of Asphalt Paving Tech. (AAPT), 24, 374–391.
5.
Kandhal, P. S., and Wengler, M. E. (1974). “Storage of bituminous concrete in inert gas.” Highway Res. Record, 468, 61–72.
6.
Linfield, W. M. (1969). Straight‐chain alkylammonium compounds in cationic surfactants.” Surfactant Sci. Series 4, E. Jungermann, ed., Marcel Dekker, New York, 9–70.
7.
Mathews, D. H. (1962). “Surface‐active agents in bituminous road materials.” J. Appl. Chem., 12, Feb., 43–51, 56–64.
8.
O'Connor, D. L. (1984). “Action taken by the TDOHPT to identify and reduce the stripping potential of asphalt mixes.” Proc. of Assoc. of Asphalt Paving Tech. (AAPT), 53, 631–637.
9.
Petersen, J. C., Ensley, E. K., and Barbour, F. A. (1974). “Molecular interactions of asphalt in the asphalt‐aggregate interaction region.” Transp. Res. Record, 515, 67–78.
10.
Tunnicliff, D. G., and Root, R. E. (1984). “Use of antistripping additives in asphaltic concrete mixtures.” NCHRP Report 274, NCHRP, Washington, D.C.
11.
Yoon, H. H. (1987). “Interface phenomena and surfactants in asphalt paving materials,” PhD thesis, Auburn University, Auburn, Ala.
12.
Zdeb, M. S., and Brown, R. A. (1974). “Storage of asphalt concrete.” Transp. Res. Record, 515, 79–88.
Information & Authors
Information
Published In
Copyright
Copyright © 1993 American Society of Civil Engineers.
History
Received: Jul 25, 1989
Published online: Feb 1, 1993
Published in print: Feb 1993
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.