Properties of Gypsum Wallboards Containing Fly Ash
Publication: Journal of Materials in Civil Engineering
Volume 4, Issue 2
Abstract
In this study, the effect of replacing calcined gypsum in wallboards with fly ash was studied. Three types of fly ash produced in Alberta, Canada, were used for replacement of as much as 40% of the calcined gypsum in wallboards. All the three types of fly ash were pozzolanic as well as self‐cementitious. Wallboard specimens were prepared in the laboratory, placing gypsum, fly ash, pulp, starch, and foam slurry between two sheets of paper. Strength and other physical properties of wallboards, with and without fly ash, were determined. It was concluded that as much as 30% gypsum in the core of wallboards can be replaced by fly ash with very little detrimental effect on the properties of the wallboard. The results indicated there was only a slight loss in the compressive strength for 30% replacement of gypsum with fly ash. Wallboards containing fly ash developed high core hardness, nailhead pull resistance, and water resistance. They were also observed to have lower thermal conductivity than those containing only calcined gypsum.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
1988 annual book of ASTM standards. (1988). Vol. 04.01, American Society for Testing and Materials, Philadelphia, Pa.
2.
Berry, E. E., and Malhotra, V. M. (1980). “Fly ash for use in concrete—A critical review.” ACI J., 77(2), 59–73.
3.
Hansen, W. C. (1963). “The setting and hardening of gypsum plasters.” Materials Research and Standards, 3(5), 359–362.
4.
Hansen, W. C., Offut, J. S., Roy, D. M., Grutzeck, M. W., and Schatzlein, K. J. (1988). Gypsum and anhydrite in portland cement. 3rd Ed., United States Gypsum Co., Chicago, Ill., 1–10.
5.
Izmailova, V. N., Segelova, E. E., and Rebinder, P. A. (1956). “A study of structure formation in water suspensions of gypsum.” Doklady Akad. Nauk SSSR, 107(3), 425–427.
6.
Joshi, R. C., and Ward, M. A. (1980). “Self cementitious fly ashes—Structure and hydration mechanisms.” Proc. of the Seventh Int. Congress on the Chemistry of Cement, Editions Septima, Paris, France.
7.
Joshi, R. C. (1981). “Geotechnical aspects of coal ash production, disposal and utilization.” Proc. of the Workshop on Coal Ash and Reclamation, Alberta Land Conservation and Reclamation Council, Edmonton, Canada, 3–27.
8.
Kocman, V. (1984). “Rapid multielement analysis of gypsum and gypsum products by X‐ray fluorescence spectroscopy.” The chemistry and technology of gypsum, ASTM STP 861, R. A. Kuntze, ed., ASTM, Philadelphia, Pa., 72–83.
9.
Kuntsevich, O. V., Aleksandrov, P. E., Ratinov, V. B., Rozenberg, T. I., and Bogautdinova, G. G. (1955). “The theory of the setting of gypsum bonding materials.” Doklady Akad. Nauk SSSR, 104(4), 587–588.
10.
Natt, G. S., and Joshi, R. C. (1982). “Roller compacted high fly ash concrete.” Research Report CE‐85, Dept. of Civil Engineering, University of Calgary, Calgary, Alberta, Canada.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: May 1, 1992
Published in print: May 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.