Fracture Model Evaluation of Dam Concrete
Publication: Journal of Materials in Civil Engineering
Volume 3, Issue 4
Abstract
The following fracture models are assessed on the basis of an extensive testing program of large wedge‐splitting specimens: Bažant's size effect law; Hil‐lerborg's fictitious crack model; Carpinteri's brittleness model; and Shah and Jenq's two‐parameter model. Experimental data reinforce the validity of the size effect law with respect to specimen sizes. Fracture toughness values determined through the compliance method are compared with the model predictions. Results are discussed regarding specimen size requirement for linear elastic fracture mechanics (LEFM) applicability. On the basis of the size effect law and the fictitious crack model, the wedge‐splitting specimen sizes used are still too small for a classical LEFM analysis to be valid. The fracture models and their corresponding brittleness number are compared and found to be related to each other. They can be traced to Griffith's linear elastic fracture mechanics theory. The experimental results are then extrapolated to large structures, such as dams, and the limits of validity of both linear elastic and nonlinear fracture mechanics structural analyses are discussed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bažant, Z. P. (1984). “Size effect in blunt fracture: Concrete, rock, metal.” J. Engrg. Mech., ASCE, 110(4), 518–535.
2.
Bažant, Z. P. (1985). “Comment on Hillerborg's comparison of size effect law with fictitious crack model.” Dei Poli anniversary volume, L. Cedolin, ed., Politecnico di Milano, Italy, 335–338.
3.
Bažant, Z. P. (1987). “Fracture energy of heterogeneous materials and similitude.” RILEM‐SEM Int. Conference on Fracture Mechanics of Rock and Concrete, S. P. Shah, and S. E. Swartz, eds., Springer‐Verlag, New York, N.Y. 390–402.
4.
Broek, D. (1986). Elementary engineering fracture mechanics, 4th Ed., Martinus Nijhoff Publishers, the Netherlands.
5.
Broz, J. J. (1989). “Experimental fracture mechanics of concrete dams,” thesis presented to University of Colorado, at Boulder, Colo., in partial fulfillment of the requirements for the degree of Master of Science.
6.
Brühwiler, E. (1988). “Fracture mechanics of dam concrete subjected to quasi‐static and seismic loading conditions,” thesis presented to the Swiss Federal Institute of Technology, at Lausanne, Switzerland, in partial fulfillment of the requirements for the degree of Doctor of Philosophy (in German).
7.
Brühwiler, E., and Roelfstra, P. E. (1989). “Tensile softening properties and structural response of a concrete member.” Proc. Recent Developments in the Fracture of Concrete and Rock, S. P. Shah, S. E. Swartz, and B. I. G. Barr, Elsevier, Amsterdam, the Netherlands, 682–692.
8.
Carpinteri, A. (1982a). “Application of fracture mechanics to concrete structures.” J. Struct. Div., ASCE, 108, 833–848.
9.
Carpinteri, A. (1982b). “Notch sensitivity in fracture testing of aggregative materials.” Engineering Fracture Mechanics, 16, 467–481.
10.
Carpinteri, A. (1986). Mechanical damage and crack growth in concrete. Martinus Nijhoff Publishers.
11.
El‐Aidi, B., and Hall, J. F. (1989). Non‐linear earthquake response of concrete gravity dams, Part 1: Modeling. Earthquake Engrg. Struct. Dyn., 18, 837–851.
12.
Elfgren, L., ed. (1989). “Fracture mechanics of concrete structures—From theory to applications, state of the art report.” RILEM TC 90‐FMA, Chapman and Hall, London, England.
13.
Engineering guidelines for the evaluation of hydropower projects. (1987). Federal Energy Regulatory Commission, Office of Hydropower Licensing, Washington, D.C.
14.
Griffith, A. A. (1921). “The phenomena of rupture and flow in solids.” Phil. Trans. Roy. Soc. London, A221, 163–197.
15.
Hillerborg, A., Modeer, M., and Petersson, P. E. (1976). Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement Concr. Res., 6, 773–782.
16.
Hillerborg, A. (1983). “Analysis of one single crack.” Fracture Mechanics of Concrete, F. H. Wittmann, ed., Elsevier, Amsterdam, the Netherlands, 223–249.
17.
Hillerborg, A. (1985). “A comparison between the size effect law and the fictitious crack model.” Dei Poli anniversary volume, L. Cedolin, ed., Politecnico di Milano, Milan, Italy, 329–334.
18.
Horii, H., and Nemat‐Nasser, N. (1986). “Brittle failure in compression: Splitting, faulting and brittle ductile transition.” Phil. Trans. Royal Soc. London, A319, 337–374.
19.
Irwin, G. R. (1957). “Analysis of stresses and strains near the end of a crack traversing a plate.” J. Appl. Mech. Trans. ASME, 24.
20.
Planas, J., and Elices, M. (1988). “Size‐effect in concrete structures: Mathematical approximations and experimental validation.” J. Mazars and Z. P. Bažant, eds., Elsevier Applied Science, Amsterdam, the Netherlands, 253–265.
21.
Roelfstra, P. E., Sadouki, H., and Wittmann, F. H. (1985). “Numerical concrete.” Mater. Struct., 18, 327–335.
22.
Saouma, V. E., Broz, J. J., Brühwiler, E., and Boggs H. L. (1991). “Effect of aggregate and specimen size on fracture properties of dam concrete.” J. Mater. in Civ. Engrg., Vol. 3, No. 3, Aug 1991, pp. 204–218.
23.
Shah, S. P., and Jenq, Y. S. (1985). “A two parameter fracture model for concrete.” J. Engrg. Mech., ASCE, 1227–1241.
24.
Timoshenko, S. P. (1983). “Two new sciences.” History of strength of materials. Dover Publications Inc., New York, N.Y. 11–13.
25.
William, K., Stankowski, T., Weihe, S., Runesson, K., and Sture, S. (1989). “Simulation issues of distributed and localized failure computations.” Cracking and damage—Strain localization and size effect, J. Mazars and Z. P. Bažant, eds., Elsevier Applied Science, Amsterdam, the Netherlands, 363–378.
26.
Zaitsev, Y. B., and Wittmann, F. H. (1981). “Simulation of crack propagation and failure of concrete.” Mater. Struct, 14, 357–364.
27.
Zubelwicz, A., and Bažant, Z. P. (1987). Interface element modeling of fracture in aggregate composites. J. Engrg. Mech., ASCE, 113(11), 1619–1630.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 3 • Issue 4 • November 1991
Pages: 235 - 251
Copyright
Copyright © 1991 ASCE.
History
Published online: Nov 1, 1991
Published in print: Nov 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.