Mechanical Behavior of Metallic Hollow Sphere Materials: Experimental Study
Publication: Journal of Aerospace Engineering
Volume 21, Issue 4
Abstract
Different from conventional metal foams, sintered metallic hollow sphere (MHS) material contains a certain volume fraction of enclosed pore space inside the spheres, as well as the interstitial porosity between the sintered neighbors, and this mixed open/closed-cell characteristic offers low density, high stiffness, and good energy absorption capacity. It is a new type of prospective light weight material for automotive and aerospace industry. In this study, the mechanical properties, especially the dynamic behaviors of the MHS materials are examined experimentally. Basic geometrical measurements reveal that the two types of MHS specimens we used were composed of randomly packed hollow spheres with uniform outer radius (0.9 and ) and wall thickness (relative density ). A very long, plateau length (up to 67% nominal strain) with almost constant stress was found in quasi-static tests, indicating that they are appropriate for energy absorption applications. Dynamic tests were performed by using a modified split Hopkinson pressure bar (SHPB), and significant dynamic strength enhancements were observed. Moreover, based on the experimental observations the relevant collapse and dynamic enhancement mechanisms are discussed, whereas the localization phenomena in dynamic crushing process were revealed by using the particle image velocimetry correlation method.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This study is a part of a project supported by the Hong Kong Research Grant Council (RGC) under Grant No. HKUST 6079/00E. A grant under the France/HK Joint Research Scheme (F-HK16/02T-11) made the collaboration between two institutions possible. The Fraunhofer Institute IFAM supplied the MHS materials. All this support is gratefully acknowledged.
References
Andrews, E. W., Gioux, G., Onck, P., and Gibson, L. J. (2001). “Size effects in ductile cellular solids. II: Experimental results.” Int. J. Mech. Sci., 43(3), 701–713.
Calladine, C. R., and English, R. W. (1984). “Strain-rate and inertia effects in the collapse of two types of energy-absorbing structure.” Int. J. Mech. Sci., 26, 689–701.
Gao, Z. Y., Yu, T. X., and Karagiozova, D. (2007). “Finite element simulation on the mechanical properties of MHS materials.” Acta Mech. Sin., 23(1), 65–75.
Gao, Z. Y., Yu, T. X., and Lu, G. X. (2005). “A study on type II structures. II: Dynamic response of a chain of prebent plates.” Int. J. Impact Eng., 31(7), 911–926.
Gasser, S., Paun, F., and Bréchet, Y. (2004). “Finite elements computation for the elastic properties of a regular stacking of hollow spheres.” Mater. Sci. Eng., A, 379(1), 240–244.
Gibson, L. J., and Ashby, M. F. (1997). Cellular solids: Structure and properties, 2nd Ed., Cambridge University Press, Cambridge, U.K.
Karagiozova, D., Yu, T. X., and Gao, Z. Y. (2006). “Modeling of MHS cellular solid in large strains.” Int. J. Mech. Sci., 48(11), 1273–1286.
Karagiozova, D., Yu, T. X., and Gao, Z. Y. (2007). “Stress-strain relationship for metal hollow sphere materials as a function of their relative density.” J. Appl. Mech., 74(5), 898–907.
Kolsky, H. (1949). “An investigation of mechanical properties of materials at very high rates of loading.” Proc. Phys. Soc. London, Sect. B, 62(11), 676–700.
Lim, T. J., Smith, B., and McDowell, D. L. (2002). “Behavior of a random hollow sphere metal foam.” Acta Mater., 50(11), 2867–2879.
Morris, A., and Calladine, C. R. (1969). “The local strength of thin spherical shell loaded radially through a rigid boss.” Proc., 1st Int. Conf. on Pressure Vessel Technology, 35–44.
Sanders, W. S., and Gibson, L. J. (2003a). “Mechanics of BCC and FCC hollow-sphere foams.” Mater. Sci. Eng., A, 352(1), 150–161.
Sanders, W. S., and Gibson, L. J. (2003b). “Mechanics of hollow sphere foams.” Mater. Sci. Eng., A, 347(1), 70–85.
Stronge, W. J., and Yu, T. X. (1993) Dynamic models for structural plasticity, Springer, London.
Tan, P. J., Harrigan, J. J., and Reid, S. R. (2002). “Inertia effects in uniaxial dynamic compression of a closed cell aluminum alloy foam.” Mater. Sci. Technol., 18(5), 480–488.
Updike, D. P. (1972). “On the large deformation of a rigid plastic spherical shell compressed by a rigid plate.” J. Eng. Ind., 94, 949–955.
Waag, U., Stephani, G., Bretschneider, F., and Venghaus, H. (2002). “Mechanical and acoustical properties of highly porous materials based on metal hollow spheres.” Proc., 2002 World Congress on Powder Metallurgy & Particulate Materials, Part 7.
Yishimura, H. (2005). “Mechanical characteristics of metallic hollow sphere structure.” Trans. Jpn. Soc. Mech. Eng., Ser. A, 71(5), 796–802.
Zhao, H., and Gary, G. (1996). “On the use of SHPB techniques to determine the dynamic behavior of materials in the range of small strains.” Int. J. Solids Struct., 33(23), 3363–3375.
Zhao, H., Gary, G., and Klepaczko, J. R. (1997). “On the use of a viscoelastic split Hopkinson pressure bar.” Int. J. Impact Eng., 19(4), 319–330.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Dec 1, 2006
Accepted: Nov 29, 2007
Published online: Oct 1, 2008
Published in print: Oct 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.