Nanoscale Weibull Statistics for Nanofibers and Nanotubes
Publication: Journal of Aerospace Engineering
Volume 20, Issue 2
Abstract
In this paper a modification of the classical Weibull statistics is applied to nanostructures. A comparison is presented of “nanoscale” versus classical Weibull statistics in treating recent experimental results on the fracture strength of C nanofibers and nanotubes, and nanotubes. “Nanoscale” Weibull moduli of 3.8 for electrospun and then heat-treated carbon nanofibers, 2.7 for arc-discharge synthesized multiwalled carbon nanotubes, 1.8 for chemical vapor deposited multiwalled carbon nanotubes, and 3.0 for multiwalled nanotubes, are deduced.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers appreciate support from the MIUR and NASA University Research, Engineering and Technology Institute on Bio Inspired Materials (BIMat) under Award No. NASANCC-1-02037.
References
Bagdahn, J., and Sharpe, W. N. (2003). “Fracture strength of polysilicon at stress-concentration.” J. Microelectromech. Syst., 12, 302–312.
Barber, A. H., Kaplan-Ashiri, I., Cohen, S. R., Tenne, R., and Wagner, H. D. (2005). “Stochastic strength of nanotubes: An appraisal of available data.” Compos. Sci. Technol., 65, 2380–2385.
Carpinteri, A., and Pugno, N. M. (2005). “Are the scaling laws on strength of solids related to mechanics or to geometry?” Nat. Mater., 4, 421–423.
Griffith, A. A. (1920). “The phenomenon of rupture and flow in solids.” Philos. Trans. R. Soc. London, Ser. A, 221, 163–198.
Johnson, C. A. (1983). “Fracture statistics of multiple flaw distribution.” Fract. Mech. Ceram., 5, 365–385.
Pugno, N. M., and Ruoff, R. S. (2004). “Quantized fracture mechanics.” Philos. Mag., 84, 2829–2845.
Pugno, N. M., and Ruoff, R. S. (2006). “Nanoscale Weibull statistics.” J. Appl. Phys., 99, 024301-4.
Weibull, W. (1951). “A statistical distribution function of wide applicability.” J. Appl. Mech., 18, 293–297.
Yu, M.-F., Dyer, M. J., Skidmore, G. D., Rohrs, H. W., Lu, X. K., Ausman, K. D., Von Ehr, J. R., and Ruoff, R. S. (1999). “Three-dimensional manipulation of carbon nanotubes under a scanning electron microscope.” Nanotechnology, 10, 244–252.
Yu, M.-F., Lourie, O., Dyer, M. J., Moloni, K., Kelly, T. F., and Ruoff, R. S. (2000). “Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load.” Science, 287, 637–640.
Zussman, E., Chen, X., Ding, W., Calabri, L., Dikin, D. A., Quintana, J. P., and Ruoff, R. S. (2005). “Mechanical and structural characterization of electrospun PAN-derived carbon nanofibers.” Carbon, 43, 2175–2185.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jan 10, 2005
Accepted: Sep 1, 2005
Published online: Apr 1, 2007
Published in print: Apr 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.