Effect of Surface Properties on Wrinkling of Ultrathin Films
Publication: Journal of Aerospace Engineering
Volume 20, Issue 1
Abstract
Thin films bonded to compliant substrates often develop wrinkles when subjected to an applied or inherent compressive stress. This paper presents a bilayer model to account for surface effects on the wrinkling of ultrathin solid films. Assuming a surface layer of finite thickness, effects of surface properties on the critical strain, the equilibrium wavelength, and the wrinkle amplitude are discussed in comparison with conventional analysis. We apply this model to explain experimental observations of wrinkling in thin polymer films. The measured wrinkle wavelengths and amplitudes deviate from conventional analysis for ultrathin films with thickness less than . The bilayer model provides a consistent understanding of the observed deviations, based on which a set of material properties for the surface and the bulk of the polymer films are deduced from the experimental data.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The first writer is grateful for the support by the NSF through Grant No. NSFCMS-0547409 and by the Texas Advance Technology Program. The second and third writers gratefully acknowledge the NIST National Research Council Postdoctoral Fellowship Program.
References
Allen, H. G. (1969). Analysis and design of structural sandwich panels, Pergamon, New York.
Cahn, J. W. (1980). “Surface stress and the chemical-equilibrium of small crystals. I: The case of the isotropic surface.” Acta Metall., 28(10), 1333–1338.
Cammarata, R. C. (1994). “Surface and interface stress effects in thin-films.” Prog. Surf. Sci., 46(1), 1–38.
Efimenko, K., Rackaitis, M., Manias, E., Vaziri, A., Mahadevan, L., and Genzer, J. (2005). “Nested self-similar wrinkling patterns in skins.” Nat. Mater., 4(4), 293–297.
Freund, L. B. (1998). “A surface chemical potential for elastic solids.” J. Mech. Phys. Solids, 46(10), 1835–1844.
Fried, J. R. (1995). Polymer science and technology, Prentice-Hall, Englewood Cliffs, N.J.
Gibbs, J. W. (1878). The scientific papers of J. Willard Gibbs, Vol. 1, Ox Bow, Woodbridge, Conn., 314–315 [Trans. Conn. Acad. III, 343, reprinted in 1993].
Groenewold, J. (2001). “Wrinkling of plates coupled with soft elastic media.” Physica A, 298(1–2), 32–45.
Harris, A. K., Wild, P., and Stopak, D. (1980). “Silicone rubber substrata: A new wrinkle in the study of cell locomotion.” Science, 208(4440), 177–179.
Harrison, C., Stafford, C. M., Zhang, W., and Karim, A. (2004). “Sinusoidal phase grating created by a tunably buckled surface.” Appl. Phys. Lett., 85(18), 4016–4018.
Huang, R. (2005). “Kinetic wrinkling of an elastic film on a viscoelastic substrate.” J. Mech. Phys. Solids, 53(1), 63–89.
Huang, R., and Suo, Z. (2003). “Very thin solid-on-liquid structures: The interplay of flexural rigidity, membrane force, and interfacial force.” Thin Solid Films, 429(1–2), 273–281.
Huang, Z. Y., Hong, W., and Suo, Z. (2005). “Nonlinear analysis of wrinkles in films on soft elastic substrates.” J. Mech. Phys. Solids, 53(9), 2101–2118.
Hutchinson, J. W., and Suo, Z. (1992). “Mixed-mode cracking in layered materials.” Adv. Appl. Mech., 29, 63–191.
Iacopi, F., Brongersma, S. H., and Maex, K. (2003). “Compressive stress relaxation through buckling of a low-k polymer-thin cap layer system.” Appl. Phys. Lett., 82(9), 1380–1382.
Ibach, H. (1997). “The role of surface stress in reconstruction, epitaxial growth, and stabilization of mesoscopic structures.” Surf. Sci. Rep., 29(5–6), 195–263.
Im, S. H., and Huang, R. (2004). “Ratcheting-induced wrinkling of an elastic film on a metal layer under cyclic temperatures.” Acta Mater., 52(12), 3707–3719.
Lacour, S. P., Wagner, S., Huang, Z. Y., and Suo, Z. (2003). “Stretchable gold conductors on elastomeric substrates.” Appl. Phys. Lett., 82(15), 2404–2406.
Mansfield, K. F., and Theodorou, D. N. (1991). “Molecular dynamics simulation of a glassy polymer surface.” Macromolecules, 24(23), 6283–6294.
Ortiz, M., and Gioia, G. (1997). “Delamination of compressed thin films.” Adv. Appl. Mech. 33, 119–192.
Rice, J. R., and Chuang, T. J. (1981). “Energy variations in diffusive cavity growth.” J. Am. Ceram. Soc., 64(1), 46–53.
Spaepen, F. (1996). “Substrate curvature resulting from the capillary forces of a liquid drop.” J. Mech. Phys. Solids, 44(5), 675–681.
Stafford, C. M., et al. (2004). “A buckling-based metrology for measuring the elastic moduli of polymeric thin films.” Nat. Mater., 3(8), 545–550.
Stafford, C. M., Guo, S., Chiang, M. Y. M., and Harrison, C. (2005). “Combinatorial and high-throughput measurements of thin film modulus.” Rev. Sci. Instrum., 76(6), 062207.
Stafford, C. M., Vogt, B. D., Harrison, C., Julthongpiput, D., and Huang, R. (2006). “Elastic moduli of ultrathin amorphous polymer films.” Macromolecules, 39(15), 5095–5099.
Sun, L., Dutcher, J. R., Giovannini, L., Nizzoli, F., Stephens, J. R., and Ord, J. L. (1994). “Elastic and elasto-optic properties of thin-films of poly(styrene) spin-coated onto .” J. Appl. Phys., 75(11), 7482–7488.
Watanabe, M., Shirai, H., and Hirai, T. (2002). “Wrinkled polypyrrole electrode for electroactive polymer actuators.” J. Appl. Phys., 92(8), 4631–4637.
Yin, H., et al. (2003). “Buckling suppression of islands on compliant substrates.” J. Appl. Phys., 94(10), 6875–6888.
Zhao, J. H., Kiene, M., Hu, C., and Ho, P. S. (2000). “Thermal stress and glass transition of ultrathin polystyrene films.” Appl. Phys. Lett., 77(18), 2843–2845.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Aug 26, 2005
Accepted: Feb 22, 2006
Published online: Jan 1, 2007
Published in print: Jan 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.