Comparative Behavior of Single-Bolted and Dual-Bolted Lap Joints
Publication: Journal of Aerospace Engineering
Volume 15, Issue 2
Abstract
Nonlinear finite-element models that predict the load-elongation behavior of single- and dual-bolted conical-head bolted lap joints are developed, and the load-elongation predictions are compared with experimental test data. The study is conducted for several panel thicknesses with a 4.8 mm size fastener and 2024-T3 clad aluminum alloy panels. The model load-elongation predictions are in excellent agreement with experimental test data. The results show that (1) dual-bolted lap joint test results underpredict the strength of single-bolted lap joints; and (2) numerical models may reliably predict the load-elongation behavior of mechanically fastened lap joints at a fraction of the cost and time of experimental testing.
Get full access to this article
View all available purchase options and get full access to this article.
References
Christon, M. A., and Dovey, D. (1992). “Ingrid: A 3-D mesh generator for modeling nonlinear systems—User’s manual.” Rep. No. UCRL-MA-109790-Draft, Lawrence Livermore National Laboratory, Livermore, Calif.
Dieter, G. E. (1986). “Mechanical metallurgy.” McGraw-Hill series in materials science and engineering. McGraw-Hill, New York.
Fung, C. P., and Smart, J.(1994). “An experimental and numerical analysis of riveted single lap joints.” ASCE, J. Aerosp. Eng., 208, 79–90.
Harish, G., and Farris, T. N. (1997). “Modeling of skin/rivet contact: Application to fretting fatigue.” Proc., 38th AIAA/ASME/ASCE Structures, Structural Dynamics and Materials Conf., AAIA Paper No. 97-1340, 4, 2761–2771.
Iyer, K., Hahn, G. T., Bastias, P. C., and Rubin, C. A. (1995b). “Analysis of fretting conditions in pinned connections.” J. Wear, 524–530.
Iyer, K., et al. (1995a). “Contribution of fretting to the fatigue and corrosion deterioration of a riveted lap joint.” Proc., Symposium on Structural Integrity in Aging Aircraft, ASME, New York.
Iyer, K. (1997). “Three-dimensional finite element analysis of the local mechanical behavior of riveted lap joints.” PhD thesis, Vanderbilt Univ., Nashville, Tenn.
Laursen, T. A., and Maker, B. N.(1975). “An augmented Lagrangian quasi-Newton solver for constrained nonlinear finite element applications.” Int. J. Numer. Methods Eng., 38, 3571–3590.
Maker, B. N. (1991). “NIKE3D: A nonlinear, implicit, three-dimensional finite element code for solid and structural mechanics—User’s manual.” Rep. No. UCRL-MA-105268, Lawrence Livermore National Laboratory, Livermore, Calif.
Muller, R. P. G. (1995). “An experimental and analytical investigation on the fatigue behavior of fuselage riveted lap joints.” PhD thesis, Delft Univ. of Technology, Delft, The Netherlands.
Pratt, J. D. (2001). “Testing and analysis of mechanically-fastened lap joints.” PhD thesis, Univ. of California, Irvine, Calif.
Sherbourne, A. N., and Bahaari, M. R.(1994). “3D simulation of end-plate bolted connections.” J. Struct. Eng., 120(11), 3122–3136.
Spelce, T. (1991). “Taurus: An interactive post-processor for the analysis codes NIKE3D, DYNA3D, and TOPAZ3D—User’s manual.” Rep. No. UCRL-MA-105401, Lawrence Livermore National Laboratory, Livermore, Calif.
Swensen, D. V., Gondhalekar, S. R., and Dawicke, D. S. (1993). “Analytical developments in support of the NASA aging aircraft program with an application to crack growth from rivets.” SAE General, Corporate and Regional Aviation Meeting and Exp., Society of Automotive Engineers, Wichita, Kans.
Information & Authors
Information
Published In
Copyright
Copyright © 2002 American Society of Civil Engineers.
History
Received: Mar 20, 2001
Accepted: Nov 9, 2001
Published online: Apr 1, 2002
Published in print: Apr 2002
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.