Buckling of Skew Plates with Continuity or Rotational Edge Restraint
Publication: Journal of Aerospace Engineering
Volume 14, Issue 3
Abstract
Buckling strength predictions are presented for a wide range of thin isotropic skew plates. The key studied parameters include the aspect ratio, skew angle, and rotational restraint stiffness on the different edges of the plate. The buckling strengths are evaluated both for isolated plates and for plates that are continuous with other parts of the structure. The assumed loading is uniform, uniaxial compression. The buckling predictions are presented in the form of dimensionless buckling curves, which permit a ready adoption into the “data sheets” commonly used in current design. The buckling predictions demonstrate the effect of introducing symmetrical combinations of elastic restraints against rotation on the edges of isolated skew plates. Further, they are presented in a manner that allows the benefits of continuity over skew bays to be evaluated. The curves also illustrate the complex character of the buckling mode changes that take place with a change in aspect ratio in skew plate structures. In addition, these mode changes lead to well defined local optima, which the designer can exploit if he has control over the aspect ratio of a skew plate.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ABAQUS/Standard, Version 5.8. (1998). Hibbit, Karlsson and Sorensen, Inc.
2.
Anderson, M. S., Stroud, W. J., Durling, B. J., and Hennessy, K. W. ( 1981). “PASCO: Structural panel analysis and sizing code, user's manual.” NASA TM 80182, National Aeronautics and Space Administration, Washington, D.C.
3.
Anderson, R. A. ( 1951). “Charts giving critical compressive stress of continuous flat sheet divided into parallelogram-shaped panels.” NACA TN 2392, National Advisory Committee for Aeronautics, Washington, D.C.
4.
Anderson, R. A., and Semonian, J. W. ( 1954). “Charts relating the compressive buckling stress of longitudinally supported plates to the effective deflectional and rotational stiffness of the supports.” NACA TN 1202, National Advisory Committee for Aeronautics, Washington, D.C.
5.
Argyris, J. H. ( 1966). “Continua and discontinua (an apercu of recent developments of the matrix displacement method).” Matrix Methods in Struct. Mech., 11–190.
6.
Ashton, J. E. ( 1969). “Stability of clamped skew plates under combined loads.” J. Appl. Mech., 36(1), 139–140.
7.
Batdorf, S. B., Stein, M., and Libove, C. ( 1946). “Critical combinations of longitudinal and transverse direct stress for an infinitely long flat plate with edges elastically restrained against rotation.” NACA ARR L6A05a, National Advisory Committee on Aeronautics, Washington, D.C.
8.
Budiansky, B., and Hu, P. C. ( 1946). “The Lagrangian multiplier method of finding upper and lower limits to critical stresses of clamped plates.” NACA TN 1103, National Advisory Committee on Aeronautics, Washington, D.C.
9.
Durvasula, S. ( 1970). “Buckling of clamped skew plates.” AIAA J., 8(1), 178–181.
10.
Durvasula, S. (1971). “Buckling of simply supported skew plates.”J. Engrg. Mech., ASCE, 97(3), 967–979.
11.
ESDU. ( 1957a). “Buckling stress coefficients for flat parallelogram plates under uniform compression (all edges fixed against rotation).” Engineering Sciences Data Unit 02.01.46. (Reprinted February 1969).
12.
ESDU. ( 1957b). “Buckling stress coefficients for parallelogram shaped panels in continuous flat sheet under uniform compression.” Engineering Sciences Data Unit 02.01.47. (Reprinted with Amendment A, April 1984).
13.
Fried, I., and Schmitt, K. ( 1972). “Numerical results from the application of gradient iterative techniques to the finite element vibration and stability analysis of skew plates.” Aeronautical J., 76, 166–169.
14.
Guest, J. ( 1951). “The buckling of uniformly compressed parallelogram plates having all edges clamped.” ARL-SM-172, Aeronautical Research Laboratory, Australia
15.
Guest, J. ( 1952). “The compressive buckling of a parallelogram plate simply supported along all four edges.” ARL-SM-199,
16.
Jaunky, N., Knight Jr., N. F., and Ambur, D. R. ( 1995). “Buckling of arbitrary quadrilateral anisotropic plates.” AIAA J., 33(5), 938–944.
17.
Kennedy, J. B., and Prabhakara, M. K. ( 1978). “Buckling of simply supported orthotropic skew plates.” Aeronautical Quarterly, 29, 161–172.
18.
Lundquist, E. E., and Stowell, E. Z. ( 1942). “Critical compressive stress for flat rectangular plates supported along all edges and elastically restrained against rotation along the unloaded edges.” NACA TR 733, National Advisory Committee on Aeronautics, Washington, D.C.
19.
Lundquist, E. E., Stowell, E. Z., and Schuette, E. H. ( 1943). “Principles of moment distribution applied to stability of structures composed of bars and plates.” NACA ARR 3K06, National Advisory Committee on Aeronautics, Washington, D.C.
20.
Mizusawa, T., and Kajita, T. ( 1986). “Vibration and buckling of skew plates with edges elastically restrained against rotation.” Comput. and Struct., 22(6), 987–994.
21.
Mizusawa, T., Kajita, T., and Naruoka, M. ( 1980a). “Analysis of skew plate problems with various constraints.” J. Sound Vibration, 73(4), 575–584.
22.
Mizusawa, T., Kajita, T., and Naruoka, M. ( 1980b). “Buckling of skew plate structures using B-spline functions.” Numer. Methods Engrg., 15, 87–96.
23.
Mizusawa, T., and Leonard, J. W. ( 1990). “Vibration and buckling of plates with mixed boundary conditions.” Engrg. Struct., 12, 285–290.
24.
Morely, L. S. D. ( 1963). Skew plates and structures, Pergamon, Oxford, U.K.
25.
Timoshenko, S. P. ( 1961). Theory of elastic stability, Engineering Societies Monograph, McGraw-Hill, New York.
26.
Williams, F. W., Anderson, M. S., Kennedy, D., Butler, R., and Aston, G. ( 1990). “User manual for VICONOPT: An exact analysis and optimum design program covering the buckling and vibration of prismatic assemblies of flat in-plane loaded, anisotropic plates, with approximations for discrete supports, and transverse stiffeners.” NASA CR 181966, National Aeronautics and Space Administration, Washington, D.C.
27.
Wittrick, W. H. ( 1953). “Buckling of oblique plates with clamped edges under uniform compression.” Aeronautical Quarterly, 4, 151–163.
28.
Wittrick, W. H. ( 1954). “Buckling of oblique plates with clamped edges under uniform shear.” Aeronautical Quarterly, 5, 39–51.
29.
Wang, C. M., Liew, K. M., and Alwis, W. A. M. (1992). “Buckling of skew plates and corner condition for simply supported edges.”J. Engrg. Mech., ASCE, 118(4), 651–662.
30.
Xiang, Y., Wang, C. M., and Kitipornchai, S. ( 1994). “Shear buckling of simply supported skew Mindlin plates.” AIAA J., 33(2), 377–378.
31.
York, C. B. ( 1996). “Influence of continuity and aspect ratio on the buckling of skew plates and plate assemblies.” Int. J. Solids and Struct., 33(15), 2133–2159.
32.
York, C. B. ( 2000). “Elastic buckling design curves for isotropic rectangular plates with continuity or rotational edge restraint.” Aeronautical J., 104(1034), 175–182.
33.
York, C. B., and Williams, F. W. ( 1994). “Theory and buckling results for infinitely wide stiffened skew plate assemblies.” Compos. Struct., 28, 189–200.
34.
York, C. B., Williams, F. W., Kennedy, D., and Butler, R. ( 1993). “A parametric study of optimum designs for benchmark stiffened wing panel.” Compos. Engrg., 3(7-8), 619–632.
35.
Yoshimura, Y., and Iwata, K. ( 1963). “Buckling of simply supported oblique plates.” J. Appl. Mech., 30(2), 363–366.
Information & Authors
Information
Published In
History
Received: Apr 24, 2000
Published online: Jul 1, 2001
Published in print: Jul 2001
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.