Load‐Deflection Behavior of Space‐Based Inflatable Fabric Beams
Publication: Journal of Aerospace Engineering
Volume 7, Issue 2
Abstract
The use of inflatable structures has often been proposed for aerospace applications. The advantages of such structures include low launch weight and easy assembly. To consider using inflated fabric beams in aerospace applications, an accurate and efficient method of structural analysis must be developed. This paper develops a method of analysis for inflated fabric beams that is analogous to the shear‐moment method. The bending model is developed from basic assumptions about the state of stress in the fabric of the inflated beam. The resulting model shows that the bending behavior of inflatable fabric beams is identical to conventional solid elastic beams as long as the beam fabric remains unwrinkled. Experimental data were obtained and verify the static bending model for beams with length/diameter ratios greater than 10.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Authier, B., and Hill, L. (1985). “Large inflatable parabolic reflectors in space.” Instrumentation for Submillimeter Spectroscopy, 598, 126–132.
2.
Bernasconi, M. C., and Reibaldi, G. G. (1986). “Inflatable, space‐rigidized structures: overview of applications and their technology impact.” Acta Astronautica, Vol. 14, 455–465.
3.
Bulson, P. S. (1973). “Design principles of pneumatic structures.” The Struct. Engr., 51(6), 209–215.
4.
Comer, R. L., and Levy, S. (1963). “Deflections of an inflated circular‐cylindrical cantilever beam.” AIAA J., 1(7), 1652–1655.
5.
Douglas, W. J. (1969). “Bending stiffness of an inflated cylindrical cantilever beam.” AIAA J., 7(7), 1248–1253.
6.
French, R. J. (1966). “A feasibility investigation of expandable structures module for orbital experiment—artificial G.” Goodyear Aerosp. Rep.; NTIS N67‐30000, Washington, D.C.
7.
Girard, L., Bloetscher, F., and Stimler, F. (1982). “Innovative structures for space applications.” Goodyear Aerosp. Rep. GAC 19‐1563; NTIS N84‐25757, Washington, D.C.
8.
Grossman, G., and Williams, G. (1989). “Inflatable concentrators for solar propulsion and dynamic space power.” Solar Engrg.—1989; Proc., 11th Annu. ASME Solar Energy Conf., American Society of Mechanical Engineers, New York, N.Y.
9.
Kaden, R. A., and Pense, L. D. (1988). “Planetary base inflatable form construction.” Engrg., Constr., and Operations in Space; Proc., Space 88, ASCE, New York, N.Y.
10.
Leonard, J. W. (1974). “State‐of‐the‐art in inflatable shell research.” J. Engrg. Mech. Div., ASCE, 100(1), 17–25.
11.
Leonard, R. W., Brooks, G. W., and McComb, H. G. Jr. (1960). “Structural Considerations of inflatable reentry vehicles.” NASA Tech. Note D‐457, Langley Res. Ctr., Langley Field, Va.
12.
Manning, L., and Jurich, L. (1972). “Expandable airlock experiment (DO21) and the skylab mission.” Goodyear Aerosp. Rep.; NTIS N73‐15896, Washington, D.C.
13.
Mikulas, M. M., and Hedgepeth, J. M. (1989). “Structural concepts for very large (400‐meter‐diameter) solar concentrators.” 2nd Beamed Space‐Power Workshop Proc., NASA Workshop at Langley Res. Ctr.; NTIS N90‐10153, Washington, D.C.
14.
Ohkami, Y., Matsumoto, K., Kida, T., Ilda, T., and Sakai, J. (1986). “An enclosed hangar concept for large spacecraft servicing at space station.” Proc., 15th Int. Symp. Space Tech. and Sci., Agni Publishing, Tokyo, Japan.
15.
Otto, F. (1962). Tensile structures. MIT Press, Cambridge, MA, 86–87.
16.
Reibaldi, G. G. (1985). “Inflatable technology in orbit demonstration within the European space agency programs.” Proc., 25th Int. Conf. on Space, Rome, Italy, 199–205.
17.
Steeves, E. C. (1975). “A linear analysis of the deformation of pressure stabilized tubes.” U.S. Army Natick Lab. Rep. AD/A‐006‐493; NTIS N75‐32513, Washington, D.C.
18.
Topping, A. D. (1964). “Shear deflections and buckling characteristics of inflated members.” J. Aircraft, 1(5), 289–293.
19.
Tynan, C. W. Jr. (1965). “Lunar stay time extension module.” Selected Papers on Environmental and Attitude Control of Manned Spacecraft; NTIS N67‐14250, Washington, D.C.
20.
Webber, J. P. H. (1982). “Deflections of inflated cylindrical cantilever beams subjected to bending and torsion.” Aeronautical J., 86(858), 306–312.
21.
Williams, G. (1988). “Inflatable antennas for microwave power transmission.” Free‐Space Power Transmission; Proc., NASA Workshop at Lewis Res. Ctr.; NTIS N90‐21799, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Oct 15, 1992
Published online: Apr 1, 1994
Published in print: Apr 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.