Evaluation of Full-Depth Asphalt Pavement Construction Using X-Ray Computed Tomography and Ground Penetrating Radar
Publication: Journal of Performance of Constructed Facilities
Volume 22, Issue 6
Abstract
In the past few years, a number of full-depth or perpetual pavements have been designed and constructed in the State of Texas. A study was conducted to examine the quality of the compaction of the thick asphalt layers within these pavements using advanced forensic tools such as X-ray computed tomography (X-ray CT) and ground penetrating radar (GPR). The GPR is a nondestructive tool for evaluating the uniformity of density in pavements at highway speed. X-ray CT is a laboratory tool that is used to conduct detailed analysis of air void distribution and uniformity in asphalt pavement cores. This paper presents the results of analyzing one of the perpetual pavements constructed in State Highway 114 (SH-114). In this project, two different structural asphalt pavement sections were placed, one included a (25.4 mm) stone filled (SF) Superpave mix and the other included a traditional dense graded Type B material. The dense graded Type B material was found to be uniformly compacted. However, major compaction problems were identified with the coarse SF Superpave mix. The poor compaction and associated high percent air vsoids were found to permit moisture infiltration, which could potentially lead to rapid pavement deterioration. The analysis showed very good agreement between the GPR and X-ray CT results and demonstrated the efficiency of using GPR and X-ray CT in the evaluation of asphalt pavement compaction.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Omari, A., and Masad, E. (2004). “Three dimensional simulation of fluid flow in x-ray CT images of porous media.” Int. J. Numer. Analyt. Meth. Geomech., 28(13), 1327–1360.
Aylmore, L. A., and Hainsworth, J. M. (1983). “The use of computer assisted tomography to determine spatial distribution of soil water content.” Austral. J. Soil Res., 21(4), 435–443.
Braz, D., Da Motta, L. M. G., and Lopes, R. T. (1999a). “Computed tomography in the fatigue test analysis of an asphaltic mixtures.” Appl. Radiat. Isot., 50(4), 661–671.
Braz, D., Lopes, R. T., and Da Motta, L. M. G. (1999b). “Analysis of the percentage voids of test and field specimens using computerized tomography.” Nucl. Instrum. Methods Phys. Res. A, 422(1), 942–948.
Masad, E. (2004). “X-ray computed tomography of aggregates and asphalt mixes.” Mater. Eval., 62(7), 775–783.
Masad, E., Jandhyala, V. K., Dasgupta, N., Somadavan, N., and Shashidhar, N. (2002). “Characterization of air void distribution in asphalt mixes using x-ray computed tomography.” J. Mater. Civ. Eng., 14(2), 122–129.
Masad, E., Muhunthan, B., Shashidhar, N., and Herman, T. (1999). “Internal structure characterization of asphalt concrete using image analysis.” J. Comput. Civ. Eng., 13(2), 88–95.
Newcomb, D. E., Buncher, M., and Huddleston, I. J. (2001). “Concepts of perpetual pavements.” Transportation Research Circular on Perpetual Bituminous Pavements, Transportation Research Board, Washington, D.C., 4–11.
Petrovic, A. M., Siebert, J. E., and Rieke, P. E. (1982). “Soil bulk density analysis in three dimensions by computed tomography scanning.” Soil Sci. Soc. Am. J., 46(3), 445–450.
Scullion, T. (2006). “Perpetual pavements in Texas: The state of the practice.” 4822-1, Texas Transportation Institute, College Station, Tex.
Scullion, T., and Chen, Y. (1999). COLORMAP version 2, user’s manual with help menus, Texas Transportation Institute, College Station, Tex., 1702–1704.
Shashidhar, N. (1999). “X-ray tomography of asphalt concrete.” Transportation Research Record. 1681, Transportation Research Board, Washington, D.C., 186–192.
Tashman, L., Masad, E., D’Angelo, J., Bukowski, J., and Harman, T. (2002). “X-ray tomography to characterizing air void distribution in Superpave gyratory compacted specimens.” Int. J. Pavement Eng., 3(1), 19–28.
Tashman, L., Masad, E., Little, D., and Lytton, R. (2004). “Damage evolution in triaxial compression tests of HMA at high temperatures.” J. Assoc. Asph. Paving Technol., 73, 53–81.
Texas Department of Transportation (TxDOT). (2001). “Memorandum on full-depth asphalt pavements, flexible pavement design task force implementation.” Austin, Tex.
Walubita, L., and Scullion, T. (2007). “Perpetual pavements in Texas: The Fort Worth SH 114 Project in Wise County.” 4822-2F, Texas Transportation Institute, College Station, Tex.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: May 25, 2007
Accepted: Oct 2, 2007
Published online: Dec 1, 2008
Published in print: Dec 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.