Causes of Collapse and Damage to Low-Rise RC Buildings in Recent Turkish Earthquakes
Publication: Journal of Performance of Constructed Facilities
Volume 21, Issue 5
Abstract
This study assesses performance objectives defined in the Turkish Earthquake Code (TEC) in order to make a realistic evaluation related to heavy damage and collapse reasons of reinforced concrete (RC) buildings that experienced severe earthquakes in Turkey. A series of three-dimensional RC buildings with different characteristics and representing low-rise structures damaged and collapsed in the earthquake areas is designed according to Turkish codes (Turkish Design Standards and Turkish Earthquake Code). Pushover analyses are carried out to determine nonlinear behavior of the buildings under earthquake loads. Building performances are determined by using the displacement coefficients method, which is a commonly used nonlinear static evaluation procedure for different seismic hazard levels defined in the TEC. The stipulated performance objectives in the TEC are checked in terms of plastic rotations and maximum story drift. From the results of this research, it can be concluded that low-rise RC buildings designed according to Turkish codes sufficiently provide for the performance objectives stipulated in the TEC. Reasons for the heavy damages and collapses of RC buildings during severe earthquakes are explained by commonly occurring themes (i.e., project errors, poor quality of construction, modifications of buildings, etc.).
Get full access to this article
View all available purchase options and get full access to this article.
References
Applied Technology Council (ATC). (1996). “Seismic evaluation and retrofit of concrete buildings.” ATC 40, Vol. 1, Washington, D.C.
Çelebi, M. (1998). “The Adana-Ceyhan earthquake of June 27, 1998.” Learning from Earthquakes, EERI Special Earthquake Rep., Earthquake Engineering Research Institute Newsletter, ⟨http://www.eeri.org/lfe/pdf/turkey_adana_ceyhan_eeri_preliminary_report.pdf⟩ (June 26, 2006).
Computer and Structures, Inc. (CSI). (2002). “Integrated finite element analysis and design of structures basic analysis reference manual.” SAP2000, Version 8, Berkeley, Calif.
Ellul, F., and D’ayala, D. (2003). “The Bingöl, Turkey Earthquake of the 1st of May 2003.” Field Report, Earthquake Engineering Field Investigation Team (EEFIT), Architectural and Civil Engineering Dept., Univ. of Bath, Bath, U.K.
Erdik, M. (2000). “Report on 1999 Kocaeli and Düzce (Turkey) earthquakes.” Dept. of Earthquake Engineering, Bogazici Univ., ⟨http://www.koeri.boun.edu.tr/depremmuh/eqspecials/kocaeli/Kocaelireport.pdf⟩ (June 26, 2006).
Erdik, M., Sesetyan, K., Demircioğlu, M. B., Celep, U., Biro, Y., and Uckan, E. (2002). “Sultandagi Earthquake—Turkey.” Dept. of Earthquake Engineering, Bogazici Univ., ⟨http://www.koeri.boun.edu.tr/depremmuh/eqspecials/sultandag/sultandageq.htm⟩ (June 26, 2006).
European Standard Norme. (2003). “Design of structures for earthquake resistance. I: General rules, seismic actions, and rules for buildings.” Eurocode-8, Brussels, Belgium.
Federal Emergency Management Agency (FEMA). (1997). “NEHRP guidelines for the seismic rehabilitation of buildings.” FEMA 273, Washington, D.C.
Federal Emergency Management Agency (FEMA). (2000). “Prestandard and commentary for the seismic rehabilitation of buildings.” FEMA 356, Washington, D.C.
Hanoğlu, K. B. (2002). “Fiber reinforced plastic overlay retrofit of hollow clay tile masonry infilled reinforced concrete frames.” Ph.D. thesis, Bogazici Univ., Istanbul, Turkey.
Hasgül, U. (2004). “Investigation of performances of reinforced concrete buildings designed according to the Turkish earthquake code.” MSc thesis, Balikesir Univ., Balikesir, Turkey.
International Code Council, Inc. (ICC). (2000). “International building code 2000.” UBC 2000, Falls Church, Va.
New Zealand Standard (NZS). (1984). “Code of practice for general structural design and design loadings for buildings.” NZS 4203, New Zealand Standards Association of New Zealand, Wellington, New Zealand.
Özcebe, G. (2002). “Structural damages and reasons observed in 3 February 2002 Afyon-Sultandağı earthquake.” Civil Engineering Dept., Middle East Technical Univ., Structural Engineering Research Unit, ⟨http://www.seru.metu.edu.tr/archives/databases/Afyon_Database/YAPISAL%20HASARLAR.pdf⟩ (Dec. 26, 2006) (in Turkish).
Özcebe, G., Ramirez, J., Wasti, S. T., and Aykut, A. (2004). “1 May 2003 Bingöl earthquake engineering report.” Rep. No. 2004/1, TÜBİTAK SERU Structural Engineering Research Unit, Ankara, Turkey.
Paulay, T., and Priestley, M. J. N. (1992). Seismic design of reinforced concrete and masonry buildings, Wiley, New York.
Poland, C. D., and Hom, D. B. (1997). “Opportunities and pitfalls of performance based seismic engineering.” Proc., Int. Workshop on Seismic Design Methodologies for the Next Generation of Codes, Bled, Slovenia, 69–78.
Scawthorn, C., and Johnson, G. S. (2000). “Preliminary report Kocaeli (Izmit) earthquake of 17 August 1999.” Eng. Struct., 22(7), 727–745.
Structural Engineers Association of California (SEAOC). (1995). “Performance based seismic engineering of buildings.” Vision 2000, Sacramento, Calif.
Structural Engineers Association of California (SEAOC). (1999). “Recommended lateral force requirements and commentary.” Blue Book, 7th Ed., Sacramento, Calif.
Sucuoğlu, H. (2000). “The 1999 Kocaeli and Düzce-Turkey earthquakes.” Middle East Technical University, ⟨http://www.metu.edu.tr/~wwweerc/guncel/koca-dzc.pdf⟩ (June 26, 2006).
Sucuoğlu, H., and Yazgan, U. (2003). “Seismic risk assessment survey of urban buildings.” The role of local governments in reducing the risk of disasters, World Bank Institute, Istanbul, 127–147.
Turkey, and U. S. Field Reconnaissance Team (Turkey and U.S. F.R.T.). (2004). “The 1 May 2003 Bingöl earthquake; summary of damage assessment to private and public buildings by a joint team of Turkey and USA.” 13th World Conf. on Earthquake Engineering, Vancouver, Canada, Paper No. 1450.
Turkish Earthquake Code (TEC). (1998). “The minister of public works and settlement.” TEC1998, Ankara, Turkey.
Turkish Standards Institution (TS). (2000). “Requirements for design and construction of reinforced concrete structures.” TS 500, Ankara, Turkey.
Uniform Building Code (UBC). (1997). “International conference of building officials.” UBC 97, Vol. 2, Whittier, Calif.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Jun 29, 2006
Accepted: Apr 10, 2007
Published online: Oct 1, 2007
Published in print: Oct 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.