Modeling the Impact of Failed Members for Progressive Collapse Analysis of Frame Structures
Publication: Journal of Performance of Constructed Facilities
Volume 20, Issue 4
Abstract
During the past decade, increasing attention has been focused on the design of buildings to resist progressive collapse. Previously, the authors presented a nonlinear solution procedure for progressive collapse analysis of planar frame structures. In the current study, a modeling strategy to account for the impact of failed members against other structural components is developed to extend the capabilities of the initial models. Assumptions made in approximating the effects of impact on the overall behavior of frame structures are discussed. An example illustrating the importance of accounting for the effects of impact on predicting progressive collapse is also given. Results indicate that the impact velocity plays the most significant role in causing failure of intact beam elements.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE. (2006). Minimum design loads for buildings and other structures, ASCE, Reston, Va.
Bathe, K. J. (1995). Finite element procedures, Prentice-Hall, Englewood Cliffs, N.J.
British Standards Institute (BSI). (1996). BS6399: Loading for buildings-Part 1, code of practice for dead and imposed loads, British Standards Institute, London.
British Standards Institute (BSI). (1997). BS8110: Structural use of concrete-Part 1, code of practice for design and construction, British Standards Institute, London.
Canadian Commission on Building and Fire Codes. (1995). National building code of Canada (NBC), Canada.
Computers and Structures, Inc. (2003). SAP2000 nonlinear 8.2.7, Computers and Structures, Inc., Berkeley, Calif.
Department of Defense (DoD). (2001). Interim antiterrorism/force protection construction standards—Progressive collapse design guidance, DoD, Washington, D.C.
Department of Defense (DoD). (2005). “Design of buildings to resist progressive collapse.” Unified Facilities Criteria: UFC 4-023-03, DoD, Washington, D.C.
Fintel, M., and Schultz, D. M. (1976). “Philosophy for structural integrity of large panel buildings.” J. Prestressed Concrete Inst., 21(3), 46–69.
Goldsmith, W. (1960). Impact: The theory and physical behaviour of colliding solids, Edward Arnold, London.
General Services Administration (GSA). (2003). Progressive collapse analysis and design guidelines for new federal office buildings and major modernization projects, GSA, Washington, D.C.
International Code Council (ICC). (2000). International building code, ICC.
Kaewkulchai, G., and Williamson, E. B. (2004). “Beam element formulation and solution procedure for dynamic progressive collapse analysis.” Comput. Struct., 82(7-8), 639–651.
Kaewkulchai, G. (2003). “Dynamic progressive collapse of frame structures.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Texas at Austin, Austin, Tex.
Lee, E. H. (1940). “Impact of a mass striking a beam.” J. Appl. Mech., 62, A129–A140.
McGuire, W. (1974). “Prevention of progressive collapse.” Proc., The Regional Conference on Tall Buildings, Asian Institute of Technology, Bangkok, Thailand.
Newmark, N. M. (1959). “A method of computation for structural dynamics.” J. Appl. Mech., 85, 67–94.
Stronge, W. J. (2000). Impact mechanics, Cambridge University Press, Cambridge, U.K.
Zukas, J. A., Nicholas, T., Swift, H. F., Greszczuk, L. B., and Curran, D. R. (1982). Impact dynamics, Wiley, New York.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Mar 7, 2006
Accepted: Apr 3, 2006
Published online: Nov 1, 2006
Published in print: Nov 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.