Constructability Related to TQM, Value Engineering, and Cost/Benefits
Publication: Journal of Performance of Constructed Facilities
Volume 8, Issue 1
Abstract
Recently, constructability has received considerable attention from researchers and practicing engineers. Constructability has been defined as the optimum use of construction knowledge and experience in planning, design, procurement, and field operations to achieve overall project objectives (“Constructability” 1986). This paper discusses the evolution of constructability and how programs have been developed to bring design and construction closer to the level of integration once achieved by the master builder. There is a great deal of discussion among industry professionals as to how constructability is related to total quality management and value engineering. This paper conceptually describes these interrelations. In addition, the paper presents a framework to measure costs and benefits related to constructability. By providing owners with this framework, the parameters will be visible and defined, thus removing skepticism as to the measurement process as well as enabling more consistent and uniform results to be obtained. Additionally, these standardized parameters may facilitate developing a means to measure company and industry performance.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Burati, J. L., Matthews, M. F., and Kalidindi, S. N. (1992). “Quality management organizations and techniques.” J. Constr. Engrg. Mgmt., ASCE, 118(1), 112–128.
2.
“Can your design be built?” (1986). Civ. Engrg., ASCE, 56(1), 49–51.
3.
“Constructability concepts file.” (1987). Publication 3‐3, Constr. Industry Inst., Univ. of Texas at Austin, Austin, Tex.
4.
“Constructability and constructability programs: White paper.” (1991). J. Constr. Engrg. Mgmt., ASCE, 117(1), 67–89.
5.
“Constructability implementation guide.” (1993). Publication 34‐1, Constr. Industry Inst., Univ. of Texas at Austin, Austin, Tex.
6.
“Constructability: A primer.” (1986). Publication 3‐1, Constr. Industry Inst., Univ. of Texas at Austin, Austin, Tex.
7.
Eldin, N. N. (1988). “Constructability improvement of project designs.” J. Constr. Engrg. Mgmt., ASCE, 114(4), 631–640.
8.
“Evaluation of design effectiveness.” (1986). Publication 8‐1, Constr. Industry Inst., Univ. of Texas at Austin, Austin, Tex.
9.
Fisher, D. J., and O'Connor, J. T. (1991). “Constructability for piping automation: Field operations.” J. Constr. Engrg. Mgmt., ASCE, 117(3), 468–485.
10.
Gugel, J. G. (1992). “Models for constructability approach selection and input‐source evaluation,” MS thesis, Univ. of Wisconsin, Madison, Wisc.
11.
“Guidelines for implementing a constructability program.” (1987). Publication 3‐2, Constr. Industry Inst., Univ. of Texas at Austin, Austin, Tex.
12.
Hugo, F., O'Connor, J. T., and Ward, W. V. (1990). “Highway constructability guide.” Research Project 3‐6‐88‐1149, The Ctr. for Transp. Res., Univ. of Texas at Austin, Austin, Tex.
13.
“Integrating construction resources and technology into engineering.” (1982). Report B‐1, The Business Rondtable, New York, N.Y.
14.
Juran, J. M. (1988). Juran of planning for quality. The Free Press, New York, N.Y.,
15.
Kano, N., and Koura, K. (1991). “Development of quality control seen through companies awarded the Deming Prize.” Reports of Statistical Application Research, JUSE, 37(1–2), 79–105.
16.
Kavanagh, T. C., Muller, F., and O'Brien, J. J. (1978). Construction management—A professional approach. McGraw Hill Book Co., New York, N.Y.
17.
Kirby, J. G., Furry, D. A., and Hicks, D. K. (1988). “Improvements in design review management.” J. Constr. Engrg. Mgmt., ASCE, 114(1), 69–82.
18.
Knisely, S (1992). “Improving project constructability.” Paper presented at CII Products for Project Management, Construction Industry Institute, University of Texas, Austin, Tex.
19.
“Manual for special project management.” (1991). Special Publication, Constr. Industry Inst., Univ. of Texas at Austin, Austin, Tex.
20.
Model plan for constructability. (1990). Houston Business Roundtable, Houston, Tex.
21.
O'Brien, J. J. (1976). Value analysis in design and construction. McGraw Hill, Inc., New York, N.Y.
22.
O'Connor, J. T., and Davis, V. S. (1988). “Constructability improvement during field operations.” J. Constr. Engrg. Mgmt., ASCE, 114(4), 548–564.
23.
O'Connor, J. T., and Hugo, F. (1989). “Highway project constructability.” Proc., Constructed Project Excellence, ASCE, New York, N.Y., 66–71.
24.
O'Connor, J. T., Hugo, F., and Stamm, E. M. (1991). “Improving highway specifications for constructability.” J. Constr. Engrg. Mgmt., ASCE, 117(2), 242–258.
25.
O'Connor, J. T., Larimore, M. A., and Tucker, R. L. (1986). “Collecting constructability improvement ideas.” J. Constr. Engrg. Mgmt., ASCE, 112(4), 463–475.
26.
O'Connor, J. T., Rusch, S. E., and Schulz, M. J. (1987). “Constructability concepts for engineering and procurement.” J. Constr. Engrg. Mgmt., ASCE, 113(2), 235–247.
27.
O'Connor, J. T., and Tucker, R. L. (1986). “Industrial project constructability improvement.” J. Constr. Engrg. Mgmt., ASCE, 112(1), 69–82.
28.
Radtke, M. W. (1992). “Model constructability implementation procedures.” MS thesis, Univ. of Wisconsin, Madison, Wisc.
29.
Rowings, J. E., and Kaspar, S. L. (1991). “Constructability of cable‐stayed bridges.” J. Constr. Engrg. Mgmt., ASCE, 117(2), 259–278.
30.
Russell, J. S., and Gugel, J. G. (1992). “A comparison of two corporate constructability programs.” J. Constr. Engrg. Mgmt., ASCE, 119(4), 769–784.
31.
Russell, J. S., Gugel, J. G., and Radtke, M. W. (1992a). “Benefits and costs of constructability: Four case studies.” Source Document 83, Constr. Industry Inst., Univ. of Texas at Austin, Austin, Tex.
32.
Russell, J. S., Radtke, M. W., and Gugel, J. G. (1992b). “Project‐level model and approaches to implement constructability.” Source Document 82, Constr. Industry Inst., Univ. of Texas at Austin, Austin, Tex.
33.
Snodgrass, T. J., and Kasi, M. (1986). Function analysis: The stepping stones to good value. Univ. of Wisconsin, Madison, Wisc., 1–3.
34.
Tatum, C. B. (1987a). “Improving constructability during conceptual planning.” J. Constr. Engrg. Mgmt., ASCE, 113(2), 191–207.
35.
Tatum, C. B. (1987b). “The project manager's role in integrating design and construction.” Project Mgmt. J., 18(2), 96–107.
36.
Tatum, C. B. (1989). “Management challenges of integrating construction methods and design approaches.” J. Mgmt. Engrg., ASCE, 5(2), 139–154.
37.
Tatum, C. B. (1990). “Integrating design and construction to improve project performance.” Project Mgmt. J., 21(2), 35–42.
38.
Tatum, C. B., Vanegas, J. A., and Williams, J. M. (1986). “Constructability improvement using prefabrication, preassembly, and modularization.” Tech. Report No. 297, Stanford Univ., Stanford, Calif.
39.
“Total quality management: The competitive edge.” (1990). Publication 10‐4, Constr. Industry Inst., Univ. of Texas at Austin, Austin, Tex.
40.
Turner, J. P. (1992). “Constructability for drilled shafts.” J. Constr. Engrg. Mgmt., ASCE, 118(1), 77–93.
41.
Vanegas, J. A. (1988). “A model for design/construction integration during the initial phases of design for building construction projects,” PhD thesis, Stanford Univ., Stanford, Calif.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Jan 28, 1993
Published online: Feb 1, 1994
Published in print: Feb 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.