Freezing Temperatures of Freely Falling Industrial Wastewater Droplets
Publication: Journal of Cold Regions Engineering
Volume 14, Issue 3
Abstract
Spray freezing technology has been used in ice building construction in cold regions and artificial snow making. The spray freezing process involves heat and mass transfer and ice nucleation. The freezing temperature of the sprayed water is influenced by many factors, such as droplet size (volume), ambient air temperature, and impurity content of the water. An experimental study was carried out to investigate the influence of the droplet size (volume) and the ambient air temperature on the ice nucleation temperature of the freely suspended droplets of different qualities—piggery wastewater, pulp mill effluent, and oil sands tailings pond water. The time required to initiate freezing in the freely suspended wastewater droplets was measured under various experimental conditions using video-image technology. The ice nucleation temperature of the droplets were predicted based on the required freezing time and the rate of heat and mass transfer.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Chen, J., and Kevorkian, V. (1971). “Heat and mass transfer in making artificial snow.” Ind. Engrg. Chem. Process Des. Dev., 10, 75–78.
2.
Chen, K. H., and Trezek, G. J. (1977). “The effect of heat transfer coefficient, local wet bulb temperature and drop size distribution function on the thermal performance of sprays.” J. Heat Transfer, 99, 381–385.
3.
Collins, J., and Masterson, D. M. (1989). “The state of the art in snowmaking and the application to arctic construction.” Proc., 8th Int. Conf. on Offshore Mech. and Arctic Engrg., American Society of Mechanical Engineers, New York.
4.
Gao, W. ( 1998). “Partial freezing by spraying as a treatment alternative of selected industrial wastes.” PhD dissertation, University of Alberta, Edmonton, Alta., Canada.
5.
Gao, W., Smith, D. W., and Sego, D. C. (1999). “Ice nucleation in industrial wastewater.” Cold Reg. Sci. and Technol., 29, 121–133.
6.
Gap, W., Smith, D. W., and Sego, D. C. (2000). “Freezing behavior of freely suspended wastewater droplets.” Cold Reg. Sci. and Technol., 31, 13–26.
7.
Instanes, A. ( 1993). “An experimental study of the mechanical behavior of spray ice.” Doctoral dissertation, Norwegian Institute of Technology, Norway.
8.
Liao, J. C., and Ng, K. C. (1990). “Effect of ice nuclators on snow making and spray freezing.” Ind. Engrg. Chem. Res., 29, 361—366.
9.
Ranz, W. E., and Marshall, W. R. (1952). “Evaporation from drops.” Chem. Engrg. Prog., 48, 141–148.
10.
Yao, S. C., and Schrock, V. E. (1975). “Heat and mass transfer from freely falling drops.” J. Heat Transfer, 98(1), 120–125.
11.
Zarling, J. P. (1980). “Head and mass transfer from freely falling drops at low temperature.” CRREL Rep. 80-18, U.S. Army Corps of Engineers, Hanover, N.H.
Information & Authors
Information
Published In
History
Received: Jan 18, 2000
Published online: Sep 1, 2000
Published in print: Sep 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.