Winter Operability: Equipment Problems and Their Remedies
Publication: Journal of Cold Regions Engineering
Volume 6, Issue 3
Abstract
Automotive and construction equipment manufactured for the American market is designed for temperate conditions and is seldom suitable for use at low temperatures without modifications of the lubrication schedule and starting procedures and the addition of heating units. With increased construction activities in cold regions many remedies for low‐temperature problems have been developed, and active research on new methods and improvements of existing techniques continues. Most of the recent research in this area has been in the areas of lubricants, plastics and elastomers, and heaters for the engine and other components. The recent development of synthetic hydrocarbon and silicone lubricants has greatly alleviated many difficult problems in the cold, and the current proliferation of plastics, elastomers, and composites has yielded many useful or promising materials for low‐temperature use. Electric immersion heaters and fuel‐fired units are commonly used for engine heating; research in the area of engine and equipment heating has resulted in the development of sophisticated programmable units as well as new devices using thermoelectric technology and latent‐heat storage.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Automotive handbook. (1986). 2nd ed., U. Adler, ed., Robert Bosch GmbH, Stuttgart, Germany.
2.
Brugada, R. (1989). “Performance of thermoplastic elastomers (TPEs) at subzero temperatures.” Subzero Engrg. Conditions Conf. Proc., SAE, Rovaniemi, Finland, 67–73.
3.
“Cold weather operation of Detroit diesel engines.” (1989). Engrg. Bulletin No. 38, Revision No. 5, Detroit Diesel, Detroit, Mich.
4.
CRC Handbook of Lubrication (Theory and Practice of Tribology). (1984). E. R. Booser, ed., CRC Press, Boca Raton, Fla.
5.
Cragee, C. S. (1955). “Properties of ethylene glycol and its aqueous solutions.” Natural Bureau of Standards Report 4268, U.S. Department of Commerce, Washington, D.C.
6.
Dowtherm J heat transfer fluid: Product technical data. (1990). Dow Chemical Co., Midland, Mich.
7.
Jacobson, M. M. (1964). “Materials engineering for cold regions and the brittle fracture problem.” Science in Alaska—Proc., 15th Alaskan Sci. Conf., American Association for the Advancement of Science, College, Alaska.
8.
Klamann, D. (1984). Lubricants and related products: Synthesis, properties, applications, international standards. Verlag Chemie, Deerfield Beach, Fla.
9.
Lange's handbook of chemistry. (1973). 11th Ed., J. A. Dean, ed., McGraw‐Hill Book Company, New York.
10.
“Latent heat storage.” (1992). Automotive Engrg., 100(2), 58–61.
11.
“Lubes boost economy.” (1988). Heavy Duty Trucking, 67(9), 72–73.
12.
Lubrication in practice. (1984). W. S. Robertson, ed., Distributed by Marcel Dekker, New York, N.Y.
13.
Modern plastics encyclopedia. (1989). McGraw‐Hill Book Co., Inc., New York, N.Y., 66(11).
14.
“Operation and maintenance of ordnance material in cold weather (0°F to ).” (1989). FM 9‐207, Departments of the Army and the Air Force, Washington, D.C.
15.
Schatz, O. (1991). “Cold start improvements with a heat store.” SAE Tech. Paper No. 910305, Detroit, Mich.
16.
Seal design catalog. (1989). Apple Rubber Products, Inc., Lancaster, N.Y.
17.
Silicone fluids. (1982). Union Carbide Corp., Danbury, Conn.
18.
Smolin, A. P. (1968). “Operation of construction machinery under winter conditions; translated from Ekspluatatsiya Stroitel'nykh Mashin v Zimniky Usloviyakh.” U.S. Army Foreign Science Technology Center, Washington, D.C.
19.
Soudunsaari, R., and Mikkonen, S. (1989). “Hydraulic seals in arctic conditions.” Proc., Subzero Engrg. Conditions Conf., SAE, Rovaniemi, Finland, 77–84.
20.
Storage battery technical service manual. (1987). Battery Council International, Chicago, Ill.
21.
Stupich, T. F. (1987). Cold Regions Operation of Diesel Vehicles with Special Consideration for the M113A1 Armoured Personnel Carrier. Defence Research Establishment Suffield, Ralston, Alberta; Suffield Report No. 408.
22.
Vincent, C. A. (1984). Modern batteries—an introduction to electrochemical power sources. Edward Arnold, Baltimore, Md.
23.
Wilson, L. (1982). “Thermoelectric engine heaters.” Final Report. Global Thermoelectric, Inc., Calgary, Alberta, Canada.
Information & Authors
Information
Published In
Copyright
Copyright © 1992 ASCE.
History
Published online: Sep 1, 1992
Published in print: Sep 1992
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.