Flow Structure and Sediment Motion around Submerged Vanes in Open Channel
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 131, Issue 3
Abstract
The use of submerged vanes to divert sediment movements on seabed and open channel flows are common in many engineering projects. In the present study, experiments were conducted to investigate the characteristics of flow and sediment motion around a submerged vane in a large flume, long, wide, and high, paved with lightweight cylindrical plastic material with specific gravity of 1.05. The size of the uniform plastic material is in diameter and in height. The vane was made of thick steel plate. The height of the vane above the mean bed ranged from one-eighth to one-third of the flow depth and its length is between . The alignment of the vane to the approach flow varied from 15° to 90°. The effectiveness of the submerged vane in sediment diversion depends on the vane alignment to the approach flow, and the height and length of the vane. The optimum skew angle to the approach flow for the purpose of sediment diversion is about 30°. The optimum vane height of two to three times the height of the bedform would be able to resist the bedload “escaping” over the bedform crest.
Get full access to this article
View all available purchase options and get full access to this article.
References
Asono, T., Odgaard, A. J., and Kennedy, J. F. (1984). “Prevention of local scouring at river-bend by Iowa vanes.” J. Hydrosci. Hydr. Eng., 2, 1–13.
Barkdoll, B. D., Hagen, B. L., and Odgaard, A. J. (1995). “Sediment exclusion at hydropower intakes using submerged vanes.” Waterpower-Proc., Int. Conf. on Hydropower, Vol. 3, ASCE, Reston Va., 1915–1924.
Bhuiyan, F., and Hey, R. (2002). “Sediment transport in a meandering channel with instream hydraulic structures.” River Flow 2002, Vol. II, D. Bousmar and Y. Zech, eds., 1091–1098.
Drain, M. A., Hotchkiss, R. H., Hendrickson, M. C., and Holloway, R. E. (1995). “Hydraulic model investigation of submerged vanes for the intake structure at Fort Calhoun Station.” Proc., Int. Water Resources Eng. Conf., Vol. 2, ASCE, Reston, Va. 1234–1238.
Fang, D., and Yu, G. (1993). “A study on the efficiency of a vortex tube sediment trap.” Proc., 25th Int. Hydraulics Conf..
Huang, J. K., and Shi, Z. Y. (2001). “The characteristics of the sand motion trained by bottom panel.” J. Sediment Res., No. 6, (in Chinese).
Marelius, F., and Sinha, S. K. (1998). “Experimental investigation of flow past submerged vanes.” J. Hydraul. Eng., 124(5), 542–545.
Marelius, F., and Sinha, S. K. (2000). “Analysis of flow past submerged vanes.” J. Hydraul. Eng., 38(1), 65–71.
Melville, B. W., and Raudkivi, A. J. (1977). “Flow characteristics in local scour at bridge piers.” J. Hydraul. Eng., 15, 373–380.
Odgaard, A. J., and Kennedy, J. F. (1983). “River-bend bank protection by submerged vanes.” J. Hydraul. Eng., 109(8), 1161–1173.
Odgaard, A. J., and Spoljaric, A. (1986). “Sediment control by submerged vanes.” J. Hydraul. Eng., 112(12), 1164–1181.
Odgaard, A. J., and Mosconi, C. E. (1987). “Streambank protection by submerged vanes.” J. Hydraul. Eng., 113(4), 520–536.
Odgaard, A. J., and Wang, Y. (1991a). “Sediment management with submerged vanes. I: Theory.” J. Hydraul. Eng., 117(3), 267–283.
Odgaard, A. J., and Wang, Y. (1991b). “Sediment management with submerged vanes: Applications.” J. Hydraul. Eng., 117(3), 284–302.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: Mar 6, 2003
Accepted: Sep 9, 2004
Published online: May 1, 2005
Published in print: May 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.