Performance of Coastal Structures against Sequences of Hurricanes
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 129, Issue 5
Abstract
A synthesis of existing models and formulas is made to compute the virtual performance of rubble mound structures in shallow water under combined storm surge and breaking waves for sequences of hurricanes. The computed results for ten 500-year simulations are presented for a typical structure as an example. The crest height and armor weight of the structure are designed against the peak of a 100-year storm. The structure designed conventionally is exposed to approximately 350 storms for each 500-year simulation. The computed wave overtopping rate and volume during the entire duration of each storm are analyzed to assess the severity of flooding hazards. The computed progression of damage to the armor layer is caused episodically by several major storms but slows down as the structure ages. The computed results are also used to quantify the equivalent duration of the peak of a storm that yields the same overtopping water volume and damage increment as those computed for the entire storm duration.
Get full access to this article
View all available purchase options and get full access to this article.
References
Battjes, J. A., and Groenendijk, H. A.(2000). “Wave height distributions on shallow foreshores.” Coastal Eng., 40, 161–182.
Battjes, J. A., and Stive, M. J. F.(1985). “Calibration and verification of a dissipation model for random breaking waves.” J. Geophys. Res., 90(C5), 9159–9167.
Booij, N., Ris, R. C., and Holthuijsen, L. H.(1999). “A third-generation wave model for coastal regions. 1. Model description and validation.” J. Geophys. Res., 104(C4), 7649–7666.
Cardone, V. J., Greenwood, C. V., and Greenwood, J. A. (1992). “Unified program for the specification of hurricane boundary layer winds over surfaces of specified roughness.” Rep. No. CERC-92-1, U.S. Army Corps of Engineers Waterways Experiment Station, Vicksburg, Miss.
Goda, Y. (1985). Random seas and design of maritime structures, University of Tokyo Press, Tokyo.
Hanzawa, M., Sato, H., Takahashi, S., Shimosako, K., Takayama, T., and Tanimoto, K. (1997). “New stability formula for wave-dissipating concrete blocks covering horizontally composite breakwaters.” Coastal Engineering 1996, Proc., 25th Coastal Engineering Conf., ASCE, New York, 1665–1678.
Johnson, B. D., and Kobayashi, N. (1999). “Nonlinear time-averaged model in surf and swash zones.” Coastal Engineering 1998, Proc., 26th Coastal Engineering Conf., ASCE, Reston, Va., 2785–2798.
Johnson, B. D., and Kobayashi, N. (2001). “Free surface statistics and probabilities in surf zones on beaches.” Coastal Engineering 2000, Proc., 27th Coastal Engineering Conf., ASCE, Reston, Va., 1022–1035.
Kearney, P. G., and Kobayashi, N. (2001). “Time-averaged probabilistic model for irregular wave runup on coastal structures.” Coastal Engineering 2000, Proc., 27th Coastal Engineering Conf., ASCE, Reston, Va., 2004–2017.
Kobayashi, N., and Johnson, B. D. (1998). “Computer program CSHORE for predicting cross-shore transformation of irregular breaking waves.” Research Rep. No. CACR-98-04, Center for Applied Coastal Research, Univ. of Delaware, Newark, Del.
Kriebel, D. L. (1982). “Beach and dune response to hurricanes.” Master’s thesis, Dept. of Civil Engineering, Univ. of Delaware, Newark, Del.
Kriebel, D. L., and Dean, R. G. (1985). “Beach and dune response to severe storms.” Coastal Engineering 1984, Proc., 19th Coastal Engineering Conf., ASCE, New York, 1584–1599.
Melby, J. A., and Kobayashi, N.(1998). “Progression and variability of damage on rubble mound breakwaters.” J. Waterw., Port, Coastal, Ocean Eng., 124(6), 286–294.
Melby, J. A., and Kobayashi, N. (2001). “Damage development on stone-armored rubble mounds.” Coastal Engineering 2000, Proc., 27th Coastal Engineering Conf., ASCE, Reston, Va., 1571–1584.
Pozueta, B., and Kobayashi, N. (2002). “Performance of coastal struc-tures under combined storm surge and breaking waves for sequences of hurricanes.” Research Rep. No. CACR-02-02, Center for Applied Coastal Research, Univ. of Delaware, Newark, Del.
Raubenheimer, B., Guza, R. T., and Elgar, S.(1996). “Wave transformation across the inner surf zone.” J. Geophys. Res., 101(C10), 25589–25597.
Raubenheimer, B., Guza, R. T., and Elgar, S.(2001). “Field observations of wave-driven setdown and setup.” J. Geophys. Res., 106(C3), 4629–4638.
Sarpkaya, T., and Isaacson, M. (1981). Mechanics of wave forces on offshore structures, Van Nostrand Reinhold, New York.
Scheffner, N. W., Borgman, L. E., and Mark, D. J.(1996). “Empirical simulation technique based storm surge frequency analyses.” J. Waterw., Port, Coastal, Ocean Eng., 122(2), 93–101.
Shore protection manual. (1977). Coastal Engineering Research Center, U.S. Government Printing Office, Washington, D.C.
Shore protection manual. (1984). Coastal Engineering Research Center, U.S. Government Printing Office, Washington, D.C.
Smith, W. G., Kobayashi, N., and Kaku, S. (1993). “Profile changes of rock slopes by irregular waves.” Coastal Engineering 1992, Proc., 23rd Coastal Engineering Conf., ASCE, New York, 1559–1572.
van der Meer, J. W.(1988a). “Deterministic and probabilistic design of breakwater armor layers.” J. Waterw., Port, Coastal, Ocean Eng., 114(1), 66–80.
van der Meer, J. W. (1988b). “Rock slopes and gravel beaches under wave attack.” Communication No. 396, Delft Hydraulic Research, Emmeloord, The Netherlands.
van der Meer, J. W., and Janssen, J. P. F. M. (1995). “Wave runup and wave overtopping at dikes.” Wave forces on inclined and vertical wall structures, ASCE, New York, 1–27.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Jul 2, 2002
Accepted: Jan 23, 2003
Published online: Aug 15, 2003
Published in print: Sep 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.