A Fall-Velocity Equation
This article has a reply.
VIEW THE REPLYPublication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 126, Issue 2
Abstract
Over the last several decades, there has been a conspicuous increase in the coastal engineering literature in the use of the fall velocity as a variable to characterize sediment. The increasing interest in fall velocity reflects acknowledgment of the fundamental physical importance of this variable in littoral sedimentation processes. One difficulty in using the fall velocity has been that there was no continuous equation to calculate fall velocity over a wide range of conditions. An equation is developed to calculate sediment fall velocities and is shown to fit a large data set well over a wide range of conditions. The equation was carefully calibrated to the quartz sand subset of the data and found to fit that subset very well; rms error was about 8%. The equation also approaches logical limiting values for laminar and turbulent flow regimes. Simple equations to calculate the kinematic viscosity of sea water and freshwater are also given.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahrens, J. P., and Seelig, W. N. (1996). “Wave runup on beaches.” Proc., 25th Int. Conf. on Coast. Engrg., ASCE, New York, 981–993.
2.
Battjes, J. A. (1974). “Surf similarity.” Proc., 14th Int. Conf. on Coast. Engrg., ASCE, New York, 466–479.
3.
Dalrymple, R. A., and Thompson, W. (1976). “Study of equilibrium beach profiles.” Proc., 15th Int. Conf. on Coast. Engrg., ASCE, New York, 1277–1296.
4.
Dalyrymple, R. A. (1992). “Prediction of storm/normal beach profiles.”J. Wtrwy., Port, Coast., and Oc. Engrg., 118(2), 193–200.
5.
Dean, R. G. (1973). “Heuristic models of sand transport in the surf zone.” Proc., Conf. on Engrg. Dyn. in the Surf Zone, Institution of Engineers, Sydney, Australia, 208–214.
6.
Dean, R. G. (1987). “Coastal sediment processes: Towards engineering solutions.” Proc., Coast. Sediments '87, ASCE, New York, 1–24.
7.
Hallermeier, R. J. (1981). “Terminal settling velocity of commonly occurring sand grains.” Sedimentology, 28, 859–865.
8.
Kraus, N. C., Larson, M., and Kriebel, D. L. (1991). “Evaluation of beach erosion and accretion predictors.” Proc., Coast. Sediments '91, ASCE, New York, 572–587.
9.
Kriebel, D. L., Dally, W. R., and Dean, R. G. (1986). “Undistorted Froude model for surf zone sediment transport.” Proc., 20th Int. Conf. on Coast. Engrg., ASCE, New York, 1295–1309.
10.
Newman, J. N. (1977). Marine hydrodynamics. The MIT Press, Cambridge, Mass.
11.
Noda, E. K. (1972). “Equilibrium beach profile scale-model relationship.” J. Wtrwy., Harbors and Coast Engrg., 98(4), 511–528.
12.
Shore Protection Manual. (1984). 4th Ed., Vol. 1, Coastal Engineering Research Ctr., U.S. Army Corps of Engineers, Washington, D.C.
13.
Wright, L. D., and Short, A. D. ( 1984). “Morphodynamic variability of surf zones and beaches: A synthesis.” Marine Geol., 56, Elsevier Science, Amsterdam, 93–118.
Information & Authors
Information
Published In
History
Received: Jan 14, 1999
Published online: Mar 1, 2000
Published in print: Mar 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.