Sediment Transport under Sheet-Flow Conditions
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 121, Issue 5
Abstract
Experiments on sediment transport under sheet-flow conditions were conducted by tracing individual and grouped light plastic particles. The measurements based on individual particles yielded the vertical and temporal variations of the instantaneous sediment concentration and transport velocity from which the sediment-transport rate per unit width was obtained. In addition, moving areas of painted particle groups were measured to estimate instantaneous sediment transport rates per unit width directly. Measured local sediment-transport rates were the largest at one or two particle diameters above the initial bed surface. Instantaneous sediment-transport rates per unit width exhibited a π/6 phase lead relative to the free-stream velocity. The measured sediment-transport rates averaged over a half-cycle were compared with forcing functions Shields and mobility parameters. The present data as well as most available existing data in terms of the normalized transport rate without the settling velocity were well arranged by the mobility number to the power of 1.5.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ahilan, R. V., and Sleath, J. F. A.(1987). “Sediment transport in oscillatory flow over flat beds.”J. Hydr. Engrg., ASCE, 113(3), 308–322.
2.
Asano, T. (1990). “Two-phase flow model on oscillatory sheet flow.”Proc., 22nd Coast. Engrg. Conf., ASCE, New York, N.Y., 2372–2384.
3.
Asano, T. (1992). “Observations of granular-fluid mixture under an oscillatory sheet flow.”Proc., 23rd Coast. Engrg. Conf., ASCE, New York, N.Y., 1896–1909.
4.
Dibajnia, M., and Watanabe, A. (1992). “Initiation and transport rate of sheet flow under nonlinear waves and currents.”Proc., 23rd Coast. Engrg. Conf., ASCE, New York, N.Y., 2015–2028.
5.
Dick, J. E., and Sleath, J. F. A. (1991). “Velocities and concentrations in oscillatory flow over beds of sediments.”J. Fluid Mech., Vol. 233, 165–196.
6.
Dingler, J. R., and Inman, D. L. (1976). “Wave-formed ripples in nearshore sands.”Proc., 15th Coast. Engrg. Conf., ASCE, New York, N.Y., 2109–2126.
7.
Hanes, D. M., and Bowen A. J. (1985). “A granular-fluid model for steady intense bed-load transport.”J. Geo. Res., 90(C5), 9149–9158.
8.
Horikawa, K., Watanabe, A., and Katori, S. (1982). “Sediment transport under sheet flow condition.”Proc., 18th Coast. Engrg. Conf., ASCE, New York, N.Y., 1335–1352.
9.
Jonsson, I. G. (1966). “Wave boundary layers and friction factors.”Proc., 10th Coast. Engrg. Conf., ASCE, New York, N.Y., 127–148.
10.
Komar, P. D., and Miller, M. C.(1974). “The initiation of oscillatory ripple marks and the development of plane-bed at high stresses under waves.”J. Sed. Petrology, 45(3), 697–703.
11.
Madsen. O. S., and Grant W. D. (1976). “Quantitative description of sediment transport by waves.”Proc., 15th Coast. Engrg. Conf., ASCE, New York, N.Y., 1093–1112.
12.
Ribberink, J. S., and Al-Salem, A. (1990). “Bedforms, sediment concentrations and sediment transport in simulated wave conditions.”Proc., 22nd Coast. Engrg. Conf., ASCE, New York, N.Y., 2318–2331.
13.
Sawamoto, M., and Yamashita, T.(1986). “Sediment transport rate due to wave action.”J. Hydrosci. and Hydr. Engrg., Tokyo, Japan, 4(1), 1–15.
14.
Sleath, J. F. A.(1978). “Measurements of bed load in oscillatory flow.”J. Wtrwy. Port, Coast., Oc. Engrg. Div., ASCE, 104(3), 291–307.
Information & Authors
Information
Published In
Copyright
Copyright © 1995 American Society of Civil Engineers.
History
Published online: Sep 1, 1995
Published in print: Sep 1995
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.