Performance of a Wedge‐Type Absorbing Wave Maker
Publication: Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 115, Issue 1
Abstract
Design criteria for absorbing wave makers are presented and their implementation illustrated by reference to the conversion of a conventional wave maker with a wedge‐type paddle. Measurements obtained with both regular and irregular waves demonstate that the requried feedback loop in the wave maker's control circuit can be successfully based on a conventional wage gage. Furthermore, it is shown that good absorption characteristics can be achieved with a lessthan‐perfect circuit design. Comparison of results obtained both with and without absorption highlight some of the dangers of investigating the behavior of reflective coastal structures in a laboratory channel equipped with a conventional wave maker. It is shown that the multiple reflection of irregular waves between a test structure and a nonabsorbing wave maker can produce systematic changes in the incident wave climate that it would be difficult to rectify. Generally the full consequences of such changes will be unknown but they could be very serious. Thus, it is strongly recommended that tests on reflective structures should be carried out only with absorbing wave makers.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Biesel, F., and Suquet, F. (1951). “Les appareils générateurs de houle en laboratoire.” La Houille Blanche, Paris, France, 6(2,4,5) and 7(6). (English trans.: Project Rept. 39, St. Anthony Falls Hydr. Lab., Minnesota Univ., Minneapolis, Minn.
2.
Bullock, G. N., and Short, I. (1985). “Water particle velocities in regular waves.” J. Wtrway, Port, Coast., and Oc. Engrg., ASCE, 111(2), 189–200.
3.
Fryer, D. K., Gilbert, G., and Wilkie, M. J. (1973). “A wave spectrum synthesizer.” J. Hydraul. Res., 11(3), 193–204.
4.
Gabriel, D. W., and Hedges, T. S. (1986). “Effects of currents on interpretation of sub‐surface pressure spectra.” Coastal Eng., 10, 309–323.
5.
Gilbert, G. (1978). “Absorbing wave generators.” Hydr. Res. Station Notes. Hydr. Res. Station, Wallingford, Oxon., United Kingdom, 20, 3–4.
6.
Gilbert, G., and Thompson, D. M. (1987). Reflections in random waves: The frequency response function method. Report No. IT 173, Hydr. Res. Station, Wallingford, Oxon, United Kindgom.
7.
Gilbert, G., Thompson, D. M., and Brewer, A. J. (1970). Design curves for regular and random wave generators. Report No. INT 81, Hydr. Res. Station, Wallingford, Oxon, United Kingdom.
8.
Lynn, P. A. (1982). An introduction to the analysis and processing of signals. 2nd Ed., The Macmillan Press Ltd., London, United Kingdom.
9.
Milgram, J. S. (1970). “Active water‐wave absorbers.” J. Fluid Mech., 43(4), 845–859.
10.
Salter, S. H. (1982). “Absorbing wave‐makers and wide tanks.” Proc. Conf. Directional Wave Spectra Applications, ASCE, 185–200.
11.
Shore protection manual (1984). Coastal Engrg. Res. Center, U.S. Anny Corps of Engrs., Washington, D.C., 109–129.
12.
Svendsen, I. A. (1985). “Physical modelling of water waves.” Physical modelling in coastal engineering, A. A. Balkema, Rotterdam, Amsterdam, 13–47.
Information & Authors
Information
Published In
Journal of Waterway, Port, Coastal, and Ocean Engineering
Volume 115 • Issue 1 • January 1989
Pages: 1 - 17
Copyright
Copyright © 1989 ASCE.
History
Published online: Jan 1, 1989
Published in print: Jan 1989
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.