Extended Period Simulation Analysis Considering Valve Shutdowns
Publication: Journal of Water Resources Planning and Management
Volume 134, Issue 6
Abstract
Planned (e.g., regular maintenance) and unplanned (e.g. pipe burst) interruptions occur regularly in water distribution systems leading to their reduced performance. This paper presents an extended period simulation model capable of assessing system’s performance under these conditions. The extended period simulation model is based on the recently developed steady-state pressure driven hydraulic model and is capable of calculating pressures, flows, and hence actual water demands delivered under modified network topology conditions (caused by the use of isolation valves). The model is accompanied by several reliability indicators which can be used to assess system’s performance under interruptions. The above-mentioned methodology is demonstrated on a real-life case study in Italy. The role of isolation valve design and uncertainty in valve operability is analyzed and discussed. The case study results obtained demonstrate that the least cost design/rehabilitation of water distribution systems is likely to result in unreliable systems if the actual network configurations obtained by closing isolation valves in abnormal working conditions are not taken into account.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ackley, J. R. L., Tanyimboh, T. T., Tahar, B., and Templeman, A. B. (2001). “Head-driven analysis of water distribution systems.” Proc. of Computer and Control in Water Industry (CCWI), Water Software Systems: Theory and Applications, B. Ulanicki, B. Coulbeck, and J. Rance, eds., Vol. 1, Research Studies Press, England, 183–192.
Ang, W. K., and Jowitt, P. W. (2006). “Solution of water distribution systems under pressure deficient conditions.” J. Water Resour. Plann. Manage., 132(3), 175–182.
Berardi, L., Kapelan, Z., Giustolisi, O., and Savic, D. A. (2008). “Assessment of performance indicators for water systems.” J. Hydroinform., 10(2), 113–126.
Berardi, L., Savic, D. A., and Giustolisi, O. (2005). “Investigation of burst-prediction formulas for water distribution systems by evolutionary computing.” Proc., Eight Int. Conf. on Computing and Control for the Water Industry, D. A. Savic, G. A. Walters, R. King, and S.-T. Khu, eds., Vol. 2, Univ. of Exeter, U.K., 275–280.
Chandapillai, J. (1991). “Realistic simulation of water distribution system.” J. Transp. Eng., 117(2), 258–263.
Farmani, R., Walters, G. A., and Savic, D. A. (2005). “Trade-off between total cost and reliability for anytown water distribution network.” J. Hydrol. Eng., 131(3), 161–171.
Fujiwara, O., and Li, J. (1998). “Reliability analysis of water distribution networks in consideration of equity, redistribution, and pressure-dependent demand.” Water Resour. Res., 34(7), 1843–1850.
Gargano, R., and Pianese, D. (2000). “Reliability as tool for hydraulic network planning.” J. Hydraul. Eng., 126(5), 354–364.
Giustolisi, O., Kapelan, Z., and Savic, D. A. (2008). “An algorithm for automatic detection of topological changes in water distribution networks.” J. Hydraul. Eng., 134(4), 435–446.
Golub, G. H., and Van Loan, C. F. (1993). Matrix computations, The Johns Hopkins University Press, London.
Goulter, I. C. (1995). “Analytical and simulation models for reliability analysis in water distribution systems.” Improving efficiency and reliability in water distribution systems, E. Cabrera and A. F. Vela, eds., Kluwer Academics, London, 235–266.
Gupta, R., and Bhave, P. R. (1996). “Comparison of methods for predicting deficient-network performance.” J. Hydrol. Eng., 122(3), 214–217.
Jun, H., and Loganathan, G. V. (2007). “Valve-controlled segments in water distribution systems.” J. Hydrol. Eng., 133(2), 145–155.
Kalungi, P., and Tanyimboh, T. (2003). “Redundancy model for water distribution systems.” Reliab. Eng. Syst. Saf., 82(3), 275–286.
Kettler, A. J., and Goulter, I. C. (1985). “An analysis of pipe breakage in urban water distribution networks.” Can. J. Civ. Eng., 12(2), 286–293.
Kleiner, Y., and Rajani, B. B. (1999). “Using limited data to assess future needs.” J. Am. Water Works Assoc., 91(7), 47–62.
Kleiner, Y., and Rajani, B. B. (2001). “Comprehensive review of structural deterioration of water mains: Statistical models.” Urban Water, 3(3), 121–150.
Kleiner, Y., and Rajani, B. B. (2002). “Forecasting variations and trends in water-main breaks.” J. Infrastruct. Syst., 8(4), 122–131.
Pelletier, G., Mailhot, A., and Villeneuve, J. P. (2003). “Modeling water pipe breaks—Three case studies.” J. Hydrol. Eng., 129(2), 115–123.
Prasad, T. D., and Park, N. S. (2004). “Multiobjective genetic algorithms for design of water distribution networks.” J. Hydrol. Eng., 130(1), 73–82.
Reddy, L., and Elango, R. (1989). “Analysis of water distribution networks with head-dependent outlets.” Civ. Eng. Environ. Syst., 6(3), 102–110.
Savic, D. A., and Walters, G. A. (1997). “Genetic algorithms for the least-cost design of water distribution networks.” J. Hydrol. Eng., 123(2), 67–77.
Shamir, U., and Howard, C. D. D. (1979). “An analytic approach to scheduling pipe replacement.” J. Am. Water Works Assoc., 117(5), 248–258.
Tanyimboh, T. T., Tabesh, M., and Burrows, R. (2001). “Appraisal of source head methods for calculating reliability of water distribution networks.” J. Hydrol. Eng., 127(4), 206–213.
Todini, E. (2000). “Looped water distribution networks design using a resilience index based heuristic approach.” Urban Water, 2(2), 115–122.
Todini, E. (2003). “A more realistic approach to the ‘extended period simulation’ of water distribution networks.” Advances in water supply management, C. Maksimovic, D. Butler, and F. A. Memon, eds., Balkema, Lisse, The Netherlands, 173–184.
Tolson, B. A., Maier, H. R., Simpson, A. R., and Lence, B. J. (2004). “Genetic algorithms for reliability-based optimization of water distribution systems.” J. Water Resour. Plann. Manage., 130(1), 63–72.
Wagner, J. M., Shamir, U., and Marks, D. H. (1988). “Water distribution reliability: Simulation methods.” J. Water Resour. Plann. Manage., 114(3), 276–294.
Walski, T. M. (1993a). “Practical aspects of providing reliability in water distribution systems.” Reliab. Eng. Syst. Saf., 42(1), 13–19.
Walski, T. M. (1993b). “Water distribution valve topology” Reliab. Eng. Syst. Saf., 42(1), 21–27.
Walski, T. M. (2001). “The wrong paradigm—Why water distribution doesn’t work?” J. Water Resour. Plann. Manage., 127(4), 203–205.
Walski, T. M., and Pelliccia, A. (1982). “Economics analysis of water main breaks.” J. Am. Water Works Assoc., 74(3), 140–147.
Walski, T. M., Weiler, J., and Culver, T. (2006). “Using criticality analysis to identify the impact of valve location.” 8th Water Distribution System Analysis Symp. (CD-ROM), ⟨http://cebd.asce.org⟩.
Xu, C., and Goulter, I. C. (1998). “Probabilistic model for water distribution reliability.” J. Water Resour. Plann. Manage., 124(4), 218–228.
Xu, C., and Goulter, I. C. (1999). “Reliability-based optimal design of water distribution network.” J. Hydrol. Eng., 125(6), 352–362.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Mar 5, 2007
Accepted: Apr 15, 2008
Published online: Nov 1, 2008
Published in print: Nov 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.