Estimation of Peak Flow and Runoff Volume with Response Surface Method
Publication: Journal of Water Resources Planning and Management
Volume 120, Issue 2
Abstract
The probabilistic‐based calibration strategy developed in this paper was briefly reviewed and applied to derive the optimum values of eight calibration parameters. Three optimum sets are obtained: estimations of peak flow, runoff volume, and both peak flow and runoff volume. Data for each of three storms were used to calibrate and verify the model for a catchment in Singapore to demonstrate the application of the calibration methodology. The calibration results indicate that: (1) The derived optimal values approximate the global optimum; (2) a close agreement between the simulated and the measured catchment responses (peak flow or runoff volume) could be achieved when only one specific objective function is considered at a time; and (3) a reasonably good match between the simulated and the measured hydrographs could be achieved, however, when both catchment responses (the peak flow and the runoff volume) are simultaneously considered. The verification simulations also indicate reasonably good comparisons between the simulated and the measured data.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
ASCE Task Committee on Evaluation Criteria for Watershed Models (1990). “Summary report: Evaluation criteria for watershed models.” Proc. Symp. on Watershed Mgmt. of the Irrig. and Drain., R. E. Riggins et al., eds., 386–394.
2.
Baffaut, C., and Delleur, J. W. (1989). “Expert system for calibrating SWMM.” J. Water Resour. Plng. and Mgmt., ASCE, 115(3), 278–298.
3.
Draper, N. R., and Smith, H. (1981). Applied regression analysis. 2nd Ed., John Wiley and Sons, New York, N.Y.
4.
Duan, Q., Sorooshian, S., and Gupta, V. (1992). “Effective and efficient global optimization for conceptual rainfall‐runoff models.” Water Resour. Res., 28(4), 1015–1031.
5.
Gupta, V. K., and Sorooshian, S. (1985). “The automatic calibration of conceptual catchment models using derivative‐based optimization algorithms.” Water Resour. Res., 21(4), 473–485.
6.
Huber, W. C., Heaney, J. P., Nix, S. J., Dickonson, R. E., and Polman, D. J. (1982). Storm water management model, user's manual, version III. U.S. Envir. Protection Agency, Cincinnati, Ohio.
7.
Ibbitt, R. P., and O'Donnell, T. (1971). “Fitting methods for conceptual catchment models.” J. Hydr. Div., ASCE, 7(9), 1331–1342.
8.
Ibrahim, Y., and Liong, S. Y. (1992). “Calibration strategy for urban catchment parameters.” J. Hydr. Engrg., ASCE, 118(11), 1550–1570.
9.
Johnston, P. R., and Pilgrim, D. H. (1976). “Parameter optimization for watershed models.” Water Resour. Res., 12(3), 477–486.
10.
Liong, S. Y., Chan, W. T., and Lum, L. H. (1991). “Knowledge based system for SWMM runoff component calibration.” J. Water Resour. Plng. and Mgmt., ASCE, 117(5), 507–524.
11.
Madsen, H. O., Krenk, S., and Lind, N. C. (1986). “Methods of structural safety.” Prentice Hall, Englewood Cliffs, N.J.
12.
Mein, R. G., and Brown, B. M. (1978). “Sensitivity of optimized parameters in watershed models.” Water Resour. Res., 14(5), 229–303.
13.
Myers, R. (1971). Response surface methodology. Allyn and Bacon Inc., Boston, Mass.
14.
Wang, Q. J. (1991). “The genetic algorithm and its application to calibrating conceptual rainfall‐runoff models.” Water Resour. Res., 27(9), 2467–2471.
Information & Authors
Information
Published In
Copyright
Copyright © 1994 American Society of Civil Engineers.
History
Received: Jan 4, 1993
Published online: Mar 1, 1994
Published in print: Mar 1994
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.