Optimal Configuration and Scheduling of Ground‐Water Tracer Test
Publication: Journal of Water Resources Planning and Management
Volume 117, Issue 1
Abstract
A technique for jointly configuring and scheduling a monitoring network for an aquifer tracer test is presented. A dynamic programming (DP) algorithm is used to select among competing designs for a test to provide data for estimating aquifer model parameters. A maximal information criterion is used to evaluate competing designs that satisfy a particular budget constraint. Decision variables in DP formulation are sampling locations (configuration variables) and sampling initiation times (scheduling variables). A forward DP solution method is used, optimal configuration and scheduling are determined by maximizing information without exceeding a budget. Maximization of information is argued to be equivalent to minimizing total cost of installation as well as sampling and analysis subject to an information demand function constructed from the trace of the co‐variance matrix of the estimated parameters. A tracer test for a confined aquifer is simulated using a finite difference scheme. A short injection period followed by a monitoring period is simulated. The DP algorithm is applied to this model to design a monitoring network and schedule to estimate aquifer characteristics. The sampling network and schedule is designed with estimation of transmissivity, retardation, and dispersivities in mind. Resulting designs are reasonable, and the method can be extended to regional‐sized problems with little modification.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Bear, J. (1972). Dynamics of fluids in porous media. Elsevier, New York, N.Y.
2.
Bear, J. (1979). Hydraulics of groundwater. McGraw‐Hill, New York, N.Y.
3.
Bear, J., and Verruijt, A. (1987). Modelling groundwater flow and pollution. Reidel, Boston, Mass.
4.
Becker, L., and Yeh, W. W.‐G. (1974). “Optimal timing, sequencing, and sizing of multiple reservoir surface water supply facilities.” Water Resour. Res., 10(1), 57–62.
5.
Carrea, J., Usnoff, E., Szidarovsky, F. (1984). “A method for optimal observation network design for groundwater management.” J. Hydr., 73, 147–163.
6.
Cleveland, T. G. (1990). “Sampling strategies for transport parameter identification,” thesis presented to the University of California, Los Angeles, at Los Angeles, Calif., in partial fulfillment of the requirements for the degree of Doctor of Philosophy.
7.
Cleveland, T. G., and Yeh, W. W.‐G. (1989). “Sampling network design for transport parameter identification.” J. Water Resour. Plng. and Mgmt., ASCE, 116(6).
8.
Hsu, N. S., Yeh, W. W.‐G. (1989). “Optimum experimental design for parameter identification in groundwater hydrology.” Water Resour. Res., 25(5), 1025–1040.
9.
Knoppman, D. S., and Voss, C. I. (1987). “Behavior of sensitivities in the one‐dimensional advection‐dispersion equation: Implications for parameter estimation and optimal design.” Water Resour. Res., 23(2), 253–272.
10.
Knoppman, D. S., and Voss, C. I. (1988). “Discrimination among one‐dimensional models of solute transport in porous media: Implications for sampling design.” Water Resour. Res., 24(11), 1859–1876.
11.
Loaciga, H. (1989). “An optimization approach for groundwater quality monitoring network design.” Water Resour. Res., 25(8), 1771–1782.
12.
McCarthy, J. M., and Yeh, W. W.‐G. (1990). “Optimal pumping test design for parameter estimation and prediction in groundwater hydrology.” Water Resour. Res., 26(4), 779–791.
13.
Meyer, P. D., and Brill, D. (1988). “A method for locating wells in a groundwater monitoring network under conditions of uncertainty.” Water Resour. Res., 24(8), 1277–1282.
14.
Nishikawa, T., and Yeh, W. W.‐G. (1989). “Optimal pumping test design for the parameter identification of groundwater systems.” Water Resour. Res., 25(7), 1737–1747.
15.
Sacks, J., and Ylvisaker, D. (1968). “Designs of regression problems with correlated errors; Many parameters.” The Annals of Mathematical Statistics, 39(1), 49–69.
16.
Steinberg, D. M., and Hunter, W. G. (1984). “Experimental design: Review and comment.” Technometrics, 26(2), 71–97.
17.
Wagner, B. J., and Gorelick, S. M. (1987). “A statistical methodology for estimating transport parameters: Theory and applications to one‐dimensional advective dispersive systems.” Water Resour. Res., 23(7), 1162–1174.
18.
Yeh, W. W.‐G. (1986). “Review of parameter identification procedures in groundwater hydrology: The inverse problem.” Water Resour. Res., 22(2), 95–108.
19.
Yeh, W. W.‐G., and Sun, N. Z. (1984). “An extended identifiability in aquifer parameter identification and optimal pumping test design.” Water Resour. Res., 20(12), 1837–1847.
20.
Yeh, W. W.‐G., and Yoon, Y. S. (1981). “Aquifer parameter identification with optimum dimension in parameterization.” Water Resour. Res., 17(3), 664–672.
Information & Authors
Information
Published In
Copyright
Copyright © 1991 ASCE.
History
Published online: Jan 1, 1991
Published in print: Jan 1991
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.