Risk‐Cost Design of Pavement Drainage Systems
Publication: Journal of Water Resources Planning and Management
Volume 116, Issue 2
Abstract
A practical method for determining the road surface drainage system design with the theoretical lowest total economic cost (LTEC) is developed. The LTEC method determines the design rain which, when used in a rational‐based design context, will yield the most economic choices of gutters, inlets, and laterals considering both construction costs and risk costs. The method provides an alternative to the use of fixed return period design criteria. Daily rainfall serves as the random variable used in performing the risk analysis. The right‐hand tail of the probability density function for daily rainfall is approximated with a normal curve. A triangular hyetograph of average duration is assumed to be appropriate for representing an individual rainstorm. A nomograph and data selection guide are provided as design aids. Case studies are presented in an appendix. The method, based on minimizing traffic delay costs, applies to freeways, arterials, and major collectors; local streets with low traffic may be excluded.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Corry, M. L., Jones, J. S., and Thompson, P. L. (1981). “The design of encroachments on flood plains using risk analysis.” Hydraulic Engineering Circular No. 17, Federal Highway Administration, Washington, D.C.
2.
15 minute precipitation data: TD‐3269. (1986a). U.S. Department of Commerce, Asheville, N.C.
3.
Hewes, L. I., and Oglesby, C. H. (1963). Highway engineering. John Wiley and Sons, Inc., New York, N.Y.
4.
Hourly precipitation data: TD‐3240. (1986b). U.S. Department of Commerce, Asheville, N.C.
5.
Johnson, F. L., and Chang, F. F. M. (1984). “Drainage of highway pavements.” Hydraulic Engineering Circular No. 12, Federal Highway Administration, Washington, D.C.
6.
A manual on user benefit analysis of highway and bus‐transit improvements. (1977). Amer. Association of State Highway and Transp. Officials, Washington, D.C.
7.
Mays, L. W. (1979). “Optimum design of culverts under uncertainties.” J. Hydr. Div., ASCE, 105(5), 443–460.
8.
Morales, J. M. (1986). “Analytic procedures for estimating freeway traffic congestion.” Public Roads, 50(2), 55–61.
9.
Thunderstorm rainfall. (1947). National Weather Service, Vicksburg, Miss.
10.
Tseng, M. T., Knepp, A. J., and Schmalz. (1974). “Evaluation of flood risk factors in the design of highway stream crossings.” Report No. FHWA‐RD‐75‐54, Federal Highway Administration, Washington, D.C.
11.
Tung, Y., and Mays, L. W. (1980). “Risk analysis for hydraulic design.” J. Hydr. Div., ASCE, 106(5), 893–913.
12.
Yen, B. C., and Chow, V. T. (1983). “Local design storm.” Report No. FHWA‐RD‐82‐063, Federal Highway Administration, Washington, D.C.
13.
Young, G. K., Childrey, M. R., and Trent, R. E. (1974). “Optimal design for highway drainage culverts.” J. Hydr. Div., ASCE, 100(7), 971–993.
14.
Young, G. K., Taylor, R. S., and Costello, L. S. (1970). “Evaluation of the flood risk factor in the design of box culverts.” Report No. FHWA‐RD‐74‐11, Federal Highway Administration, Washington, D.C.
Information & Authors
Information
Published In
Copyright
Copyright © 1990 ASCE.
History
Published online: Mar 1, 1990
Published in print: Mar 1990
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.