Water Distribution Reliability: Simulation Methods
Publication: Journal of Water Resources Planning and Management
Volume 114, Issue 3
Abstract
Following a companion paper on analytical methods, this paper presents simulation as a complementary method for analyzing the reliability of water distribution networks. For this simulation, the distribution system is modeled as a network whose pipes and pumps are subject to failure. Nodes are targeted to receive a given supply at a given head. If this head is not attainable, supply at the node is reduced. Pumps and pipes fail randomly, according to probability distributions with user‐specified parameters. Several reliability measures are estimated with this simulation. Confidence intervals are also supplied for some of these reliability measures. Simulation results are presented for a small network (ten nodes) and a larger network (sixteen nodes). Simulation enables computation of a much broader class of reliability measures than do analytical methods, but it requires considerably more computer time and its results are less easy to generalize. It is therefore recommended that analytical and simulation methods be used together when assessing the reliability of a system and considering improvements.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
“Additional federal aid for urban water distribution systems should wait until needs are clearly established.” (1980). Report to Congress, U.S. General Accounting Office, Washington, D.C., Dec.
2.
Charles Howard and Associates, Ltd. (1984). Water distribution network analysis: SDP8 user's manual. Charles Howard and Associates, Ltd., Victoria, B.C., Canada.
3.
Damelin, E., Shamir, U., and Arad, N. (1972). “Engineering and economic evaluation of the reliability of water supply.” Water Resour. Res., 8(4), 861–877.
4.
Law, A. M., and Kelton, W. D. (1982). Simulation modeling and analysis. McGraw‐Hill, New York, N.Y., 297–302.
5.
Marks, D. H., et al. (1985). Predicting urban water distribution maintenance strategies: a case study of New Haven, Connecticut. Report to the Environmental Protection Agency by the Department of Civil Engineering, Massachusetts Institute of Technology, Cambridge, Mass.
6.
O'Day, K. (1982). “Organizing and analyzing leak and break data for making main replacement decisions.” J. Am. Water Works Assoc., 74(11), 588–594.
7.
Shamir, U., and Howard, C. D. D. (1968). “Water distribution systems analysis.” J. Hydr. Div., ASCE, 94(HY1), 219–234.
8.
Shamir, U., and Howard, C. D. D. (1981). “An analytic approach to scheduling pipe replacement.” J. Am. Water Works Assoc., 73(7), 379–384.
9.
Wagner, J. M., Shamir, U., and Marks, D. H. (1988). “Water distribution reliability: analytical methods.” J. Water Res. Plng. and Mgmt., ASCE, 114(3), 253–275.
10.
Walski, T. M. (1984). “Application of procedures for testing and evaluating water distribution systems.” Technical Report EL‐84‐5, U.S. Army Engineer Waterways Experiment Station, Vicksburg, Miss.
11.
Walski, T. M., and Pelliccia, A. (1982). “Economic analysis of water main breaks.” J. Am. Water Works Assoc., 74(3), 140–147.
12.
Walski, T. M., et al. (1987). “Battle of the network models: epilogue.” J. Water Res. Plng. and Mgmt., ASCE, 113(2), 191–203.
Information & Authors
Information
Published In
Copyright
Copyright © 1988 ASCE.
History
Published online: May 1, 1988
Published in print: May 1988
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.