Fiber-Reinforced Fly Ash Subbases in Rural Roads
This article has a reply.
VIEW THE REPLYThis article has a reply.
VIEW THE REPLYPublication: Journal of Transportation Engineering
Volume 134, Issue 4
Abstract
In the road construction sector, the world is facing a major problem of scarcity of conventional construction materials. On the other hand, there are some materials, which are lying as waste. Some waste products, e.g., fly ash can be utilized as an additive to conventional construction materials. In this study, reinforced fly ash was tried as subbase material. The influence of various reinforced fly ash parameters was planned to be investigated through static and dynamic load tests and semifield tests. It was planned to observe the effect of polypropylene fiber reinforcement on conventional parameters of fly ash such as unconfined compressive strength, modulus of elasticity, shear strength, and California bearing ratio. The effect of reinforcements and confinements on permanent strain, resilient strain, and resilient modulus of fly ash were also studied. Tests were carried out to study the effect of reinforcement on rut depth formation on a model section with simulation of field conditions. Based on the results, it has been concluded that fly ash is suitable in subbase, if it is reinforced with polypropylene fiber.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (1999). “Standard test method for CBR (California bearing ratio) of laboratory-compacted soils.” ASTM D 1883, West Conshohocken, Pa.
ASTM. (2003). “Standard test method for unconsolidated-undrained triaxial compression test for cohesive soils.” ASTM D 2850, West Conshohocken, Pa.
Brown, S. F. (1974). “Repeated load testing of a granular material.” J. Geotech. Engrg. Div., 100(7), 825–841.
Freitag, R. A. (1986). “Soil randomly reinforced with fibers.” J. Geotech. Engrg., 112(8), 823–826.
Hoover, J. M., Moeller, D. T., Pitt, J. M., Smith, S. G., and Wainaina, N. W. (1982). “Performance of randomly oriented, fiber reinforced roadways soils.” Iowa DOT Project No.HR-211, Dept. of Transportation Engineering, Div., Iowa State Univ., 15–35.
Indian Roads Congress. (2001). “Guidelines for the design of flexible pavements.” IRC-37, New Delhi, India, 12–18.
Indian Roads Congress (IRC). (2002). “Rural roads manual.” IRC-SP-20, New Delhi, India, 92–101.
Kumar, P., Chandra, S., and Vishal, R. (2006). “Comparative study of different sub base materials.” J. Mater. Civ. Eng., 18(4), 576–580.
Leonards, G. A., and Bailey, B. (1982). “Pulverized coal ash as structural fill.” J. Geotech. Engrg. Div., 108(4), 517–531.
Lindh, E., and Eriksson, L. (1990). “Sand reinforced with plastic fibers: A field experiment.” Proc., Int. Reinforced Soil Conf., Glasgow, U.K., 471–474.
Maher, M. H. (1990). “Static response of sands reinforced with randomly distributed fibers.” J. Geotech. Engrg., 116(1), 1661–1677.
Pell, P. S. (1978). Development in highway engineering, International Ed., Applied Science, London.
Ranjan, G., Vasan, R. M., and Charan, H. D. (1996). “Probabilistic analysis of randomly distributed fiber-reinforced soil.” J. Geotech. Engrg., 122(6), 419–426.
Santoni, R. L., Tingle, J. S., and Webster, S. L. (2001). “Engineering properties of sand-fiber mixtures for road construction.” J. Geotech. Geoenviron. Eng., 127(3), 258–268.
Sear, L. K. A. (2001). The properties and use of coal fly ash, Telford, London, 1–50.
Tingle, J. S., Santoni, R. S., and Webster, S. L. (2002). “Full scale field tests on discrete fiber reinforced sand.” J. Transp. Eng., 128(1), 9–16.
Information & Authors
Information
Published In
Copyright
© 2008 ASCE.
History
Received: Aug 28, 2006
Accepted: Aug 27, 2007
Published online: Apr 1, 2008
Published in print: Apr 2008
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.