System Partition Technique to Improve Signal Coordination and Traffic Progression
Publication: Journal of Transportation Engineering
Volume 133, Issue 2
Abstract
A heuristic approach to the application of bandwidth-oriented signal timing is proposed based on a system partition technique. The proposed approach divides a large signalized arterial into subsystems with three to five signals in each subsystem. Each subsystem is optimized to achieve the maximum bandwidth efficiency. A one-directional system progression bandwidth, normally in the peak-flow direction, is then formed by appropriately adjusting the offsets between each subsystem. Such an approach provides a signal-timing solution that would achieve maximum progression for the peak direction while still maintaining partial progression for the off-peak direction. Further improvements on signal timing may be achieved by adjusting the phasing sequences at the subsystem boundary locations. A case study is presented to illustrate how the proposed approach can be applied, and the timing solutions are compared with the solutions from traditional signal-timing software. Evaluation of the timing solutions using CORSIM simulation indicates that the proposed approach results in improved bandwidth efficiencies for both directions and improved performance measures such as stops and travel speeds. The proposed heuristic approach is easy to apply using existing signal timing software packages such as PASSER II and Synchro. The proposed approach could also be used to develop new or improved existing bandwidth optimization algorithms.
Get full access to this article
View all available purchase options and get full access to this article.
References
Buckholz, J. W. (1993). “The 10 major pittfalls of coordinated signal timing.” ITE J., 63(8), 27–29.
Chang, E. C. P., Messer, C. J., and Garza, R. U. (1988). “Arterial signal timing optimization using PASSER II-87.” ITE J., 58(11), 27–21.
Gartner, N. A. (1991). “MULTI-BAND approach to arterial traffic signal optimization.” Transp. Res., Part B: Methodol., 25B(1), 55–74.
Husch, D., and Albeck, J. (2003). Synchro 6: Traffic signal software; user guide. Albany, Calif.
Little, J. D. C., Kelson, M. D., and Gartner, N. (1981). “MAXBAND: A program for setting signals on arterials and triangular networks.” Transportation Research Record. 75, Transportation Research Board, Washington, D.C., 40–46.
Messer, C. J., Whitson, R. H., Dudek, C. L., and Romano, E. J. (1973). “A variable-sequence multiphase progression optimization program.” Highway Research Record. 445, Transportation Research Board, Washington, D.C., 24–33.
PASSER II-90 user’s manual. (1990). Texas Transportation Institute, College Station, Tex.
Sripathi, H. K., Gartner, N., and Stamatiadis, C. (1995). “Uniform and variable bandwidth arterial progression schemes.” Transportation Research Record. 1494, Transportation Research Board, Washington, D.C., 135–145.
TRANSYT 7-F user’s manual; version 9.1. (2001). University of Florida, Gainesville, Fla.
TSIS user’s manual; version 5.1. (2003). Federal Highway Administration, Washington, D.C.
Wallace, C. E., and Courage, K. G. (1982). “Arterial progression: New design approach.” Transportation Research Record. 881, Transportation Research Board, Washington, D.C., 53–59.
Yang, X. K. (2001). “Comparison among computer packages in providing timing plans for Iowa Arterial in Lawrence, Kansas.” J. Transp. Eng., 127(4), 314–318.
Information & Authors
Information
Published In
Copyright
© 2007 ASCE.
History
Received: Aug 11, 2005
Accepted: Jun 7, 2006
Published online: Feb 1, 2007
Published in print: Feb 2007
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.